MSA  Vol.6 No.3 , March 2015
Preparation of Microcapsules Containing Phase Change Material and Silicon Carbide Powder with Interfacial Polycondensation Reaction Method
ABSTRACT
The fundamental experiments were performed to establish the operational conditions required to prepare the microcapsules containing paraffin wax as a phase change material (PCM) and SiC powder with the interfacial polycondensation reaction. It was investigated how SiC powder affected a few characteristics of microcapsules such as the diameters of microcapsules, latent heat storage density, thermal responsibility and supercooling. In the experiment, the concentration of oil soluble surfactant, the revolution speed of impeller for preparing the (O/W) emulsion and the added weight of SiC powder were changed stepwise. The microcapsules containing PCM in which SiC powder was dispersed could be prepared well and characterized. The diameters of microcapsules increased by containing SiC powder and the content of SiC powder could be increased by performing surface modification of SiC powder. Latent heat storage density decreased with the content of SiC powder. Supercooling of PCM and thermal responsibility could be improved to some degree by containing SiC powder.

Cite this paper
Morita, R. , Saito, N. , Taguchi, Y. and Tanaka, M. (2015) Preparation of Microcapsules Containing Phase Change Material and Silicon Carbide Powder with Interfacial Polycondensation Reaction Method. Materials Sciences and Applications, 6, 251-262. doi: 10.4236/msa.2015.63030.
References
[1]   Kondo, T. and Tanaka, M. (1975) Microcapsules (Preparation, Properties, Application). Sankyo Shuppan, Tokyo.

[2]   Kondo, T. (1967) Saishin Maikurokapseruka Gijutsu (Microencapsulation Technique). TES, Tokyo.

[3]   Tanaka, M. (2008) Key Point of Preparation of Nano/Microcapsules. Techno System Publishing Co. Ltd., Tokyo.

[4]   Koishi, M., Eto, K. and Higure, H. (2005) (Preparation + Utilization) Microcapsules. Kogyo Chosakai, Tokyo.

[5]   Yamagishi, Y., Sugeno, T., Takeuchi, H. and Pyatenko, A.T. (1998) Themal Characteristics of Supercooles Phase Change Materials inside Microcapsules. Netsu Bussel, 12, 10-17. http://dx.doi.org/10.2963/jjtp.12.10

[6]   Yamagishi, Y., Sugeno, T., Takeuchi, H. and Pyatenko, A.T. (1998) Forced Convection Heat Transfer with Microencapsulated Phase-Change-Material Slurries. Kagaku Kogaku Ronbunshu, 24, 104-110.
http://dx.doi.org/10.1252/kakoronbunshu.24.104

[7]   Yamagishi, Y., Takeuchi, H. and Pyatenko, A.T. (1999) Pyatenko, Characteristics of Microencapsulated PCM Slurry as a Heat-Transfer Fluid. AIChE Journal, 45, 696-707.
http://dx.doi.org/10.1002/aic.690450405

[8]   Stritih, U. and Novak, P. (1996) Solar Heat Storage Wall for Building Ventilation. Renewable Energy, 8, 268-271.
http://dx.doi.org/10.1016/0960-1481(96)88860-4

[9]   Zhaoa, C.Y. and Zhang, G.H. (2011) Review on Microencapsulated Phase Change Materials (MEPCMs): Fabrication, Characterization and Applications. Renewable and Sustainable Energy Reviews, 15, 3813-3832.
http://dx.doi.org/10.1016/j.rser.2011.07.019

[10]   Yuan, Y., Zhang, N., Tao, W., Cao, X. and He, Y. (2014) Fatty Acids as Phase Change Materials: A Review. Renewa- ble and Sustainable Energy Reviews, 29, 482-498.
http://dx.doi.org/10.1016/j.rser.2013.08.107

[11]   Jamekhorshid, A., Sadrameli, S.M. and Farid, M. (2014) A Review of Microencapsulation Methods of Phase Change Materials (PCMs) as a Thermal Energy Storage (TES) Medium. Renewable and Sustainable Energy Reviews, 31, 531- 542.
http://dx.doi.org/10.1016/j.rser.2013.12.033

[12]   Zhang, X.X., Tao, X., Yick, K.I. and Wang, X.C. (2004) Structure and Thermal Stability of Microencapsulated Phase-Change Materials. Colloid and Polymer Science, 282, 330-336. http://dx.doi.org/10.1007/s00396-003-0925-y

[13]   Tang, X., Li, W., Shi, H., Wang, X., Wang, J. and Zhang, X. (2013) Fabrication, Characterization, and Supercooling Suppression of Nanoencapsulated n-Octadecane with Methyl Methacrylate-Octadecyl Methacrylate Copolymer Shell. Colloid and Polymer Science, 291, 1705-1712. http://dx.doi.org/10.1007/s00396-013-2905-1

[14]   Sánchez, L., Sánchez, P., Carmona, M., Lucas, A. and Rodríguez, J.F. (2008) Influence of Operation Conditions on the Microencapsulation of PCMs by Means of Suspension-Like Polymerization. Colloid and Polymer Science, 286, 1019- 1027.
http://dx.doi.org/10.1007/s00396-008-1864-4

[15]   Su, J., Ren, L. and Wang, L. (2005) Preparation and Mechanical Properties of Thermal Energy Storage Microcapsules. Colloid and Polymer Science, 284, 224-228.
http://dx.doi.org/10.1007/s00396-005-1368-4

[16]   Su, J.F., Wang, S.B., Zhang, Y.Y. and Huang, Z. (2011) Physicochemical Properties and Mechanical Characters of Methanol-Modified Melamine-Formaldehyde (MMF) Shell microPCMs Containing Paraffin. Colloid and Polymer Sci- ence, 289, 111-119.
http://dx.doi.org/10.1007/s00396-010-2328-1

[17]   Cho, J.S., Kwon, A. and Cho, C.G. (2002) Microencapsulation of Octadecane as a Phase-Change Material by Interfacial Polymerization in an Emulsion System. Colloid and Polymer Science, 280, 260-266.
http://dx.doi.org/10.1007/s00396-001-0603-x

[18]   Cheng, F., Wei, Y., Zhang, Y., Wang, F., Shen, T. and Zong, C. (2013) Preparation and Characterization of Phase- Change Material Nanocapsules with Amphiphilic Polyurethane Synthesized by 3-allyloxy-1,2-propanediol. Journal of Applied Polymer Science, 130, 1879-1889. http://dx.doi.org/10.1002/app.39302

[19]   Borreguero, A.M., Rodríguez, J.F., Valverde, J.L., Peijs, T. and Carmona, M. (2013) Characterization of Rigid Polyurethane Foams Containing Microencapsulted Phase Change Materials: Microcapsules Type Effect. Journal of Applied Polymer Science, 128, 582-590.
http://dx.doi.org/10.1002/app.38226

[20]   Cortazar, M.G. and Rodríguez, R. (2013) Thermal Storage Nanocapsules by Miniemulsion Polymerization. Journal of Applied Polymer Science, 127, 5059-5064.
http://dx.doi.org/10.1002/app.38124

[21]   Tanaka, M., Nakata, K. and Oyama, Y. (1970) Coalescence of Dispersed Liquid Droplets in a Batch Type of Stirred Tank Reactor. Kagaku Kogaku, 34, 893-897.
http://dx.doi.org/10.1252/kakoronbunshu1953.34.893

[22]   O’shima, E. and Tanaka, M. (1982) Coalescence and Breakup of Droplets in Suspension Polymerization of Styrene. Kagaku Kogaku Ronbunshu, 8, 86-90.
http://dx.doi.org/10.1252/kakoronbunshu.8.86

[23]   Tanaka, M. (1985) Local Droplet Diameter Variation in a Stirred Tank. Canadian Journal of Chemical Engineering, 63, 723-727.
http://dx.doi.org/10.1002/cjce.5450630504

[24]   Tanaka, M. and O’Shima, E. (1988) Dispersing Behaviour of Droplets in Suspension Polymerization of Styrene in a Loop Reactor. The Canadian Journal of Chemical Engineering, 66, 29-35. http://dx.doi.org/10.1002/cjce.5450660104

[25]   Yuan, H.G., Kalfas, G. and Ray, W.H. (1991) Suspension Polymerization. Journal of Macromolecular Science, Part C, 31, 215-299.
http://dx.doi.org/10.1080/15321799108021924

[26]   Mizuno, K., Taguchi, Y. and Tanaka, M. (2005) The Effect of the Surfactant Adsorption Layer on the Growth Rate of the Polyurethane Capsule Shell. Journal of Chemical Engineering of Japan, 38, 45-48.
http://dx.doi.org/10.1252/jcej.38.45

 
 
Top