JAMP  Vol.2 No.12 , November 2014
Selection of Influential Microfabric Properties of Anisotropic Amphibolite Rocks on Its Uniaxial Compressive Strength (UCS): A Comprehensive Statistical Study
Abstract: Occasionally, in complex inherent characteristics of certain rocks, especially anisotropic rocks it may be difficult to measure the uniaxial compressive strength UCS. However, the use of empirical relationships to evaluate the UCS of rock can be more practical and economical. Consequently, this study carried out to predict UCS from microfabrics properties of banded amphibolite rocks using multiple regression analysis. Based on statistical results, rock microfabric parameters, which adequately represent the UCS of a given rock type have been selected. The results show that grain size, shape factor and quartz content have high significant correlation with UCS at 95% confidence level. From multiple regression model, approximately 84% of the variance of the UCS can be estimated by the linear combination of these three parameters. However, according to model performance criteria: correlation coefficient (R = 0.919), variance account for (VAF = 97%) and root mean square error (RMSE = 4.16) the study clearly indicates that the developed model is reliable to predict the UCS. Finally, this approach can be easily extended to the modeling of rock strength in the absence of adequate geological information or abundant data.
Cite this paper: Ali, E. and Wu, G. (2014) Selection of Influential Microfabric Properties of Anisotropic Amphibolite Rocks on Its Uniaxial Compressive Strength (UCS): A Comprehensive Statistical Study. Journal of Applied Mathematics and Physics, 2, 1130-1138. doi: 10.4236/jamp.2014.212132.

[1]   Jumikis, A.R. (1992) Rock Mechanics. Trans. Tech. Publications, Clausthal.

[2]   Howarth, D.F. and Rowlands, J.C. (1987) Quantitative Assessment of Rock Texture and Correlation with Drillability and Strength Properties. Rock Mechanics and Rock Engineering, 20, 57-85.

[3]   Basu, A. and Kamran, M. (2010) Point Load Test on Schistose Rocks and Its Applicability in Predicting Uniaxial Compressive Strength. International Journal of Rock Mechanics & Mining Sciences, 47, 823-828.

[4]   Bruno, G., Vessia, G. and Bobbo, L. (2012) Statistical Method for Assessing the Uniaxial Compressive Strength of Carbonate Rock by Schmidt Hammer Tests Performed on Core Samples. Rock Mechanics and Rock Engineering, 46, 199-206.

[5]   Singh, T.N., Kainthola, A. and Venkatesh, A. (2012) A Correlation between Point Load Index and Uniaxial Compressive Strength for Different Rock Types. Rock Mechanics and Rock Engineering, 45, 259-264.

[6]   Khandelwal, M. (2013) Correlating P-Wave Velocity with the Physico-Mechanical Properties of Different Rocks. Pure and Applied Geophysics, 170, 507-514.

[7]   Abdolazim, A. and Rassoul, A. (2013) An Empirical Correlation of Uniaxial Compressive Strength with P-Wave Velocity and Point Load Strength Index on Marly Rocks Using Statistical Method. Geotechnical and Geological Engineering, 32, 205-214.

[8]   Seo, Y.S., Jeong, G.C., Kim, J.S. and Ichikawa, Y. (2002) Microscopic Observation and Contact Stress Analysis of Granite under Compression. Engineering Geology, 63, 259-275.

[9]   Vernon, R.H. (2004) A Practical Guide to Rock Microstructure. Cambridge University Press, Cambridge.

[10]   P?ikryl, R. (2006) Assessment of Rock Geomechanical Quality by Quantitative Rock Fabric Coefficients: Limitations and Possible Source of Misinterpretations. Engineering Geology, 87, 149-162.

[11]   Singh, V.K., Singh, D. and Singh, T.N. (2001) Prediction of Strength Properties of Some Schistose Rocks from Petrographic Properties Using Artificial Neural Networks. International Journal of Rock Mechanics & Mining Sciences, 38, 269-284.

[12]   Gokceoglu, C., Sonmez, H. and Zorlu, K. (2009) Estimating the Uniaxial Compressive Strength of Some Clay Bearing Rocks Selected from Turkey by Nonlinear Multivariable Regression and Rule-Based Fuzzy Models. Expert Systems, 26, 176-190.

[13]   Zorlu, K., Gokceoglu, C., Ocakoglu, F., Nefeslioglu, H.A. and Acikalin, S. (2008) Prediction of Uniaxial Compressive Strength of Sandstones Using Petrography Based Models. Engineering Geology, 96, 141-158.

[14]   Yesiloglu-Gultekin, N., Sezer, E.A., Gokceoglu, C. and Bayhan, H. (2013) An Application of Adaptive Neuro Fuzzy Inference System for Estimating the Uniaxial Compressive Strength of Certain Granitic Rocks from Their Mineral Contents. Expert Systems with Applications, 40, 921-928.

[15]   Jeng, F.S., Weng, M.C., Lin, M.L. and Huang, T.H. (2004) Influence of Petrographic Parameters on Geotechnical Properties of Tertiary Sandstones from Taiwan. Engineering Geology, 73, 71-91.

[16]   ASTM (2001) Standard Practice for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances. Am Soc Test Mater D4543.

[17]   ASTM (2010) ASTM D7012-10, Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures.

[18]   TIGER 3000P Polarized Software TC-M013, Version (2012) Chongqing Science and Technology Compa-ny.

[19]   Rais?nen, M. (2004) Relationships between Texture and Mechanical Properties of Hybrid Rocks from the Jaal-Iitti Complex, Southeastern Finland. Engineering Geology, 74, 197-211.

[20]   Shakoor, A. and Bonelli, R.E. (1991) Relationship between Petrographic Characteristics, Engineering Properties, and Mechanical Properties of Selected Sandstones. Bulletin of the International Association of Engineering Geology, 26, 55-71.

[21]   Davis, J.C. (1973) Statistics and Data Analysis in Geology. Wiley, New York, 550 p.

[22]   Harrell, F.E. (2001) Regression Modeling Strategies: With Applications to Linear Models, Logistic Regression, and Survival Analysis. Springer-Verlag, New York.

[23]   Finol, J., Guo, Y.K. and Jing, X.D. (2001) A Rule Based Fuzzy Model for the Prediction of Petrophysical Rock Parameters. Journal of Petroleum Science and Engineering, 29, 97-113.