Back
 JCC  Vol.3 No.3 , March 2015
Design of an 868 MHz Printed S-Shape Monopole Antenna
Abstract: The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz; acceptable in 915 MHz as well. The s-shape is selected due to the need of reducing the overall size of the normal monopole antenna. The printed antenna was designed with an approximate overall size of 39 × 56 mm2 of which the antenna’s upper side is 26 × 39 mm2 while its reference ground board was sized at 39 × 30 mm2. The antenna is fed by a strip line of 3 × 1.5 mm2, in series with a 4.4 pF capacitance and shunt with an 8.7 nH inductance for purpose of antenna’s impedance matching with the input. A couple of existing publications showed that PCB antenna is not a new technology; however not an old technology for telecommunication industry. The raised problem by this work was duly solved with HFSS as a tool; excellent results are presented. After duly matching the antenna’s impedance with 50 Ω microstrip feed-line, solutions for overall performance were analyzed and demonstrated optimal: radiation patterns were proven omnidirectional, antenna gain optimized. The present antenna prototype’s overall dimensions can be readjusted according to any industrial and manufacturing requests.
Cite this paper: Rushingabigwi, G. and Sun, L. (2015) Design of an 868 MHz Printed S-Shape Monopole Antenna. Journal of Computer and Communications, 3, 49-55. doi: 10.4236/jcc.2015.33009.
References

[1]   Qiwu, T. and Erricolo, D. (2007) Comparison between Printed Folded Monopole and Inverted F Antennas for Wireless Portable Devices. Antennas and Propagation Society International Symposium, 4701-4704. http://dx.doi.org/10.1109/APS.2007.4396593

[2]   Mingyang, L. and Liu, M. (2014) Monopole Antenna and Dipole Antenna Design in HFSS Antenna Design. Chapter 3, 2nd Edition, Publishing House of Electronics Industry, Beijing, 22-43.

[3]   Matthew, L. and Iboun, S. (2005) ISM-Band and Short Range Device Antennas. Texas Instruments’ Application Report Swra046a, 1-37. http://wenku.baidu.com/view/71b8d0126edb6f1aff001f8f.html

[4]   Ni, W. and Nakajima, N. (2010) Small Printed Inverted-L Monopole Antenna for Worldwide Interoperability for Microwave Access Wideband Operation. IET Microwaves, Antennas & Propagation, 4, 1714-1719. http://dx.doi.org/10.1049/iet-map.2009.0469

[5]   Chen, H.-D., Chen, J.-S. and Cheng, Y.-T. (2003) Modi?ed In-verted-L Monopole Antenna for 2.4/5 GHz Dual-Band Operations. IEEE Electronics Letters, 39, 1567-1568. http://dx.doi.org/10.1049/el:20031037

[6]   Soras, C., et al. (2002) Analysis and Design of an Inverted-F Antenna Printed on a PCMCIA Card for the 2.4 GHz ISM Band. IEEE Antennas Propagat Mag., 44, 37-44. http://dx.doi.org/10.1109/74.997891

[7]   Riad, K. (2014) Compact Double Meandered Line Inverted-F Antenna for Outdoor Parking Wireless Car Detector. IEEE Asia Pacific Conference on Wireless and Mobile, 30-35. http://dx.doi.org/10.1109/APWiMob.2014.6920279

[8]   Fredrik, K. (2009) 868 MHz, 915 MHz, and 955 MHz Mo-nopole PCB Antenna. Texas Instruments Design Note DN024 Swra227d, 1-15. http://wenku.baidu.com/view/a17c353231126edb6f1a1071.html

[9]   Audun, A. (2009) 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna. Texas Instruments’ Design Note DN008, 1-16. http://www.docin.com/p-672547835.html

[10]   Richard, W. (2013) Monopole PCB Antenna with Single or Dual Band Option. Texas Instruments Design Note DN024, 1-16. http://www.ti.com/lit/an/swra227e/swra227e.pdf

[11]   Richard, W. (2010) Antenna Selection Guide. Texas Instruments’ Application Note AN058, 1-44. http://www.ti.com.cn/cn/lit/an/swra161b/swra161b.pdf

[12]   Marrocco, G. (2008) The Art Of UHF RFID Antenna Design: Impedance Matching and Size Reduction Techniques. IEEE Antennas and Propagation Magazine, 50, 66-79. http://dx.doi.org/10.1109/MAP.2008.4494504

[13]   Zuffanelli, S., et al. (2014) An Impedance Matching Method for Optical Disc-Based UHF-RFID Tags. IEEE International Conference on RFID, 15-22. http://dx.doi.org/10.1109/RFID.2014.681070

 
 
Top