MSA  Vol.5 No.14 , December 2014
Nanoporous Silicon-Based Ammonia-Fed Fuel Cells
ABSTRACT
The objective of the paper is to report results on fabrication, structural, morphological and performance characteristics of novel TiO2/PS/Si, Au/TiO2/PS/Si and Au/PS/Si direct ammonia fuel cells (DAFC) using nanoporous silicon (PS) as proton conducting membrane (instead of traditional polymer Nafion membrane) and TiO2, Au/TiO2 or Au as catalyst layer. Porous silicon layers have been prepared by electrochemical modification of silicon substrates. Films containing titanium dioxide are more efficient catalysts for hydrogen production from ammonia solution. The Au/ TiO2/PS/Si cell exhibited the open circuit voltage 0.87 V and performance of 1.6 mW/cm2 with 50% ammonia solution as fuel at room temperature. Mechanisms of proton transport in nanoporous silicon membrane and generation of electricity in DAFC have been considered. Advantages of investigated direct ammonia fuel cells consist in simplicity of fabrication technology, which can be integrated into standard silicon micro fabrication processes and operation of cells at room temperature. The work demonstrates that the PS based fuel cells have potential for portable applications.

Cite this paper
Dzhafarov, T. , Yuksel, S. and Aydin, M. (2014) Nanoporous Silicon-Based Ammonia-Fed Fuel Cells. Materials Sciences and Applications, 5, 1020-1026. doi: 10.4236/msa.2014.514104.
References
[1]   Cheddia, D. (2012) Ammonia as a Hydrogen Source for Fuel Cells. In: Minic, D., Ed., Hydrogen Energy—Challenges and Perspectives, Intech, Rijeka, 333-362.
http://dx.doi.org/10.5772/47759

[2]   Limin, Z., You, C., Weishen, Y. and Liwu, L. (2007) A Direct Ammonia Tubular Solid Oxide Fuel Cell. Chinese Journal of Catalysis, 28, 749-751.
http://dx.doi.org/10.1016/S1872-2067(07)60062-X

[3]   Limin, Z. and Weishen, Y. (2008) Direct Ammonia Solid Oxide Fuel Cell Based on Thin Proton-Conducting Electrolyte. Power Sources, 179, 92-95.
http://dx.doi.org/10.1016/j.jpowsour.2007.12.061

[4]   Simons, E.L., Cairns, E.J. and Surd, D. (1969) The Performance of Direct Ammonia Fuel Cells. Journal of the Electrochemical Society, 116, 556-561.
http://dx.doi.org/10.1149/1.2411961

[5]   Nagle, L.C. and Rohan, J.F. (2011) Nanoporous Gold Catalyst for Direct Ammonia Borane Fuel Cells. Journal of the Electrochemical Society, 158, B772-B776.
http://dx.doi.org/10.1149/1.3583637

[6]   Dzhafarov, T.D. and Yuksel, S.A. (2011) Nano-Porous Silicon-Based Mini Hydrogen Fuel Cells. In: Manzanera, M., Ed., Alternative Fuel, Intech, Rijeka, 309-334.
http://dx.doi.org/10.5772/25272

[7]   Li, X. and Faghri, A. (2013) Review and Advances of Direct Methanol Fuel Cells (DMFCs) Part I: Design, Fabrication, and Testing with High Concentration Methanol Solutions. Power Sources, 226, 223-240.
http://dx.doi.org/10.1016/j.jpowsour.2012.10.061

[8]   Dzhafarov, T.D., Oruc Lus, C., Aydin Yuksel, S., Yesilkaya, S. and Caliskan, M. (2010) Au/Porous Silicon-Based Sodium Borohydride Fuel Cells. International Journal of Energy Research, 34, 1386-1392.
http://dx.doi.org/10.1002/er.1680

[9]   Dzhafarov, T.D. and Aydin Yuksel, S. (2011) Porous Silicon-Based Direct Hydrogen Sulphide Fuel Cell. Journal of Nanoscience and Nanotechnology, 11, 9012-9015.

[10]   Chen, H., Liu, J. and Huang, W. (2006) Corrosion Behavior of Silicon Nitride Bonding Silicon Carbide in Molten Magnesium and AZ91 Magnesium Alloy. Materials Science and Engineering: A, 415, 291-296.
http://dx.doi.org/10.1016/j.msea.2005.09.106

[11]   Zamfiresku, C. and Dincer, I. (2008) Using Ammonia as a Sustainable Fuel. Journal of Power Sources, 185, 459-465.
http://dx.doi.org/10.1016/j.jpowsour.2008.02.097

[12]   Dzhafarov, T.D. and Can, B. (2000) The Diffusion Redistribution of Hydrogen and Oxygen in Porous Silicon Films. Journal of Materials Science Letters, 19, 287-290.
http://dx.doi.org/10.1023/A:1006746226563

[13]   Chu, K., Shanon, M.A. and Masel, R.I. (2007) Porous Silicon Fuel Cells for Micro Power Generation. Journal of Micromechanics and Microengineering, 17, S243-S248.
http://dx.doi.org/10.1088/0960-1317/17/9/S06

 
 
Top