MSCE  Vol.3 No.1 , January 2015
Using SiO2 Nanopowders in Anode Catalyst Layer to Improve the Performance of a Proton Exchange Membrane Fuel Cell at Low Humidity
ABSTRACT

In this study, the transfer method is employed to add hydrophilic SiO2 nanopowders to a Pt/C catalyst ink to form an anode catalyst layer on a proton exchange membrane (PEM). The SiO2-layered membrane electrode assembly improves the performance of the PEM under low- or zero-humidification conditions. When the PEM fuel cell (PEMFC) undergoes electrochemical reaction, the moisture content of the PEM exhibits a substantial influence on the transmission of protons. To ensure the moisture content remains high, an external humidifier is typically employed to humidify the majority of PEMFCs. However, self-humidifying PEMFCs could utilize the water produced by the fuel cell reaction, thereby eliminating the need for an external humidifier. In this study, various SiO2 loadings were added to an anode catalyst layer, and the cell temperature and gas humidification conditions were adjusted to determine the influence of the SiO2 loadings on the fuel cell performance. The results show that adding SiO2 is preferable to not adding SiO2 when the fuel cell temperature is 50°C.


Cite this paper
Lin, C. , Hsu, S. and Ho, W. (2015) Using SiO2 Nanopowders in Anode Catalyst Layer to Improve the Performance of a Proton Exchange Membrane Fuel Cell at Low Humidity. Journal of Materials Science and Chemical Engineering, 3, 72-79. doi: 10.4236/msce.2015.31011.
References
[1]   Steele, B.C.H. and Heinzel, A. (2001) Review Article: Materials for Fuel-Cell Technologies. Nature 414, 345-352. http://dx.doi.org/10.1038/35104620

[2]   Wang, Y., Chen, K.S., Mishler, J., Cho, S.C. and Adroher, X.C. (2011) A Review of Polymer Electrolyte Membrane fuel Cells: Technology, Applications, and Needs on Fundamental Research. Applied Energy, 88, 981-1007. http://dx.doi.org/10.1016/j.apenergy.2010.09.030

[3]   Zawodzinski Jr., T.A., Springer, T.E., Uribe, F. and Gottesfeld, S. (1993) Characterization of Polymer Electrolytes for Fuel Cell Applications. Solid State Ionics 60, 199-211. http://dx.doi.org/10.1016/0167-2738(93)90295-E

[4]   Cappadonia, M., Erning, J.W., Niaki, S.M.S. and Stimming, U. (1995) Conductance of Nafion 117 Membranes as a Function of Temperature and Water Content. Solid State Ionics, 77, 65-69. http://dx.doi.org/10.1016/0167-2738(94)00289-5

[5]   Büchi, F.N. and Srinivasan, S. (1997) Operating Proton Exchange Membrane Fuel Cells without External Humidification of the Reactant Gases Fundamental Aspects. Journal of the Electrochemical Society, 144, 2767-2772. http://dx.doi.org/10.1149/1.1837893

[6]   Qi, Z. and Kaufman, A. (2002) PEM Fuel Cell Stacks Operated under Dry-Reactant Conditions. Journal of Power Sources, 109, 469-476. http://dx.doi.org/10.1016/S0378-7753(02)00111-8

[7]   Watanabe, M., Uchida, H. and Emori, M. (1998) Analyses of Self-Humidification and Suppression of Gas Crossover in Pt-Dispersed Polymer Electrolyte Membranes for Fuel Cells. Journal of the Electrochemical Society, 145, 1137-1141. http://dx.doi.org/10.1149/1.1838429

[8]   Lee, H.K., Kim, J.I., Park, J.H. and Lee, T.H. (2004) A Study on Self-Humidifying PEMFC Using Pt-ZrP-Nafion Composite Membrane. Electrochimica Acta, 50, 761-768. http://dx.doi.org/10.1016/j.electacta.2004.01.123

[9]   Yang, T.H., Yoon, Y.G., Kim, C.S., Kwak, S.H. and Yoon, K.H. (2002) A Novel Preparation Method for a Self- Humidifying Polymer Electrolyte Membrane. Journal of Power Sources, 106, 328-332. http://dx.doi.org/10.1016/S0378-7753(01)01025-4

[10]   Xing, D.M., Yi, B.L., Fu, Y.Z., Liu, F.Q. and Zhang, H.M. (2004) Pt-C/SPEEK/PTFE Self-Humidifying Composite Membrane for Fuel Cells. Electrochemical and Solid-State Letters, 7, A315-A317. http://dx.doi.org/10.1149/1.1792274

[11]   Liu, F., Yi, B., Xin, D., Yu, J., Hou, Z. and Fu, Y. (2003) Development of Novel Self-Humidifying Composite Membranes for Fuel Cells. Journal of Power Sources, 124, 81-89. http://dx.doi.org/10.1016/S0378-7753(03)00616-5

[12]   Adjemian, K.T., Lee, S.J., Srinivasan, S., Benziger, J. and Bocarsly, A.B. (2002) Silicon Oxide Nafion Composite Membranes for Proton-Exchange Membrane Fuel Cell Operation at 80-140°C. Journal of the Electrochemical Society, 149, A256-A261. http://dx.doi.org/10.1149/1.1445431

[13]   Sahu, A.K., Selvarani, G., Pitchumani, S., Sridhar, P. and Shukla, A.K. (2007) A Sol-Gel Modified Alternative Nafion-Silica Composite Membrane for Polymer Electrolyte Fuel Cells. Journal of the Electrochemical Society, 154, B123-B132. http://dx.doi.org/10.1149/1.2401031

[14]   Velan, V.S., Velayutham, G., Hebalkar, N. and Dhathathreyan, K.S. (2011) J. Hydrogen Energy, 36, 14815.

[15]   Wilson, M.S. and Gottesfeld, S. (1992) Thin-Film Catalyst Layers for Polymer Electrolyte Fuel Cell Electrodes. Journal of Applied Electrochemistry, 22, 1-7. http://dx.doi.org/10.1007/BF01093004

[16]   Wilson, M.S., Valerio, J.A. and Gottesfeld, S. (1995) Low Platinum Loading Electrodes for Polymer Electrolyte Fuel Cells Fabricated Using Thermoplastic Ionomers. Electrochimica Acta, 40, 355-363. http://dx.doi.org/10.1016/0013-4686(94)00272-3

 
 
Top