MSA  Vol.6 No.3 , March 2015
The Role of Silver Additions in Formation of Sn-Bi-Ag Semiconductor Alloys by Rapid Solidification
Author(s) Tarek El Ashram1,2
ABSTRACT
Five alloys Sn-5Bi-xAg (x = 0, 1, 2, 3, and 4 in at %) are produced by rapid solidification using melt-spinning technique. From temperature dependence of electrical resistivity (TDR), it is found that the Sn-5Bi-xAg (x = 1, 2, 3, 4 in at %) rapidly solidified by melt spinning technique are narrow band semiconductor alloys. The energy gap Eg decreases by increasing Ag concentration from 203 meV for Sn-5Bi-1Ag to 97.5 meV for Sn-5Bi-4Ag alloy. From x-ray diffraction analysis (XRD), it is found that the Hume-Rothery condition for phase stability is not satisfied for this alloy.

Cite this paper
Ashram, T. (2015) The Role of Silver Additions in Formation of Sn-Bi-Ag Semiconductor Alloys by Rapid Solidification. Materials Sciences and Applications, 6, 228-233. doi: 10.4236/msa.2015.63027.
References
[1]   Horio, Y., Yamashita, H. and Hayashi, T. (2004) Microstructure and Thermoelectric Properties of Hot-Pressed p-Type Bi0.5Sb1.5Te3 Alloys Prepared by Rapid Solidification Technique. Materials Transactions, 45, 3309-3313.
http://dx.doi.org/10.2320/matertrans.45.3309

[2]   Raouf A., Kamal M., El Ashram T. and Mosaad S. (2010) Rapidly Solidified Semiconducting Bi-Ag Alloys Produced Using Melt-Spinning Technique. Journal of Ovonic Research, 6, 297-302.

[3]   El-Ashram T., Kamal, M., Raouf, M.A. and Mosaad, S. (2012) Odd Valency Dopants Convert Bismuth into Semicon- ductor. Journal of Ovonic Research, 8, 97-104.

[4]   EL-Ashram T. (2015) Formation of Supersaturated Solid Solutions Bi-Ag and Bi-Zn by Rapid Solidification Using Melt Spinning Technique. Materials Sciences and Applications, 6, 183-188. http://dx.doi.org/10.4236/msa.2015.62021

[5]   Dutta, S., Shubha, V., Ramesh, T.G. and D’Sa, F. (2009) Thermal and Electronic Properties of Bi1-xSbx Alloys. Jour- nal of Alloys and Compounds, 467, 305-309.
http://dx.doi.org/10.1016/j.jallcom.2007.11.146

[6]   Lenoira, B., Dauscher, A., Cassartb, M., Ravichc, Y.I. and Scherrer, H. (1998) Effect of Antimony Content on the Thermoelectric Figure of Merit of Bi1-xSbx Alloys. Journal of Physics and Chemistry of Solids, 59, 129-134.
http://dx.doi.org/10.1016/S0022-3697(97)00187-X

[7]   Lenoira, B., Cassartb, M., Michenaud, J.P., Scherrer, H. and Scherrer, S. (1996) Transport Properties of Bi-rich Bi-Sb Alloys. Journal of Physics and Chemistry of Solids, 57, 89-99.
http://dx.doi.org/10.1016/0022-3697(95)00148-4

[8]   Kamal, M. and El-Ashram, T. (2008) Zero and Negative Temperature Coefficients of Resistivity of Rapidly Solidified Bi-Sn Alloys Using Melt-Spinning Technique. Journal of Materials Science: Materials in Electronics, 19, 91-96.
http://dx.doi.org/10.1007/s10854-007-9315-4

[9]   El-Ashram T. (2006) The Structure and Properties of Rapidly Solidified Pure Tin. Radiation Effects and Defects in Solids, 161, 193-197.

[10]   El-Ashram T. (2005) The Relation between Valency, Axial Ratio, Young’s Modulus and Resistivity of Rapidly Solidi- fied Tin-Based Eutectic Alloys. Journal of Materials Science: Materials in Electronics, 16, 501-505.
http://dx.doi.org/10.1007/s10854-005-2724-3

 
 
Top