Back
 JECTC  Vol.5 No.1 , March 2015
Anisotropic Thermal Diffusivity Measurements in High-Thermal-Conductive Carbon-Fiber-Reinforced Plastic Composites
Abstract: This paper presents the temperature dependence of in-plane thermal diffusivity and anisotropy distribution for pitch-based carbon-fiber-reinforced polymers (CFRPs). The measurement was performed using the laser-spot periodic heating method. The samples were unidirectional (UD) and crossply (CP) CFRPs. All carbon fibers of the UD samples ran in one direction, while those of the CP samples ran in two directions. In both UD and CP CFRPs, from -80°C to +80°C, temperature dependence of thermal diffusivity values increased as temperature decreased. In this temperature range, the anisotropic ratio between the fiber direction and its perpendicular direction of the UD CFRP was 106 - 124. During the anisotropy distribution measurement, it was found that thermal anisotropy can be visualized by scanning the laser in a circle on the sample. The thermal diffusivity of the UD CFRP in the fiber direction was 17 times larger than that in the 15° direction, and the thermal diffusivity in the other directions was lower than that in the 15° direction. The anisotropy distribution for the CP CFRP reflected its inhomogeneous structure.
Cite this paper: Kuribara, M. and Nagano, H. (2015) Anisotropic Thermal Diffusivity Measurements in High-Thermal-Conductive Carbon-Fiber-Reinforced Plastic Composites. Journal of Electronics Cooling and Thermal Control, 5, 15-25. doi: 10.4236/jectc.2015.51002.
References

[1]   Ohnishi, A. (2009) Mars-Observation Satellite “NOZOMI” and Asteroid-Observation Satellite “HAYABUSA”. Japan Journal of Thermophysical Properties, 23, 203-211.

[2]   Wrobel, G., Rdzawski, Z., Muzia, G. and Pawlak, S. (2009) Determination of Thermal Diffusivity of Carbon/Epoxy Composites with Different Fiber Content Using Transient Thermography. Journal of Achievements in Materials and Manufacturing Engineering, 37, 518-525.

[3]   Ellis, D.L. and McDanels, D.L. (1991) Thermal Conductivity and Thermal. Expansion of Graphite Fiber/Copper Matrix Composites. NASA Technical Memorandum 105233, NASA, Washington DC.

[4]   Mirmira, S.R., Renzi, D.F. and Fletcher, L.S. (1998) Transverse Thermal Conductivity and Contact Conductance of Fiber Reinforced Composite Materials. Proceedings of the 11th International Heat Transfer Conference, 7, 83-88.

[5]   Yamane, T., Katayama, S., Todoki, M. and Hatta, I. (1996) Thermal Diffusivity Measurement of Single Fibers by an AC Calorimetric Method. Journal of Applied Physics, 80, 4358-4365.
http://dx.doi.org/10.1063/1.363394

[6]   Kalogiannakis, G., Van Hemelrijck, D., Longuemart, S., Ravi, J. and Okasha A. (2006) Thermal Characterization of Anisotropic Media in Photothermal Point, Line, and Grating Configuration. Journal of Applied Physics, 100, Article ID: 063521.
http://dx.doi.org/10.1063/1.2335381

[7]   Carslaw, H.S. and Jaeger, J.C. (1959) Conduction of Heat in Solids. 2nd Edition, Chap.10, Oxford University Press, Oxford, 263.

[8]   Hatta, I., Fujii, K., Sakibara, A., Takahashi, F., Hamada Y. and Kaneda, Y. (1999) Two-Dimensional Effects on Measurement of Thermal Diffusivity by AC Calorimetric Method: I. Conditions for Precise Measurement. Japanese Journal of Applied Physics, 38, 2988-2992.
http://dx.doi.org/10.1143/JJAP.38.2988

[9]   Gu, Y. and Hatta, I. (1991) Effect of Sample Edge in ac Calorimetric Method for Measuring Thermal Diffusivity of Thin Films with High Thermal Diffusivity. Japanese Journal of Applied Physics, 30, 1137-1138.
http://dx.doi.org/10.1143/JJAP.30.1137

[10]   Nagano, H., Kato, H., Ohnishi, A. and Nagasaka, Y. (2001) Measurement of Thermal Diffusivity of Anisotropy Graphite Sheet using AC Calorimetric Method. International Journal of Thermophysics, 22, 301-312.
http://dx.doi.org/10.1023/A:1006780208048

 
 
Top