Back
 ENG  Vol.3 No.6 , June 2011
A Comparative Study on Several Anti-Corrosion Materials for Power FGD System
Abstract: In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-rization (FGD). The relationship between curing conversion rate of hybrid polymer and temperature was investigated by differential scanning calorimeter (DSC). The adhesion strength, coefficient of thermal expansion and flame retardant properties of three anti-corrosion materials were measured and analyzed. A corrosion test in 8% H2SO4 and 5% HCl at temperature cycle of 40°C~ 160°C was applied to study corrosion resistance of several anti-corrosion materials. Gravimetric measurement and morphological observation of three materials before and after corrosion test were comparatively analyzed in the paper. The small weight change and good morphological structure of hybrid composite during corrosion test demonstrate that hybrid composite has better anti-corrosion properties than epoxy modified silicone coating and vinyl ester flake mastic.
Cite this paper: nullZ. Wang, D. Mei, W. Zhang, E. Han and Y. Wang, "A Comparative Study on Several Anti-Corrosion Materials for Power FGD System," Engineering, Vol. 3 No. 6, 2011, pp. 653-658. doi: 10.4236/eng.2011.36078.
References

[1]   H. Wang and Y. R. Lv, “The Anticorrosion Measures of Flue Gas Desulfurization System in Power Station by Lime-stone-Gypsum Wet Method,” Information Development & Economy, Vol. 21, No. 2, 2007, pp. 1-4.

[2]   C. Ing and L. Dahl, “Corrosion in Flue Gas Desulfurization Plants and Other Low Temperature Equipment,” Materials and Corrosion, Vol. 43, No. 6, 1992, pp. 298- 304. doi:10.1002/maco.19920430610

[3]   G.-G. Yi and Z.-G. Yang, “Corrosion Evaluation of One Dry Desulfurization Equip-ment–Circulating Fluidized Bed Boiler,” Materials & Design, Vol. 32, No. 2, 2011, pp. 671-681.

[4]   Z. Y. Wang, “The National Conference on Anti-Corro- sion Technologies for Chimney of Power FGD System,” Power Corrosion Confer-ence, Shanghai, August 2009, pp. 1-12.

[5]   D.-I. W. Goy and I. M. Kaempffer, “Lining Installation and Performance in FGD Systems,” Materials and Corrosion, Vol. 43, No. 6, 2004, pp. 270-274.

[6]   Don Kelley, “The Use of FRP in FGD Applica-tions,” Reinforced Plastics, Vol. 51, No. 1, 2007, pp. 14-19. doi:10.1016/S0034-3617(07)70026-7

[7]   Z. Y. Wang, E. H. Han and W. Ke, “Effect of Acrylic Polymer and Nanocompo-site with Nano-Sio2 on Thermal Degradation and Fire Resis-tance of APP–DPER–MEL Coating,” Polymer Degradation and Stability, Vol. 91, No.9, 2006, pp.1937-1947. doi:10.1016/j.polymdegradstab.2006.03.001

[8]   C. S. Tyberg and K. Bears, “Structure–Property Relationships of Void-Free Phenolic–Epoxy Matrix Materials,” Polymer, Vol. 41, No. 13, 2000, pp. 5053-5062. doi:10.1016/S0032-3861(99)00574-1

[9]   T. Kreft and W. F. Reed, “Predictive Control and Verification of Conversion Ki-netics and Polymer Molecular Weight in Semi-Batch Free Radical Homopolymer Reactions,” European Polymer Journal, Vol. 45, No. 9, 2009, pp. 2288- 2303. doi:10.1016/j.eurpolymj.2009.05.006

[10]   G. Marosia, A. Mártona and A. Szépa, “Fire Retardancy Effect of Migration in Polypropylene Nanocomposites Induced by Modified Inter-layer,” Polymer Degradation and Stability, Vol. 82, No. 2, 2003, pp. 379-385. doi:10.1016/S0141-3910(03)00223-4

[11]   V. B. Mi?k-ovi?-Stankovi?, D. M. Dra?i? and Z. Ka?arevi?-Popovi?, “The Sorption Characteristics of Epoxy Coatings Electrodeposited on Steel during Exposure to Different Corrosive Agents,” Cor-rosion Science, Vol. 38, No. 9, 1996, pp. 1513-1523. doi:10.1016/0010-938X(96)00042-X

[12]   Z. Y. Wang, E. H. Han and F. C. Liu, “The Effect of Different Curing Agents on Cure Reaction and Exposure Resistance of Phenolic-Epoxy Resins in Hot Acid Solutions,” Corrosion, Vol. 66, No. 7, 2010, pp. 1-9. doi:10.5006/1.3462907

[13]   V. H. V. Sarmento, M. G. Schia-vetto and P. Hammer, “Corrosion Protection of Stainless Steel by Polysiloxane Hybrid Coatings Prepared Using the Sol–Gel Process,” Surface and Coatings Technology, Vol. 204, No. 16-17, 2010, pp. 2689-2701. doi:10.1016/j.surfcoat.2010.02.022

 
 
Top