JEAS  Vol.5 No.1 , March 2015
Modeling the Rheological Characteristics of Flexible High-Yield Pulp-Fibre-Reinforced Bio-Based Nylon 11 Bio-Composite
Abstract: The aim of this work was to develop a mathematical model to investigate the rheological characteristics of viscoelastic pulp-fibre composite materials. The rheological properties of High-Yield Pulp (HYP) reinforced bio-based Nylon 11 (Polyamide 11) (PA11) composite (HYP/PA11) were investigated using a capillary rheometer. Novel predicted multiphase rheological-model-based polymer, fibre, and interphasial phases were developed. Rheological characteristics of the compo-site components influence the development of resultant microstructures; this in turn affects mechanical characteristics of a multiphase composite. The main rheological characteristics of polymer materials are viscosity and shear rate. Experimental and theoretical test results of HYP/PA11 show a steep decrease in apparent viscosity with increasing shear rate, and this melt-flow characteristic corresponds to shear-thinning behavior in HYP/PA11. The non-linear mathematical model to predict the rheological behavior of HYP/PA11 was validated experimentally at 200°C and 5000 S-1 shear rate. Finally, predicted and experimental viscosity results were compared and found to be in a strong agreement.
Cite this paper: Cherizol, R. , Sain, M. and Tjong, J. (2015) Modeling the Rheological Characteristics of Flexible High-Yield Pulp-Fibre-Reinforced Bio-Based Nylon 11 Bio-Composite. Journal of Encapsulation and Adsorption Sciences, 5, 1-10. doi: 10.4236/jeas.2015.51001.

[1]   Pervaiz, M. and Sain, M. (2003) Carbon Storage Potential In natural Fibre Composites. Resources, Conservation and Recycling, 39, 325-340.

[2]   Bourmaud, A. and Baley, C. (2009) Rigidity Analysis of Polypropylene/Vegetal Fibre Composites after Recycling. Polymer Degradation and Stability, 39, 297-305.

[3]   George, J., Sreekala, M.S. and Thomas, S. (2001) A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites. Polymer Engineering Science, 41, 1471-1485.

[4]   Gu, R. and Kokta, B. (2010) Mechanical Properties of PP Composites Reinforced with BCTMP Aspen Fiber. Journal of Thermoplastic Composite Materials, 23, 513-542.

[5]   Bajpai, P. (2012) Brief Description of the Pulp and Paper Making Process. Biotechnology for Pulp and Paper Processing, 7-14.

[6]   Thomen, H. (2001) Modeling the Physical Processes in Natural Fiber Composites during Batch and Continuous Pressing. Oregon State University, Corvallis.

[7]   Plackett, D., Torgilsson, R. and Andersen, T. (2010) Influence of Fiber Type, Fiber Mat Orientation, and Process Time on the Properties of a Wood Fiber/Polymer Composite. International Journal of Polymeric Materials, 51, 1005-1018.

[8]   Uhlherr, P.H.T., Guo, J., Zhang, X.M., Zhou, J.Z.Q. and Tiu, C. (2005) The Shear-Induced Solid-Liquid Transition in Yield Stress Materials with Chemically Different Structures. Journal of Non-Newtonian Fluid Mechanics, 125, 101- 119.

[9]   Liu, Y.J., Xu, N. and Luo, J.F. (2000) Modeling of Interphases in Fiber-Reinforced Composites under Transverse Loading Using Boundary Element Method. Journal of Applied Mechanics, 67, 41.

[10]   Kaw, A. and Besterfield, G. (1998) Effect of Interphase on Mechanical Behavior of Composites. Journal of Engineering Mechanics, 117, 2641-2658.

[11]   Yeh, J.R. (1992) The Effect of Interface on the Transverse Properties of Composites. International Journal of Solids and Structures, 29, 2493-2502.

[12]   Gohil, P. and Shaikh, A. (2010) Analytical Investigation and Comparative Assessment of Interphase Influence on Elastic Behavior of Fiber Reinforced Composites. Journal of Reinforced Plastics and Composites, 29, 685-699.

[13]   Kari, S., Berger, H., Rodriguez, R.R. and Gabbert, U. (2005) Computational Evaluation of Effective Material Properties of Composites Reinforced by Randomly Distributed Spherical Particles. Composite Structures, 71, 397-400.

[14]   Lamnawar, K. and Maazouz, A. (2008) Rheology at the Interface and the Role of the Interphase in Reactive Functionalized Multilayer Polymers in Coextrusion Process. American Institute of Physics, 978, 7354-0549.

[15]   Larache, M., Agbossou, A., Pastor, J. and Muller, D. (1994) Role of Interphase on the Elastic Behavior of Composite Materials: Theoretical and Experimental Analysis. Journal of Composite Materials, 28, 1141-1157.

[16]   Deshpande, K. (2004) k-Version of Finite Element Method for Polymer Flows using Giesekus Constitutive Model. Ph.D. Thesis, University of Kansas, Lawrence.

[17]   Hosseinalipour, S., Tohidi, A. and Shokrpour, M. (2012) A Review of Dough Rheological Models Used in Numerical Applications. Journal of Computational and Applied Research in Mechanical Engineering, 1, 129-147.

[18]   Giesekus, H. (1982) A Simple Constitutive Equation for Polymer Fluids Based on the Concept of Deformation-Dependent Tensorial Mobility. Journal of Non-Newtonian Fluid Mechanics, 11, 69-109.