JECTC  Vol.4 No.4 , December 2014
Obtaining of Nanocomposites in SiC-SiAlON and Al2O3-SiAlON System by Alumothermal Processes
Abstract: Composites were obtained in the in SiC-SiAlON and Al2O3-SiAlON system. Physical-chemical processes going on at the obtaining of SiALON within the range of 800°C - 1500°C were studied. Charge compositions and sintering regime were selected. It was proved that X-SiALON was obtained at the sintering of kaolin-aluminum powder at 1500°C, while β-SiALON was formed at the sintering of SiC-Aluminum powder, silicium and Al2O3-aluminum powder, silicium at 1500°C. Corrosion properties of the materials were studied. Investigations were performed by the methods of X-Ray structural and microscopical analysis.
Cite this paper: Kovziridze, Z. , Nizharadze, N. , Tabatadze, G. , Cheishvili, T. , Mestvirishvili, Z. , Nikoleishvili, E. , Mshvildadze, M. and Darakhvelidze, N. (2014) Obtaining of Nanocomposites in SiC-SiAlON and Al2O3-SiAlON System by Alumothermal Processes. Journal of Electronics Cooling and Thermal Control, 4, 105-117. doi: 10.4236/jectc.2014.44012.

[1]   Gusman, I.Y., Тumakova, E.I. and Fedotov, A.V. (1970) Correlative Studies of Some Properties of Materials Based on Composites SiC+Si3N4 and SiC-Si2N2. Refractroies, 3, 44-48.

[2]   Kilian, M.F. (1987) Produktionsverfahren, Anwendungseigenschaften und Einsatzmoegichkeiten von Nitridkeramik insbesondere von Siliciumniеtrid. Vortragsvero ff. Haus Techn., Essen, 519, 19-21.

[3]   Wang, L., He, C., Wu, J. Oxidation of Sintered Silicon Nitride Materials. Ceram. Mater and Comp. Engin. Proc. Jnt. Simp. Las Vegas, 27-30 November 1988, Westerville, Ohio, 1989, 604-611.

[4]   Belij, Ya.I., Lomda, V.V., Svistun, V.M. and Polezhai, S.G.( 1990) For the Issue of Obtaining Composite Materials Based on Silicium Nitride. Moscow International Conference, Abstracts of Reports, Part 2, 174.

[5]   Zheng, G.M., Zhao, J., Gao, Z.J. and Cao, Q.Y. (2012) Cutting Performance and Wear Mechanisms at Sialon-Si3N4 Graded Nano-Composite Ceramic Cutting Tools. The International Journal of advanced Manufacturing Technology, 58, 19-28.

[6]   Riley, F.L. (2000) Silicon Nitride and Related Materials. Journal of the American Ceramic Society, 83, 10-30.

[7]   Luthra, K.L. (1991) A Mixed Interface Reaction/Diffusion Control Method for Oxidation of Silicon Nitride. Journal of the Electrochemical Society, 138, 3001-3007.

[8]   Ogbuji, L.U.J.T. (1992) Role of Si2N2O in the Passive Oxidation of Chemically-Vapor-Deposited Si3N4. Journal of the American Ceramic Society, 75, 2995-3000.

[9]   Kawai, C. and Yamakawa, A. (1997) Effect of Porosity and Microstructure on the Strength of Si3N4: Designed Microstructure for High Strength, High Thermal Shock Resistance, and Facile Machining. Journal of the American Ceramic Society, 80, 2705-2708.

[10]   Cerenius, Y. (1999) Melting Temperature Measurements on α-Silicon Nitride to a Pressure of 37 GPa. Journal of the American Ceramic Society, 82, 380-386.

[11]   Chukholina, L.N. (2012) Method for Obtaining Sialon Powder.

[12]   Http://

[13]   Borovinskaya, I.P. and Smirnov, K.L. (1998) Self-Spreading High Temperature Synthesis of Sialon Ceramics. Science for Industry, 8, 39-45.

[14]   Boyarina, I.L., Puchkov, A.B., et al. (1981) Sialons, a New Refractory Material. Refractory, 12, 24-28.

[15]   Van Landeghem, H.P., Goune, M., Redjamia, A. (2012) Investigation of a Ferrite/Silicon Nitride Composite Concept Aimed at Automotive Applications. Steel Research International, 83, 590-593.

[16]   Rosenflanz, A. and Chen, I.-W. (1999) Phase Relationships and Stability of α-Sialon. Journal of the American Ceramic Society, 82, 1025-1036.

[17]   Land, P.L., Wimmer, J.M., Burns, R.W and Choudhury, N.S. (1978) Compounds and Properties of the System Si-AL- O-N. Journal of the American Ceramic Society, 61, 50-60.

[18]   Ekström, T. and Nygren, M. (1992) Sialon Ceramics. Journal of the American Ceramic Society, 75, 259-276.

[19]   Schmucker, M. and Schneider, H. (1999) Transformation of X-Phase Sialon to Mullite. Journal of the American Ceramic Society, 82, 1934-1936.

[20]   Anya, C.C. and Hendry, A. (1994) Hardness, Indentation Fracture Toughness and Compositional Formula of X-Phase Sialon. Journal of Materials Science, 29, 527-533.

[21]   Ekström, T. and Olsson, P.O. (1989) Beta-Sialon Ceramics Prepared at 1700 °C by Hot Isostatic Pressing. Journal of the American Ceramic Society, 72, 1722-1724.

[22]   Ekström, T., Käll, P.O., Nygren, M. and Olsson, P.O. (1989) Dense Single-Phase Beta-Sialon Ceramics by Glass-En- capsulated Hot Isostatic Pressing. Journal of Materials Science, 24, 1853-1861.

[23]   Kishi, K., Umebayashi, S. and Tani, E. (1990) Influence of Microstructure on Strength and Fracture Toughness of Beta-Sialon. Journal of Materials Science, 25, 2780-2784.

[24]   Piekarczyk, J., Lis, J. and Bialoskorski, J. (1990) Elastic Properties, Hardness, and Indentation Fracture Toughness of Beta-Sialons. Key Engineering Materials, 89-91, 542-546.

[25]   Jiang, X., Baek, Y.K., Lee, S.M. and Kang, S.J.L. (1998) Formation of an α-Sialon Layer on β-Sialon and Its Effect on Mechanical Properties. Journal of the American Ceramic Society, 81, 1907-1912.