WJET  Vol.3 No.2 , May 2015
Characterization of a 5 Litre Continuous Stirred Tank Reactor
Abstract: Continuous Stirred Tank Reactors (CSTR) are used ubiquitously in chemical process industry for mixing, reactions and crystallizations. The purpose of this research is to study the effect of solute concentration (sodium chloride) on the stirrer speed in a CSTR. The experimental method used in this research is the stop watch and beaker method. The behavior pattern of the fluid in a CSTR can be experimentally verified as an alternative to the mathematical model. The tracer experiments were carried out. The effect of different parameters such as stirring speed, concentration at a steady time interval was analyzed. Experimental data obtained at 0.6 M and 160 rpm gave a curve that is in close agreement to that of theoretical or mathematical model. In other words, the results obtained at a concentration of 0.6 M and 160 rpm are in close agreement with that of early researchers. The paper is divided into five main sections: the first section immediately after the abstract is the introductory section that is basically a review of literature; the second section takes care of the materials and methods; the third section is the experimental procedure and this section takes the shut-down procedure and data processing into consideration; the fourth section is the discussion of experimental results and the last section is the conclusion of the paper.
Cite this paper: Igbokwe, P. , Nwabanne, J. and Gadzama, S. (2015) Characterization of a 5 Litre Continuous Stirred Tank Reactor. World Journal of Engineering and Technology, 3, 25-40. doi: 10.4236/wjet.2015.32003.

[1]   Bakker, A., Haidari, A.H. and Marshall, E.M. (2001) Design Reactors via CFD. Fluent INC.

[2]   Berty, J.M. (1999) Experiments in Catalytic Reaction Engineering. Elsevier, New York, 56.

[3]   Choi, B.S., Wan, B., Philyaw, S., Dhanasekharan, K. and Ring, T.A. (2004) Residence Time Distributions in a Stirred Tank: Comparison of CFD Predictions with Experiment. Industrial & Engineering Chemistry Research, 43, 6548-6556.

[4]   Fogler, H.S. (2006) Elements of Chemical Reaction Engineering. 4th Edition, Prentice Hall, Upper Saddle River, 869-878.

[5]   Bancroft, G.N., Sikavitsas, V.I. and Mikos, A.G. (2003) Design of a Flow Perfusion Bioreactor System for Bone Tissue-Engineering Applications. Tissue Engineering, Part C Methods, 18, 817-820.

[6]   Josh, H., Meysing, D. and Samli, A. (2008) Development of a Mathematical Model in a Continuous Stirred Tank Reactor. 18.

[7]   Speight, J.G. (2002) Chemical and Process Design Handbook. McGraw-Hill, New York, 54-67

[8]   Campolo, M. and Soldati, A. (2004) Numerical Evaluation of Mixing Time in a Tank Reactor Stirred by a Magnetically Driven Impeller. Industrial & Engineering Chemistry Research, 43, 36-46

[9]   Davis, M.E. and Davis, R.J. (2003) Fundamentals of Chemical Reaction Engineering. McGraw Hill, New York, 23-33.

[10]   Levenspiel, O. (1999) Chemical Reaction Engineering. 3rd Edition. John Wiley & Sons, New York, 54.

[11]   Perry, R.H. and Green, D.W. (2006) Perry’s Chemical Engineers’ Handbook. 7th Edition. McGraw Hill, New York, 23-46-23-48.