JMMCE  Vol.3 No.2 , March 2015
Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings
ABSTRACT
Carbide precipitates in Thin Wall Ductile Iron (TWDI) used for automotive applications needs to be eliminated or reduced for improved strength, ductility, crack propagation resistance and good machinability. Ductile iron thin section profiles (≤3 mm) present danger of massive carbide precipitations in the as-cast sample. Precipitated carbide phase is brittle and negatively affects the mechanical properties of the iron matrix. The suppression of carbide formation is associated with the nucleating properties of the nodularizer and innoculant alloys. This treatment is vital in ensuring that carbide precipitation, flake graphite structure and non-nodular graphite phases are reduced or completely eliminated in the TWDI castings. Therefore, the temperature and technique of treatment would influence the yield of the process, and ultimately the mechanical properties. In this study, the effect of nodularization and inoculation treatment temperature on the microstructure and mechanical properties of TWDI castings is examined. The results indicate that good nodularity and nodule count with better percent elongations are achieved using low treatment temperatures in descending order of 1490°C, 1470°C and 1450°C, but have negative effect at lower treatment temperature of 1430°C. However, TWDI castings have superior properties in terms of nodule counts and nodularity at 1450°C. Treatment temperature does not produce significant influence on ultimate tensile strength (UTS) and hardness of TWDI castings. TWDI castings show poor nodularity, nodule count and ductility at higher inoculation treatment temperatures of 1550°C, 1530°C and 1510°C.

Cite this paper
Ochulor, E. , Adeosun, S. , Amuda, M. and Balogun, S. (2015) Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings. Journal of Minerals and Materials Characterization and Engineering, 3, 94-105. doi: 10.4236/jmmce.2015.32012.
References
[1]   Skaland, T. (2003) A New Method for Chill and Shrinkage Control in Ladle Treated Ductile Iron. Keith Millis Symposium on Ductile Cast Iron.

[2]   Fras, E. and Gorny, M. (2006) Structure of Thin Wall Austempered Ductile Iron (TWADI). Proceedings of the 8th International Symposium on Science and Processing of Cast Iron, Beijing, 16-19 October 2006, 157.

[3]   Borrajo, J.M., Martinez, R.A., Boeri, R.E. and Sikora, J.A. (2002) Shape and Count of Free Graphite Particles in Thin Wall Ductile Iron Castings. ISIJ International, 42, 257-263.
http://dx.doi.org/10.2355/isijinternational.42.257

[4]   Ashraf Sheikh, P.M. (2008) Production of Carbide-Free Thin Ductile Iron Castings. Journal of University of Science and Technology Beijing.

[5]   Skaland, T., Grong, O. and Grong, I. (1993) A Model for Graphite Formation in Ductile Iron Inoculation Mechanisms. Metallurgical and Materials Transaction, 24A, 2321-2345.

[6]   Flemings, M.C. (1974) Solidification Processing. McGraw-Hill Book Company, New York, 423.

[7]   Bockus, S., Venckunas, A. and Zaldarys, G. (2008) Relation between Section Thickness, Microstructure and Mechanical Properties of Ductile Iron Castings. Materials Science, 14.

[8]   Stefanescu, D.M., Ruxanda, R. and Dix, L.P. (2003) The Metallurgy and Tensile Mechanical Properties of Thin Wall Spheroidal Graphite Iron. International Journal of cast Metals Research, 16, 319-324.

[9]   Bockus, S. and Zalgarys, G. (2009) Influence of the Section Size and Holding time on the Graphite Parameters of Ductile Iron Production. Metallurgija, 48, 19-22.

[10]   Bockus, S. and Dobrovolskis, A. (2004) Peculiarity of Producing Ferritic Ductile Iron Castings. Materials Science, 10.

[11]   Olsen, S.O. (2009) Inoculation of Grey and Ductile Iron, a Comparison of Nucleation Sites and Some Practical Advis es. AFS Transaction. Technical Report (Online).
http://www.foundry.elkem.com/dav/cfblea46e2.pdf

[12]   Mullins, J.D. (2006) The Most Important Part of Ductile Iron Production—Inoculation. Sorelmetal Technical Services.

[13]   Imasogie, B.I., Afonja, A.A. and Ali, J.A. (2000) Properties of Ductile Iron Nodularised with Multiple Calcium Magnesium Based Master Alloy. Materials Science and Technology, 16, 194-201.
http://dx.doi.org/10.1179/026708300101507541

[14]   Hsu, C-H., Chen, M-L. and Hu, C-J. (2007) Microstructure and Mechanical Properties of 4% Cobalt and Nickel Alloyed Ductile Iron. Materials Science and Engineering: A, 444, 339-346.
http://dx.doi.org/10.1016/j.msea.2006.09.027

[15]   Choi, J.H., Oh, J.K., Choi, C.O., Kim, J.K. and Rohatgi, P.K. (2004) Effect of Rare Earth Elements on Microstructure Formation and Mechanical Properties of Thin Wall Ductile Iron Castings. Journal of Material Science and Engineering: A, 383, 323-333.
http://dx.doi.org/10.1016/j.msea.2004.04.060

[16]   Ashraf Skeikh, M. and Iqbal, J. (2007) Effect of Lanthanum on Nodule Count and Nodularity of Ductile Iron. Journal of Rare Earths, 25, 533-536.
http://dx.doi.org/10.1016/S1002-0721(07)60557-2

[17]   Olsen, S.O. and Hartung, C. (2006) Recovery of Magnesium in a Ductile Iron Process. Elkem Foundry Products, New Presentation Folder, Kristiansand.

[18]   Gagne, M. (2006) Thin Wall Ductile Iron Castings: A Reality for Light Weight Automotive Parts.
Sorelmetal Technical Services.

 
 
Top