MSA  Vol.6 No.1 , January 2015
Mathematical Modeling and Experimental Validation of Mixed Metal Oxide Thin Film Deposition by Spray Pyrolysis
ABSTRACT
The deposition of metal oxide films using Spray Pyrolysis Technique (SPT) is investigated through mathematical and physical modeling. A comprehensive model is developed in the processes including atomization, spray, evaporation, chemical reaction and deposition. The predicted results including particle size and film thickness are compared with the experimental data obtained in a complementary study. The predicted film thickness is in a good agreement with the measurements when the temperature is high enough for the chemical reaction to proceed. The model also adequately predicts the size distribution when the nanocrystals are well-structured at controlled temperature and concentration.

Cite this paper
Khatami, S. , Ilegbusi, O. and Trakhtenberg, L. (2015) Mathematical Modeling and Experimental Validation of Mixed Metal Oxide Thin Film Deposition by Spray Pyrolysis. Materials Sciences and Applications, 6, 68-77. doi: 10.4236/msa.2015.61009.
References
[1]   Sivalingam, D., Gopalakrishnan, J.B. and Rayappan, J.B.B. (2012) Nanostructured Mixed ZnO and CdO Thin Film for Selective Ethanol Sensing. Materials Letters, 77, 117-120.
http://dx.doi.org/10.1016/j.matlet.2012.03.009

[2]   Ilican, S., Caglar, Y., Caglar, M. and Yakuphanoglu, F. (2006) Electrical Conductivity, Optical and Structural Properties of Indium-Doped ZnO Nanofiber Thin Film Deposited by Spray Pyrolysis Method. Physica E: Low-Dimensional Systems and Nanostructures, 35, 131-138.
http://dx.doi.org/10.1016/j.physe.2006.07.009

[3]   Kalantar-Zadeh, K. and Fry, B. (2007) Nanotechnology-Enabled Sensors. Springer, New York.

[4]   Kumar, P. (2013) Magnetism and Magnetotransport in Half and over Doped Manganites Impact of Substrate Induced Strain and Polycrystalline Disorder. Ph.D. Thesis, Jaypee Institute of Information Technology, Noida.

[5]   Perednis, D. and Gauckler, L.J. (2005) Thin Film Deposition Using Spray Pyrolysis. Journal of Electroceramics, 14, 103-111.
http://dx.doi.org/10.1007/s10832-005-0870-x

[6]   Nakaruk, A.S.C.C. and Sorrell, C.C. (2010) Conceptual Model for Spray Pyrolysis Mechanism: Fabrication and Annealing of Titania Thin Films. Journal of Coatings Technology and Research, 7, 665-676.
http://dx.doi.org/10.1007/s11998-010-9245-6

[7]   Jayanthi, G.V., Zhang, S.C. and Messing, G.L. (1993) Modeling of Solid Particle Formation during Solution Aerosol Thermolysis: The Evaporation Stage. Aerosol Science and Technology, 19, 478-490.
http://dx.doi.org/10.1080/02786829308959653

[8]   Yu, H.F. and Liao, W.H. (1998) Evaporation of Solution Droplets in Spray Pyrolysis. International Journal of Heat and Mass Transfer, 41, 993-1001.
http://dx.doi.org/10.1016/S0017-9310(97)00226-3

[9]   Eslamian, M., Ahmed, M. and Ashgriz, N. (2006) Modelling of Nanoparticle Formation during Spray Pyrolysis. Nanotechnology, 17, 1674.
http://dx.doi.org/10.1088/0957-4484/17/6/023

[10]   Reuge, N. and Caussat, B. (2007) A Dimensionless Study of the Evaporation and Drying Stages in Spray Pyrolysis. Computers & Chemical Engineering, 31, 1088-1099.
http://dx.doi.org/10.1016/j.compchemeng.2006.09.011

[11]   Huang, L., Kumar, K. and Mujumdar, A.S. (2004) Simulation of a Spray Dryer Fitted with a Rotary Disk Atomizer Using a Three-Dimensional Computational Fluid Dynamic Model. Drying Technology, 22, 1489-1515.
http://dx.doi.org/10.1081/DRT-120038737

[12]   Jiang, X., Ward, T.L., Swol, F.V. and Brinker, C.J. (2010) Numerical Simulation of Ethanol-Water-NaCl Droplet Evaporation. Industrial & Engineering Chemistry Research, 49, 5631-5643.
http://dx.doi.org/10.1021/ie902042z

[13]   Khatami, S.M.N., Ilegbusi, O.J. and Trakhtenberg, L. (2013) Modeling of Aerosol Spray Characteristics for Synthesis of Sensor Thin Film from Solution. Applied Mathematical Modeling, 37, 6389-6399.
http://dx.doi.org/10.1016/j.apm.2013.01.009

[14]   Khatami, S.M.N. and Ilegbusi, O.J. (2012) Droplet Evaporation and Chemical Reaction in a Single Multi-Component Droplet to Synthesis Mixed-Oxide Film Using Spray Pyrolysis Method. Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition, Houston, 9-15 November 2012, 633-638.

[15]   Widiyastuti, W., Wang, W.N., Lenggoro, I.W., Iskandar, F. and Okuyama, K. (2007) Simulation and Experimental Study of Spray Pyrolysis of Polydispersed Droplets. Journal of Materials Research, 22, 1888-1898.
http://dx.doi.org/10.1557/jmr.2007.0235

[16]   Filipovic, L., Selberherr, S., Mutinati, G.C., Brunet, E., Steinhauer, S., Köck, A. and Schrank, F. (2013) Modeling Spray Pyrolysis Deposition. Proceedings of the World Congress on Engineering, 2, 987-992.

[17]   Blaker, K.A., Halani, A.T., Vijayakumar, P.S., Wieting, R.D. and Wong, B. (1988) Chemical Vapor Deposition of Zinc Oxide Films and Products. US Patent No. 4751149.

[18]   Barnes, T.M., Leaf, J., Fry, C. and Wolden, C.A. (2005) Room Temperature Chemical Vapor Deposition of c-Axis ZnO. Journal of Crystal Growth, 274, 412-417.
http://dx.doi.org/10.1016/j.jcrysgro.2004.10.015

[19]   Khatami, S.M.N., Kuruppumullage, D.N. and Ilegbusi, O.J. (2013) Characterization of Metal Oxide Sensor Thin Films Deposited by Spray Pyrolysis. Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, 15-21 November, Article ID: V010T11A044.

[20]   Khatami, S.M.N. and Ilegbusi, O.J. 2011) Modeling of Aerosol Spray Characteristics for Synthesis of Mixed-Oxide Nanocomposite Sensor Film. Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, 11-17 November 2011, 581-589.

[21]   Shinde, P.S. (2012) Photoelectrochemical Detoxification of Water Using Spray Deposited Oxide Semiconductor Thin Films. Ph.D. Thesis, Shivaji University, Kolhapur.

[22]   Kowarik, S., Hinderhofer, A., Gerlach, A. and Schreiber, F. (2011) Modeling Thin Film Deposition Processes Based on Real-Time Observation. In: Cao, Z., Ed., Thin Film Growth, Woodhead Publishing, Oxford, Cambridge.

[23]   Gupta, S.P. (1985) Measures of Dispersion, Statistical Methods. Sultan Chand and Sons, New Delhi.

[24]   Ayouchi, R., Martin, F., Leinen, D. and Ramos-Barrado, J.R. (2003) Growth of Pure ZnO Thin Films Prepared by Chemical Spray Pyrolysis on Silicon. Journal of Crystal Growth, 247, 497-504.
http://dx.doi.org/10.1016/S0022-0248(02)01917-6

[25]   Hu, J. and Gordon, R.G. (1992) Atmospheric Pressure Chemical Vapor Deposition of Gallium Doped Zinc Oxide Thin Films from Diethyl Zinc, Water, and Triethyl Gallium. Journal of Applied Physics, 72, 5381-5392.
http://dx.doi.org/10.1063/1.351977

[26]   Hu, J. and Gordon, R.G. (1992b) Textured Aluminum-Doped Zinc Oxide Thin Films from Atmospheric Pressure Chemical-Vapor Deposition. Journal of Applied Physics, 71, 880-890.
http://dx.doi.org/10.1063/1.351309

[27]   Zunke, I., Heft, A., Schäfer, P., Haidu, F., Lehmann, D., Grünler, B. and Zahn, D.R.T. (2013) Conductive Zinc Oxide Thin Film Coatings by Combustion Chemical Vapour Deposition at Atmospheric Pressure. Thin Solid Films, 532, 50-55.
http://dx.doi.org/10.1016/j.tsf.2012.11.151

[28]   Liang, Z., Gao, R., Lan, J.L., Wiranwetchayan, O., Zhang, Q., Li, C. and Cao, G. (2013) Growth of Vertically Aligned ZnO Nanowalls for Inverted Polymer Solar Cells. Solar Energy Materials and Solar Cells, 117, 34-40.
http://dx.doi.org/10.1016/j.solmat.2013.05.019

[29]   Tucic, A., Marinkovic, Z.V., Mancic, L., Cilense, M. and Milosevic, O. (2003) Pyrosol Preparation and Structural Characterization of SnO2 Thin Films. Journal of Materials Processing Technology, 143, 41-45.
http://dx.doi.org/10.1016/S0924-0136(03)00316-9

[30]   Jiao, B.C., Zhang, X.D., Wei, C.C., Sun, J., Huang, Q. and Zhao, Y. (2011) Effect of Acetic Acid on ZnO: In Transparent Conductive Oxide Prepared by Ultrasonic Spray Pyrolysis. Thin Solid Films, 520, 1323-1329.
http://dx.doi.org/10.1016/j.tsf.2011.04.152

[31]   Miki-Yoshida, M., Paraguay-Delgado, F., Estrada-Lopez, W. and Andrade, E. (2000) Structure and Morphology of High Quality Indium-Doped ZnO Films Obtained by Spray Pyrolysis. Thin Solid Films, 376, 99-109.
http://dx.doi.org/10.1016/S0040-6090(00)01408-5

[32]   Lee, J.H., Lee, S.Y. and Park, B.O. (2006) Fabrication and Characteristics of Transparent Conducting In2O3-ZnO Thin Films by Ultrasonic Spray Pyrolysis. Materials Science and Engineering: B, 127, 267-271.
http://dx.doi.org/10.1016/j.mseb.2005.10.008

[33]   Badadhe, S.S. and Mulla, I.S. (2009) H2S Gas Sensitive Indium-Doped ZnO Thin Films: Preparation and Characterization. Sensors and Actuators B: Chemical, 143, 164-170.
http://dx.doi.org/10.1016/j.snb.2009.08.056

 
 
Top