MR  Vol.3 No.1 , January 2015
Atomic Force Microscopy Studies on GaAs/In Bilayers Deposited on Si (100)
ABSTRACT
GaAs/In bilayers were prepared by RF Magnetron Sputtering in an Ar atmosphere on Si (100) substrates using high purity (95.95%) GaAs (100) and In targets. The growth temperatures were 300oC and 580oC for the high purity targets of In and GaAs, respectively. Three samples were prepared: the deposition time (td) for the GaAs layers was fixed to 30 minutes, while varied for the In layers from td = 10, 15, and 20 minutes. The morphological and optical studies of the samples were made by means of Amplitude Modulation Atomic Force Microscopy (AM-AFM). In order to analyze and correlate surface morphology and alloy composition properties, the as-prepared samples were cleaved along the [001] direction and subsequently studied by AM-AFM-micrographs. From topographic images, a statistical study of the roughness and grain size was made. Additionally, cross sectional AM-AFM-micrographs were performed for each sample, where the phase channel, which is sensitive to the material properties of the specimen, was of particular interest.

Cite this paper
Venegas, M. , Correa, R. , López, M. and Mora, Á. (2015) Atomic Force Microscopy Studies on GaAs/In Bilayers Deposited on Si (100). Microscopy Research, 3, 6-16. doi: 10.4236/mr.2015.31002.
References
[1]   Borri, P., Schneider, S., Langbein, W. and Bimberg, D. (2006) Ultrafast Carrier Dynamics in InGaAs Quantum Dot Materials and Devices. Journal of Optics A: Pure and Applied Optics, 84, S33-S46.

[2]   Zilkie, A.J., Meier, J., Mojahedi, M., Poole, P.J., et al. (2007) Carrier Dynamics of Quantum-Dot, Quantum-Dash, and Quantum-Well Semiconductor Optical Amplifiers Operating at 1.55 mm. IEEE Journal of Quantum Electronics, 4311, 1873-1880.

[3]   Franta, D., Ohlídal, I., Klapetek, P., Montaigne-Ramil, A., Bonanni, A., et al. (2002) Influence of Overlayers on Deter- mination of the Optical Constants of Zn Sethin Films. Journal of Applied Physics, 92, 1873-1880. http://dx.doi.org/10.1063/1.1489068

[4]   Klapetek, P., Ohlídal, I., Franta, D., Montaigne-Ramil, A., Bonanni, A., et al. (2003) Atomic Force Microscopy Characterization of ZnTe Epitaxial Films. Acta Physical Slovaca, 53, 223-230.

[5]   Jenkins, C., Westwood, D.I., Elliott, M., Macdonald, J.E., Meaton, C., et al. (2001) Metrology of Semiconductor Device Structures by Cross-Sectional AFM. Materials Science and Engineering, 80, 138-141.

[6]   Fasching, G., Schrey, F.F., Roch, T., Andrews, A.M., Brezna, W., et al. (2006) Single InAs/GaAs Quantum Dots: Pho- tocurrent and Cross-Sectional AFM Analysis. Physica E: Low-Dimensional Systems and Nanostructures, 32, 183-186.
http://dx.doi.org/10.1016/j.physe.2005.12.034

[7]   Noy, A., Sanders, C.H., Vezenov, D.V., Wong, S.S. and Lieber, C.M. (1998) Chemically-Sensitive Imaging in Tapping Mode by Chemical Force Microscopy: Relationship between Phase Lag and Adhesion. Langmuir, 14, 1508-1511.

[8]   García, R., Tamayo, J., Calleja, M. and García, F. (1998) Phase Contrast in Tapping-Mode Scanning Force Microscopy. Applied Physics A, 66, S309-S312.

[9]   Xu, W., Wood-Adams, P.M. and Robertson, C.G. (2006) Measuring Local Viscoelastic Properties of Complex Materials with Tapping Mode Atomic Force Microscopy. Polymer, 47, 4798-4810. http://dx.doi.org/10.1016/j.polymer.2006.04.032

[10]   Magonov, S.N., Elings, V. and Whangbo, M.H. (1997) Phase Imaging and Stiffness in Tapping-Mode Atomic Force Microscopy. Surface Science, 375, L385-L391.

[11]   http://gwyddion.net/

[12]   Horcas, I., Fernandez, R., Gomez-Rodriguez, J.M., Colchero, J., Gomez-Herrero, J., et al. (2007) WSXM: A Software for Scanning Probe Microscopy and a Tool for Nanotechnology. Review of Scientific Instruments, 78, Article ID: 013705.

[13]   http://nanoscaleworld.bruker-axs.com/nanoscaleworld/media/p/2740.aspx

 
 
Top