CS  Vol.6 No.3 , March 2015
Single VDVTA-Based Voltage-Mode Biquad Filter
Abstract: In this paper, an application of voltage differencing voltage transconductance amplifier (VDVTA) in the realization of voltage-mode (VM) multi-input single output (MISO) type biquad is presented. The proposed topology uses one VDVTA as an active element, two capacitors and a grounded resistor. The configuration realizes low pass (LP), high pass (HP), band pass (BP) and notch (BR) filters without the requirement of any matching condition. The natural frequency (w0) and bandwidth (BW) are independently controllable. The proposed circuit offers low active and passive sensitivities of w0. The operation of the proposed circuit has been verified through SPICE simulation with TSMC CMOS 0.18 μm process parameters.
Cite this paper: Singh, G. , Prasad, D. and Bhaskar, D. (2015) Single VDVTA-Based Voltage-Mode Biquad Filter. Circuits and Systems, 6, 55-59. doi: 10.4236/cs.2015.63006.

[1]   Hou, C.L., Huang, C.C., Lan, Y.S., Shaw, J.J. and Chang, C.M. (1999) Current-Mode and Voltage-Mode Universal Biquads Using a Single Current-Feedback Amplifier. International Journal of Electronics, 86, 929-932.

[2]   Sharma, R.K. and Senani, R. (2003) Multifunction CM/VM Biquads Realized with a Single CFOA and Grounded Capacitors. AEU: International Journal of Electronics and Communications, 57, 301-308.

[3]   Prasad, D., Bhaskar, D.R. and Srivastava, M. (2013) Universal Voltage-Mode Biquad Filter Using a VDTA. Indian Journal of Pure and Applied Physics, 51, 864-868.

[4]   Prasad, D., Bhaskar, D.R. and Singh, A.K. (2009) Multi-Function Biquad Using Single Current Differencing Transconductance Amplifier. Analog Integrated Circuits and Signal Processing (USA), 61, 309-313.

[5]   Keskin, A.U. (2006) Multi-Function Biquad Using Single CDBA. Electrical Engineering, 88, 353-356.

[6]   Herencsar, N., Koton, J., Vrba, K. and Lattenberg, I. (2010) New Voltage-Mode Universal Filter and Sinusoidal Oscillator Using Only Single DBTA. International Journal of Electronics, 97, 365-369.

[7]   Tangsrirat, W. and Channumsin, O. (2011) Voltage-Mode Multifunctional Biquadratic Filters Using Single DVCC and Minimum Number of Passive Elements. Indian Journal of Pure and Applied Physics, 49, 703-707.

[8]   Kumar, P. and Pal, K. (2008) Universal Biquadratic Filter Using a Single Current Conveyor. Journal of Active and Passive Electronic Devices, 3, 7-16.

[9]   Shah, N.A., Rather, M.F. and Iqbal, S.Z. (2005) A Novel Voltage-Mode Universal Filter Using a Single CFA. Journal of Active and Passive Electronic Devices, 1, 183-188.

[10]   Chen, H.P. (2010) Single CCII-Based Voltage-Mode Universal Filter. Analog Integrated Circuits and Signal Processing (USA), 62, 259-262.

[11]   Chang, C.M. and Chen, H.P. (2005) Single FDCCII-Based Tunable Universal Voltage-Mode Filter. Circuits, Systems and Signal Processing, 24, 221-227.

[12]   Biolek, D., Senani, R., Biolkova, V. and Kolka, Z. (2008) Active Elements for Analog Signal Processing; Classification, Review and New Proposals. Radioengineering, 17, 15-32.

[13]   Shaktour, I.M. (2011) Unconventional Circuit Elements for Ladder Filter Design. Ph.D. Thesis.

[14]   Bhushan, B. and Newcomb, R.W. (1967) Grounding of Capacitors in Integrated Circuits. Electronics Letters, 3, 148-149.

[15]   Yesil, A., Kacar, F. and Kuntman, H. (2011) New Simple CMOS Realization of Voltage Differencing Transconductance Amplifier and Its RF Filter Application. Radioengineering, 20, 632-637.