AMPC  Vol.4 No.12 , December 2014
More Value of Maroua Clay in the Formulation of Ceramic Products (Terracotta, Earthenware, Stoneware, Porcelain)
Abstract: As a part of the framework of the development of ceramic products, scientific research continues this idea that clays are essential vehicles for local development in Africa; and therefore they deserve to be made profitable. This scientific work has the advantage of providing a solution to the housing of the Sahel area. On the other hand, this study can effectively serve as the basis of data in the formulation of ceramics from clay Maroua, in the region of the Far North Cameroon, for a large-scale industrial operation. Thus, two samples of materials respectively KO1 and IP2 have been the subject of a preliminary chemical and mineralogical size rheological study. Once formed, the tubes containing the KO1 and PI2 materials have undergone heat treatment at successive temperatures of 900°C, 1000°C and 1100°C. The baked products obtained have also been the subject of a study of resonance, coloring density, loss on ignition, water absorption, linear shrinkage, porosity and mechanical compression.
Cite this paper: Touolak, B. and Nya, F. (2014) More Value of Maroua Clay in the Formulation of Ceramic Products (Terracotta, Earthenware, Stoneware, Porcelain). Advances in Materials Physics and Chemistry, 4, 284-299. doi: 10.4236/ampc.2014.412031.

[1]   Nkoumbou, C., Villieras, F., Barres, O., Njopwouo, D. and Yvon, J. (2008) Physicochemical Properties of Talc Ore from Pout-Kelle and Memel Deposits (Central Cameroon). Clay Mineral, 43, 317.

[2]   Dondi, M., Ercolani, G., Melandri, C. and Mingazzini, C. (1999) The Chemical Composition of Porcelain Stoneware Tiles and Its Influence on Microstructural and Mechanical Properties. Interceram, 48, 75-83.

[3]   Pialy, P., Nkoumbou, C., Villieras, F., Yvon, J. and Bonnet, J.-P. (2009) Characterization for Ceramic Applications of Clay Materials from Lembo Deposit, Mount Bana (Cameroon). Silicates Industriels, 74, 11-12.

[4]   Moreira, J., Manhaes, J. and Holanda, J. (2007) Processing of Red Ceramic Using Ornamental. Elsevier, Amsterdam, 88-93.

[5]   Nkoumbou, C., Njopwouo, D., Villiéras, F., Tchoua, F.M. and Yvon, J. (2006) Talc Indices from Boumnyebel (Central Cameroon), Physico-Chemical Characteristics and Geochemistry. Journal of African Earth Sciences, 45, 61-73.

[6]   Njoya, D., Hajjaji, M., Nkoumbou, C., Elimbi, A., Kwekam, M., Njoya, A., Yvon, J. and Njopwouo, D. (2010) Chemical and Mineralogical Characterization and Ceramic Suitability of Raw Feldspathic Materials from Dschang (Cameroon). Bulletin of the Chemical Society of Ethiopia, 24, 39-46.

[7]   NEMBOUE (2007) Cours de matériaux de construction. ENSP, Yaoundé1, Yaoundé.

[8]   Nkoumbou, C., Barbey, P., Yonta-Ngouné, C., Paquette, J.L. and Villiéras, F. (2014) Pre-Collisional Geodynamic Context of the Southern Margin of the Pan-African Fold Belt in Cameroon. Journal of African Earth Sciences, 99, 245-260.

[9]   Ghomari, F. (2012). Cours de science de matériaux de construction. Département de génie civil, science de l’ingénieur, Uni. d’Aboubekr Belkaid.

[10]   Boch, P. (2001) Matériaux et processus céramiques. Edition BOCH. Hermès science publications, Paris, 283 p.

[11]   Kamseu, E., Nzeukou, A., Lemougna, P., Billong, N., Melo, U.C. and Leonelli, C. (2013) Induration of Laterites in Tropical Areas: Assessment for Potential Structural Applications. Interceram, 6, 431-439.

[12]   Bakop, T.T., Tene Fongang, R.T., Melo, U.C., Kamseu, E., Miselli, P. and Leonelli, C. (2013) Sintering Behaviors of Two Porcelainized Stoneware Compositions Using Pegmatite and Neheline Syenite Minerals. Journal of Thermal Analysis and Calorimetry, 114, 113-123.

[13]   Bignozzi, M.C., Manzi, S., Lancellotti, I., Kamseu, E., Barbieri, L. and Leonelli, C. (2013) Mix-Design and Characterization of Alkali Activated Materials Based on Metakaolin and Ladle Slag. Applied Clay Science, 73, 78-85.

[14]   Kamseu, E., Bakop, T., Djangang, C., Melo, U.C., Hanuskova, M. and Leonelli, C. (2013) Porcelain Stoneware with Pegmatite and Nepheline Syenite Solid Solutions: Pore Size Distribution and Descriptive Microstructure. Journal of the European Ceramic Society, 33, 2775-2784.

[15]   Kamseu, E., Bignozzi, M.C., Melo, U.C., Leonelli, C. and Sglavo, V.M. (2013) Design of Inorganic Polymer Cements: Effects of Matrix Strengthening on Microstructure. Construction and Building Materials, 38, 1135-1145.

[16]   Tamen, J., Nkoumbou, C., Reusser, E. and Tchoua, F. (2015) Petrology and Geochemistry of Mantle Xenoliths from the Kapsiki Plateau (Cameroon Volcanic Line): Implications for Lithospheric Upwelling. Journal of African Earth Sciences, 101, 119-134.

[17]   Selim, D. (2005) Matériaux et revêtements céramiques multi fonctionnals par PECVD ET SPS pour l’intégration de puissance haute température haute-tension.

[18]   Dejou, J. (2010) Les céramiques. Support de cours. Sociétés francophone des biomatériaux dentaires.

[19]   Catauro, M., Bollino, F., Lancellotti, I., Kamseu, E. and Leonelli, C. (2010) Chemical and Biological Characterization of Geopolymers for Potential Application as Hard Tissue Prostheses. Advances in Science and Technology, 69, 192-197.

[20]   Romagnoli, M., Leonelli, C., Kamseu, E. and Gualtieri, M.L. (2012) Rheology of Geopolymer by DOE Approach. Construction and Building Materials, 36, 251-258.

[21]   Catauro, M., Bollino, F., Kansal, I., Kamseu, E., Lancellotti, I. and Leonelli, C. (2012) Mechanical and Biological Characterization of Geopolymers for Potential Application as Biomaterials.

[22]   Kamseu, E., Ceron, B., Tobias, F., Leonelli, E., Bignozzi, M.C., Muscio, A. and Libbra, A. (2012) Insulating Behavior of Metakaolin-Based Geopolymer Materials Assess with Heat Flux Meter and Laser Flash Techniques. Journal of Thermal Analysis and Calorimetry, 108, 1189-1199.

[23]   Kamseu, E., Nait-Ali, B., Bignozzi, M.C., Leonelli, C., Rossignol, S. and Smith, D.S. (2012) Bulk Composition and Microstructure Dependence of Effective Thermal Conductivity of Porous Inorganic Polymer Cements. Journal of the European Ceramic Society, 32, 1593-1603.

[24]   Kamseu, E., Catania, V., Djangang, C., Sglavo, V.M. and Leonelli, C. (2012) Correlation between Microstructural Evolution and Mechanical Properties of α-Quartz and Alumina Reinforced K-Geopolymers during High Temperature Treatments. Advances in Applied Ceramics, 111, 120-128.

[25]   Kamseu, E., Leonelli, C. and Obonyo, E. (2011) Evolution of Fired Clay Products: From Origin to Sustainable Building Ceramics. Interceram, 60, 221-225.

[26]   Djanganga, C.N., Kamseu, E., Lecomte, G.L., Soro, J., Melo, U.C., Elimbi, A., Blanchart, P. and Njopwouo, D. (2011) Sintering Behavior of Porous Refractory Kaolin-Corundum Composites: Phase Evolution and Densification. Materials Science and Engineering: A, 528, 8311-8318.

[27]   Obonyo, E., Kamseu, E., Melo, U.C. and Leonelli, C. (2011) Advancing the Use of Secondary Inputs in Geopolymer Binders for Sustainable Cementitious Composites: A Review. Sustainability, 3, 410-423.

[28]   Kamseu, E., Leonelli, C., Chinje, U.M., Perera, D.S. and Leougna, P.N. (2011) Polysialate Matrixes from Al-Rich and Si-Rich Metakaolins: Polycondensation and Physico-Chemical Properties. Interceram, 60, 25-31.

[29]   Lemougna, P.N., Chinje Melo, U.F., Kamseu, E. and Tchamba, A.B. (2011) Laterite Based Stabilized Products for Sustainable Building Applications in Tropical Countries: Review and Prospects for the Case of Cameroon. Sustainability, 3, 293-305.

[30]   Billong, N., Melo, U.C., Kamseu, E., Kinuthia, J.M. and Njopwouo, D. (2011) Improving Hydraulic Properties of Lime-Rice Husk Ash (RHA) Binders with Metakaolin (MK). Construction and Building Materials, 25, 2157-2161.

[31]   Tippayasam, C., Boonsalee, S., Sajjavanich, S., Ponzoni, C., Kamseu, E. and Chaysuwan, D. (2010) Geopolymer Development by Powders of Metakaolin and Wastes in Thailand. Advances in Science and Technology, 69, 63-68.

[32]   Kamseu, E., Rizzuti, A., Leonelli, C. and Pereran, D. (2010) Enhanced Thermal Stability in K2O-Metakaolin-Based Geopolymer Concretes by Al2O3 and SiO2 Fillers Addition. Journal of Materials Science, 45, 1715-1724.

[33]   Kamseu, E., Leonelli, C., Boccaccini, D.N., Veronesi, P., Sglavo, V.M., Sglavo, V.M., Melo, U.C. and Jopwouo, D.N. (2009) Alkali-Silica Glassy Matrix (AGM) as Replacement for Feldspar in Conventional Porcelain Compositions. Silicates Industriels, 74, 131-138.

[34]   Djangang, C.N., Kamseu, E., Elimbi, A., Lecomte, G.L. and Blanchart, P. (2014) Net-Shape Clay Ceramics with Glass Waste Additive. Materials Sciences and Applications, 5, 592-602.

[35]   Kamseu, E., Braccini, S., Corradi, A. and Leonelli, C. (2009) Microstuctural Evolution during Thermal Treatment of Three Kaolinitic Clays from Cameroon. Advances in Applied Ceramics, 108, 338-346.

[36]   Kamseu, E., Leonelli, C., Perera, D.N., Melo, U.C. and Lemougna, P.N. (2009) Investigation of Volcanic Ash Based Geopolymers as Potential Building Materials. Interceram, 58, 136-140.

[37]   Leonelli, C., Kamseu, Melo, U.C., Corradi, A. and Pellacani, G.C. (2008) Mullitisation Behavior during Thermal Treatment of Three Kaolinitic Clays from Cameroon: Densification, Sintering Kinetic and Microstructure. Interceram, 57, 396-401.

[38]   Lemougna, P.N., Balo Madi, A., Kamseu, E., Melo, U.C., Delplancke, M.P. and Rahier, H. (2014) Influence of the Processing Temperature on the Compressive Strength of Na Activated Lateritic Soil for Building Applications. Construction & Building Materials, 65, 60-66.

[39]   Kamseu, E., Rizzuti, A., Miselli, P., Veronesi, P. and Leonelli, C. (2009) Use of Noncontact Dilatometry for the Assessment of the Sintering Kinetics during Mullitization of Three Kaolinitic Clays from Cameroon. Journal of Thermal Analysis and Calorimetry, 98, 757-763.

[40]   Leonelli, C., Kamseu, E., Boccaccini, D.N., Sglavo, V.M. and Pellacani, G.C. (2009) Alkali-Ions Diffusion, Mullite Formation, and Crystals Dissolution during Sintering of Porcelain Bodies: Microstructural Approach. Journal of Materials: Design and Applications, 223, 183-191.

[41]   Leonelli, C., Kamseu, E., Melo, U.C., Corradi, A. and Pellacani, G.C. (2009) Descriptive Microstructure and Fracture Surface Observations of Fired Volcanic Ash. Journal of Materials Science, 44, 4944-4952.

[42]   Tchamba, A.B., Melo, U.C., Lecomte-Nana, G.L., Kamseu, E., Gault, C., Yongue, R. and Njopwouo, D. (2014) Use of Bauxite from Cameroon for Solid State Sintering and Characterization of Calcium Dialuminate (CaO2Al2O3) Refractory Cement. Ceramics International, 40, 1961-1970.