JTST  Vol.1 No.1 , May 2015
Evaluation on Heat Transferring Performance of Fabric Heat Sink by Finite Element Modeling
Abstract: Considering current technology limitation in manufacturing present pin fin heat sinks, a new fabric heat sink has been previously designed. However, there is a lack of an understanding of the heat transferring performance of this new kind of heat sink. Nowadays, finite element analysis has been generally developed for determining heat transfer from in-line and staggered pin fin heat sinks used in electronic packaging applications. In this study, this method is used to predict the heat transfer performance of the new heat sink with woven fabric structure, called fabric pin fin heat sink. Effect of the fin length and the material types made of heat sink on the thermal-structure response of the pin fin was investigated under forced convection. The results show that the minimum temperature of heat sink decreases with an increase of pin fin length,but the decreasing amplitude has decreased. Moreover, the heat transfer performance of fabric heat sink made of continuous carbon Fibers/Polymer (PPS) is worse than that of copper and of aluminum.
Cite this paper: Zhang, H. , Hu, J. , Yang, X. and Li, Y. (2015) Evaluation on Heat Transferring Performance of Fabric Heat Sink by Finite Element Modeling. Journal of Textile Science and Technology, 1, 25-32. doi: 10.4236/jtst.2015.11003.

[1]   Kraus, A.D., Aziz, A. and Welty, J. (2002) Extended Surface Heat Transfer. John Wiley & Sons, Hoboken.

[2]   Shabany, Y. (2010) Heat Transfer. CRC Press, Boca Raton.

[3]   Wirtz, R., Sohal, R. and Wang, H. (1997) Thermal Performance of Pin Fin Fan-Sink Assemblies. Journal of Electronic Packaging, 119, 26-31.

[4]   Sparrow, E. and Vemuri, S. (1985) Natural Convection/Radiation Heat Transfer from Highly Populated Pin Fin Arrays. Journal of Heat Transfer, 107, 190-197.

[5]   Kobus, C.J. and Oshio, T. (2005) Development of a Theoretical Model for Predicting the Thermal Performance Characteristics of a Vertical Pin fin Array Heat Sink under Combined Forced and Natural Convection with Impinging Flow. International Journal of Heat and Mass Transfer, 48, 1053-1063.

[6]   Khan, W.A. (2004) Modeling of Fluid Flow and Heat Transfer for Optimization of Pin fin Heat Sinks. Ph.D. Dissertation, Mechanical Engineering, Citeseer.

[7]   Anusha, I.L., et al. (2014) CFD Analysis of Splayed Pin Fin Heat Sink Using Advanced Composite Materials. International Conference on Advances in Mechanical Sciences, 493-495.

[8]   Incropera, F.P. (2011) Introduction to Heat Transfer. John Wiley & Sons, Hoboken.

[9]   Arif, A.F.M., Zubair, S.M. and Pashah, S. (2012) Thermal-Structural Performance of Orthotropic Pin Fin in Electronics Cooling Applications. Journal of Electronic Packaging, 134, Article ID: 041005.