OJMetal  Vol.4 No.4 , December 2014
Theoretical and Numerical Study of Stress and Thermo-Optic in Photonic Crystal Fiber Laser in Different Pump Schemes
Abstract: In this paper, we present a study of thermal, average power scaling, change in index of refraction and stress in photonic crystal fiber lasers with different pump schemes: forward pump scheme, backward pump scheme, forward pump scheme with reflection of 98%, backward pump scheme with reflection of 98% and bi-directional pump scheme. We show that management of thermal effects in fiber lasers will determine the efficiency and success of scaling-up efforts. In addition, we show that the most suitable scheme is the bi-directional.
Cite this paper: Abouricha, M. , Boulezhar, A. , Mouden, M. and Kriraa, M. (2014) Theoretical and Numerical Study of Stress and Thermo-Optic in Photonic Crystal Fiber Laser in Different Pump Schemes. Open Journal of Metal, 4, 120-130. doi: 10.4236/ojmetal.2014.44014.

[1]   Limpert, J., Liem, A., Zellmer, H. and Tunnerman, A. (2003) 500 W Continuous-Wave Fiber Laser with Excellent Beam Quality. Electronics Letters, 39, 645-647.

[2]   DiGiovanni, D.L. and Muendel, M.H. (1999) High Power Fiber Lasers and Amplifiers. Optics and Photonics News, 10, 26-30.

[3]   Platonov, N., Gapontsev, V.P., Shkurihin, O. and Zaitsev, I. (2003) 400 W Low-Noise Single-Mode CW Ytterbium Fiber Laser with an Integrated Fiber Delivery. Conference on Lasers and Electro-Optics, Optical Society of America, Washington DC, 6 June 2003.

[4]   Muendel, M.H. (1999) High-Power Fiber Laser Studies at the Polaroid Corporation. Proceedings of the SPIE Conference High-Power Lasers, San Jose, 24 June 1998, Vol. 3264, 21-29.

[5]   Shang, L. (2011) Comparative Study of the Output Characteristics of Ytterbium-Doped Double-Clad Fiber Lasers with Different Pump Schemes. Optik, 122, 1899-1902.

[6]   Knight, J.C. and Russell, P.St.J. (2002) New Ways to Guide Light. Science, 296, 276-277.

[7]   Knight, J.C., Briks, T.A., Cregan, R.F., et al., (1998) Large Mode Area Photonic Crystal Fiber. Electronics Letters, 34, 1347-1349.

[8]   Abouricha, M., Boulezhar, A. and Habiballah, N. (2013) The Comparative Study of the Temperature Distribution of Fiber Laser with Different Pump Schemes. Open Journal of Metal, 3, 64-71.

[9]   Limpert, J., Schreiber, T., Liem, A., Nolte, S. and Zellmer, H. (2003) Thermo-Optical Properties of Air-Clad Photonic Crystal Fiber Lasers in High Power Operation. Optics Express, 11, 2982-2990.

[10]   Boley, B.A. and Weiner, J.H. (1985) Theory of Thermal Stresses. Kreiger, Melbourne.

[11]   Brown, D.C. and Hoffman, H.J., IEEE Member (2001) Thermal, Stress, and Thermo-Optic Effects in High Average Power Double-Clad Silica Fiber Lasers. IEEE Journal of Quantum Electronics, 37, 207-217.

[12]   Bass, M., Ed. (1995) Handbook of Optics (Sponsored by the Optical Society of America). Vol. II, Devices, Measurements, and Properties. McGraw-Hill, New York.

[13]   Eggleston, J.M., Kane, T.J., Kuhn, K., Unternahrer, J. and Byer, R.L. (1984) The Slab Geometry Laser—Part I: Theory. The IEEE Journal of Quantum Electronics, QE-20, 289-301.

[14]   Brown, D.C. (1998) Nonlinear Thermal Distortion in YAG Rod Amplifiers. IEEE Journal of Quantum Electronics, 34, 2383-2382.

[15]   Krupke, W.F., Shinn, M.D., Marion, J.E., Caird, J.A. and Stokowski, S.E. (1986) Spectroscopic, Optical, and Thermomechanical Properties of Neodymium- and Chromium-Doped Gadolinium Scandium Gallium Garnet. Journal of the Optical Society of America B, 3, 102, 113.