JSEMAT  Vol.5 No.2 , April 2015
Corrosion of Nanocrystalline Ni-W Coated Copper
Abstract: The present study is dealing with the corrosion of copper coated with nanocrystalline nickeltungsten coating. Different plating bath compositions and conditions were used in order to produce nickel-tungsten coatings of different tungsten content 30%, 40% and 50% wt, with a thickness of 20 μm. The corrosion resistance of nickel-tungsten alloy coated copper was examined by a potentiodynamic polarisation technique in NaCl solution (0.03 M, 0.3 M and 1 M) as a function of pH (3, 7, 10) and temperature (7°C, 30°C, 40°C) of the solution. It has been found that the pH value did not seem to affect the corrosion behaviour of the coated specimen remarkably, while the increase of solution temperature increased the corrosion rate of the coated copper specimen. It was finally confirmed that the corrosion products mainly consisted of tungsten and nickel oxides.
Cite this paper: Panagopoulos, C. , Plainakis, G. and Tsoutsouva, M. (2015) Corrosion of Nanocrystalline Ni-W Coated Copper. Journal of Surface Engineered Materials and Advanced Technology, 5, 65-72. doi: 10.4236/jsemat.2015.52007.

[1]   Schuh, C.A., Nieh, T.G. and Iwasaki, H. (2003) The Effect of Solid Solution W Additions on the Mechanical Properties of Nanocrystalline Ni. Acta Materialia, 51, 431-443.

[2]   Palaniappa, M. and Seshadri, S.K. (2008) Friction and Wear Behavior of Electroless Ni-P and Ni-W-P Alloy Coatings. Wear, 265, 735-740.

[3]   Krishnan, R.M., Joseph Kennedy, C., Jayakrishnan, S., Sriveeraraghavan, S., Natarajan, S.R. and Venkatakrishnan, P.G. (1955) Electrodeposition of Nickel-Tungsten Alloys. Metal Finishing, 93, 33-39.

[4]   Haj-Taieb, M., Haseeb, A.S.M.A., Caulfield, J., Bade, K., Aktaa, J. and Hemker, K.J. (2008) Thermal Stability of Elec- trodeposited LIGA Ni-W Alloys for High Temperature MEMS Applications. Microsystem Technologies, 14, 1531- 1536.

[5]   Sriraman, K.R., Raman, S.G.S. and Seshadri, S.K. (2007) Corrosion Behaviour of Electrodeposited Nanocrystalline Ni-W and Ni-Fe-W Alloys. Materials Science and Engineering: A, 460-461, 39-45.

[6]   Alimadadi, H., Ahmadi, M., Aliofkhazraei, M. and Younesi, S.R. (2009) Corrosion Properties of Electrodeposited Nanocrystalline and Amorphous Patterned Ni-W Alloy. Materials & Design, 30, 1356-1361.

[7]   Panagopoulos, C.N., Plainakis, G.D. and Lagaris, D.A. (2011) Nanocrystalline Ni-W Coatings on Copper. Materials Science and Engineering: B, 176, 477-479.

[8]   Hansen, M. (1958) Constitution of Binary Alloys. Mc Graw-Hill, New York, 1058.

[9]   Panagopoulos, C.N. and Michaelidis, A. (1992) Laser Surface Treatment of Copper. Journal of Materials Science, 27, 1280-1284.

[10]   Panagopoulos, C.N., Christou, G. and Danvelio, G. (1993) Laser Treatment of Zinc Coated Aluminium. Transactions of the Institute of Metal Finishing, 71, 65-67.

[11]   Krolikowski, A., Plonska, E., Ostrowski, A., Donten, M. and Stojek, Z. (2009) Effects of Compositional and Structural Features on Corrosion Behavior of Nickel-Tungsten Alloys. Journal of Solid State Electrochemistry, 13, 263-275.

[12]   Xu, B., Dong, L., Fan, Y. and Chen, Y. (2000) A Study on the Dispersion of NiO and/or WO3 on Anatase. Journal of Catalysis, 193, 88-95.

[13]   Ramani, N.C., Sullivan, D.L., Ekerdt, J.G., Jehng, J.M. and Wachs, I.E. (1998) Selective Oxidation of 1-Butene over Silica-Supported Cr(VI), Mo(VI), and W(VI) Oxides. Journal of Catalysis, 176, 143-154.

[14]   Ravi Shankar, A., Mathiya, S., Thyagarajan, K. and Kamachi Mudali, U. (2010) Corrosion and Microstructure Correlation in Molten LiCl-KCl Medium. Metallurgical and Materials Transactions A, 41, 1815-1825.