EPE  Vol.6 No.14 , December 2014
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic
Abstract: This paper focused on selection of best materials for absorber tube and reflective surfaces of Solar Parabolic Collector (SPC) using fuzzy logic, after analysing the material data. The glass mirror and Aluminium absorber have been identified as best materials. These selected materials are replaced in existing experimental setup. An experimental design is prepared based on the considered parabolic collector parameters: Absorptivity, Reflectivity and Period of Sun Incidence. During experiments, outlet temperature of water and discharge is recorded for each experimental run. These data are analyzed using fuzzy Logic integrated with the Taguchi method and optimal parameter combination has been found.
Cite this paper: Reddy, S. , Venkataramaiah, P. and Reddy, D. (2014) Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic. Energy and Power Engineering, 6, 527-536. doi: 10.4236/epe.2014.614046.

[1]   Silio Salcines, D. and Renedo Estebanez, C. (2009) Simulation of Solar Domestic Water Heating System, with Different Collector Efficiencies and Different Volume Storage Tanks. International Conference on Renewable Energies and Power Quality, 41, 111-120.

[2]   Kaplanis, S. and Barakos, G. (2002) Flat Plate and Concentrating Collectors: A Comparison of Their Performances. Transilvania University of Brasov, Romania.

[3]   Rai, G.D. (2010) Nonconventional Energy Recourses. Khanna Publishers, New Delhi.

[4]   Sinha, U.K. and Sharma, S.P. (2008) Developed “Modelling for the Parabolic Collector for solar Thermal Electric Power”. ARISER, 4, 205-211.

[5]   Venkataramaiah, P.P., Reddy, M. and Sairam, P. (2013) Simulation and Optimisation Studies on a Solar Parabolic Collector: An Experimental Investigation. Taylor & Francis group in International Journal of Sustainable Energy, 33.

[6]   Adhikary, P., Roy, P.K. and Mazumdar, A. (2013) Selection of Hydro-Turbine Blade Material: Application of Fuzzy Logic (MCDA). International Journal of Engineering Research and Applications, 3, 426-430.

[7]   Mohana Reddy, P., Venkataramaiah, P. and Rohit, B.J. (2012) Selection of Materials for Solar Flat Plate Collector Using AHP. International Journal of Engineering Research and Applications, 2, 816-824.

[8]   Yilmaz, O., Eyercioglu, O. and Gindy, N.N.Z. (2006) A User Friendly Fuzzy Based System for the Selection of Electro Discharge Machining Process Parameters. Journal of Materials Process Technology, 172, 363-371.

[9]   Tzeng, Y. and Chen, F. (2007) Multi-Objective Optimization of High-Speed Electrical Discharge Machining Process Using a Taguchi Fuzzy-Based Approach. Journal of Materials and Design, 28, 1159-1168.

[10]   Rajyalakshmi, G. and Ramaiah. P (2013) Optimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method. International Journal of Scientific Engineering and Technology, 2, 600-606.

[11]   Khabbaz, R.S., Manshadi, B.D., Abedian, A. and Mahmudi, R. (2009) A Simplified Fuzzy Logic Approach for Materials Selection in Mechanical Engineering Design. Materials and Design, 30, 687-697.

[12]   Vimal Sam Singh, R., Latha, B. and Senthilkumar, V.S. (2009) Modelling and Analysis of Thrust Force and Torque in drilling GFRP Composites by Multi-Facet Drill Using Fuzzy Logic. International Journal of Recent Trends in Engineering, 1, 66-70.

[13]   Zadeh, L. (1965) Fuzzy Sets. Information and Control, 8, 338-353.

[14]   Kao, C.C., Albert, J.S. and Miller, S.F. (2008) Fuzzy Logic Control of Micro-Hole Electrical Discharge Machining. Journal of Manufacturing Science and Engineering, 130, 064502-1.

[15]   Lin, J.L. and Lin, C.L. (2005) The Use of Grey-Fuzzy Logic for the Optimization of the Manufacturing Process. Journal of Materials Processing Technology, 160, 9-14.