Back
 IJCNS  Vol.8 No.4 , April 2015
Energy-Saving Technology in Indoor LTE System with DTX Based on CQI
Abstract: In LTE (Long Term Evolution) system, CQI (Channel Quality Indication) is a technical method to realize adaptive modulation and coding. The dispatcher of BS (base station) would allocate resource blocks to users dynamically based on CQI of uplink and downlink channels, which is necessary in the process of uplink and downlink transmission [1]. When the CQI level of the channel is high, the energy efficiency is high. On the contrary, when the CQI level of the channel is low, the energy efficiency is low. However, if signals are not transmitted until the quality of the channel is good, energy loss may be lowered in the expense of group delay. That is to say, we take CQI into account on the basis of the technology of DTX [2] [3] (Discontinuous Transmission). According to the result of simulation, the energy consumption can be reduced by using our proposed scheme. Particularly, the energy-saving effect is significant when the load is low.
Cite this paper: Yang, Z. , Shang, Y. , Chen, D. and Zhang, X. (2015) Energy-Saving Technology in Indoor LTE System with DTX Based on CQI. International Journal of Communications, Network and System Sciences, 8, 50-57. doi: 10.4236/ijcns.2015.84006.
References

[1]   Zhang, X. (2008) Research of Key Technology and the System-Level Simulation of 3GPP LTE. Wuhan University of Technology, Wuhan.

[2]   Shen, L.Y. and Lou, P.D. (2012) Energy-Saving Mechanism of LTE System Based on the Technology of Cell DTX. Telecom Engineering Technics and Standardization, 9, 67-72.

[3]   Ericsson, ST-Ericsson (2009) Extended Cell DTX for Enhanced Energy-Efficient Network Operation. 3GPP TSG- RAN WG1#59, R1-095011.

[4]   Liu, L., Pi, L.H. and Li, W.J. (2012) Development History, Development Strategy and Analysis of Policy Guidance in Green Communication. Mobile Communications, 9, 7-11.

[5]   Chen, A.P. (2012) Current Situation of Development of Energy-Saving and the Solution in Communications Industry. Modern Science & Technology of Telecommunications, 2, 51-54.

[6]   3GPP TS 36.213 (2009) Technical Specification Group Radio Access Network: Physical Layer Procedures (Release 8).

[7]   EARTH_WP4_D4.3 (2012) Final Report on Green Radio Technologies.

[8]   EARTH_WP4_D4.2 2012) Green Radio Technologies.

[9]   Ziaul, H., Hamidreza, B. and Vijay, K. (2011) Green Cellular Networks: A Survey, Some Research Issues and Challenges. IEEE Communications Surveys & Tutorials, 13, 524-540. http://dx.doi.org/10.1109/SURV.2011.092311.00031

[10]   3GPP TS 36.211 (2011) Evolved Universal Terrestrial Radio Access (E-UTRA). Physical Channels and Modulation.

[11]   Samsung (2006) R1-060076: Adaptive Modulation and Channel Coding Rate. 3GPP TSG RAN WG1 LTE ad Hoc, Helsinki. www.3gpp.org

 
 
Top