ENG  Vol.3 No.6 , June 2011
The Effects of Dimension Ratio and Horizon Length in the Micropolar Peridynamic Model
Abstract: The aim of this study is to investigate the effects of horizon selection on the elastic behaviour of plate type structures in the micropolar peridynamic theory. Plates with various lengths and widths have been investi-gated using micropolar peridynamic model for different horizon selections. The mathematical model of plates has been provided applying the micropolar peridynamic theory and solution of this model has been obtained by finite element methods. The displacement fields have been computed for the different horizons and dimension ratios of plates. To compute the displacement field a program code has been developed by using the software package MATHEMATICA. The results obtained have been compared with the analytical solution of the classical elasticity theory and with the solution of displacement based finite element methods. For displacement based finite element method solution the software package ANSYS has been used. Ac-cording to results it has been observed that the displacement fields of the plates are strongly affected by ho-rizon selection. Therefore a question raises that which horizon length should be used with the problem in hand or is there any method to find the appropriate/best horizon length.
Cite this paper: nullY. Ferhat and I. Ozkol, "The Effects of Dimension Ratio and Horizon Length in the Micropolar Peridynamic Model," Engineering, Vol. 3 No. 6, 2011, pp. 594-601. doi: 10.4236/eng.2011.36071.

[1]   M. Zimmerman, “A Continuum Theory with Long-Range Forces for Solids,” Ph.D. Thesis, Massachusetts Institute of Technology, Boston, 2005.

[2]   S. A. Silling, “Reformulation of Elasticticity Theory for Discontinuities and Long Range Forces,” Journal of the Mechanics and Physics of Solids, Vol. 48, No. 1, 2000, pp. 175-209. doi:10.1016/S0022-5096(99)00029-0

[3]   S. A. Silling and E. Askari, “A Meshfree Method Based on the Peridynamic Model of Solid Mechanics,” Journal of Computers and Structures, Vol. 83, No. 17-18, June 2005, pp. 1526-1535.

[4]   S. A. Silling and F. Bobaru, “Peridynamic Modeling of Membranes and Fibers,” International Journal of Non- Linear Mechanics, Vol. 40, 2005, pp. 395-409. doi:10.1016/j.ijnonlinmec.2004.08.004

[5]   S. A. Silling, M. Zimmerman and R. Abeyaratne, “Deformation of a Peridy-namic Bar,” Journal of Elasticity, Vol. 73, No. 1-3, 2003, pp. 173-190. doi:10.1023/B:ELAS.0000029931.03844.4f

[6]   S. A. Silling, “Peridynamic Modeling of the Failure of the Heterogeneous Solids,” 2002.

[7]   E. Emmrich and O. Weckner, “Analysis and Numerical Approximation of an Inte-gro Diff. Equ. Modeling Non_Local effects in linear elasticity,” Mathematics and Mechanics of Solids, Vol. 12, No. 4, 2005, pp. 363-384. doi:10.1177/1081286505059748

[8]   A. Chakraborty, “Wave Propagation in Anisotropic Media with Non-Local Elasticity,” International Journal of Solids and Structures, Vol. 44, No. 17, August 2007, pp. 5723- 5741. doi:10.1016/j.ijsolstr.2007.01.024

[9]   S. A. Silling, M. Epton, O. Weckner, C. Xu?and E. Askari, “Peridynamic States and Constitutive Modeling,” Journal of Elasticity, Vol. 88, No. 2, 2007, pp. 151-184. doi:10.1007/s10659-007-9125-1

[10]   R. B. Lehoucq and S. A. Silling, “Force Flux and the Peridynamic Stress Tensor,” Composite Structures, Vol. 56, No. 4, April 2008, pp. 1566-1577.

[11]   T. L. Warren, S. A. Silling, A. Askari, O. Weckner, M. N. Epton and J. Xu, “A Non-Ordinary State-Based Peridynamic Method to Model Solid Material De-formation and Fracture,” International Journal of Solids and Structures, Vol. 46, No. 5, March 2008, pp. 1186-1195. doi:10.1016/j.ijsolstr.2008.10.029

[12]   R. W. Macek and S. A. Silling, “Peridynamics via Finite Element Analysis,” Finite Elements in Analysis and Design, Vol. 43, No. 15, November 2007, pp. 1169-1178. doi:10.1016/j.finel.2007.08.012

[13]   S. A. Silling and R. B. Lehoucq, “Convergence of Peridynamics to Classical Elastic-ity,” Journal of Elasticity, Vol. 93, No. 1, 2007, pp. 13-37.

[14]   M. L. Parks, R. B. Lehoucq, S. J. Plimpton and S. A. Silling, “Implementing Peridynamics within a Molecular Dynamics Code,” Computer Physics Communications, Vol. 179, No. 11, December 2008, pp. 777-783. doi:10.1016/j.cpc.2008.06.011

[15]   B. Kilic, A. Agwai and E. Madenci, “Peridynamic Theory for Progressive Damage Pre-diction in Center-Cracked Composite Laminates,” Composite Structures, Vol. 90, No. 2, September 2009, pp. 141-151. doi:10.1016/j.compstruct.2009.02.015

[16]   B. Kilic and E. Madenci, “Structural Stability and Failure Analysis Using Peridynamic Theory,” International Journal of Non-Linear Mechanics, Vol. 44, No. 8, October 2009, pp. 845-854. doi:10.1016/j.ijnonlinmec.2009.05.007

[17]   W. Gerstle, N. Sau and S. Silling, “Peridynamic Modeling of Concrete Struc-tures,” Nuclear Engineering and Design, Vol. 237, No. 12-13, July 2006, pp. 1250-1258. doi:10.1016/j.nucengdes.2006.10.002

[18]   N. Sau, “Peridy-namic Modeling of Quasibrittle Structures,” PhD Thesis, The University of New Mexico, Albuquerque, 2008.

[19]   A. P. Boresi, R. J. Schmidt and O. M. Sidebottom, “Advanced Me-chanics of Materials,” John Wiley and Sons, 5th Edition, New York, 1993.

[20]   J. R. Barber, “Elasticity,” 2nd Edition, Klu-wer Academic Publishers, New York, 2004, pp. 114-115.