MSA  Vol.5 No.13 , November 2014
Influence of Blend Composition and Compatibilizer on Mechanical and Morphological Properties of Recycled HDPE/PET Blends
ABSTRACT
Polymer blends based on recycled high density polyethylene (rHDPE) and recycled poly(ethylene terephthalate) (rPET) with and without ethylene-glycidyl methacrylate copolymer (E-GMA) as compatibilizer were fabricated in a co-rotating twin screw extruder. The effects of rPET and compatibilizer content on the mechanical properties and morphological stability of rHDPE-rich blends were investigated. The rHDPE/rPET (75/25 wt/wt) blend compatibilized with 5 php (per 100 part of polymer) E-GMA showed an enhancement of about 7% - 26% in tensile properties and flexural strength as compared with those of the neat rHDPE. The strain at break showed a decreasing trend as the rPET content increased. The addition of E-GMA to the rHDPE/rPET blends was found to recover the blend toughness as well as improving the compatibility between HDPE and PET. In this study, the highest strain at break was obtained for the rHDPE/rPET blends at 75/25 (wt/wt) composition with E-GMA content of 5 php. FTIR and SEM analysis of the compatibilized blends confirmed the chemical interaction and improved interfacial bonding between the two phases.

Cite this paper
Chen, R. , Ab Ghani, M. , Salleh, M. , Ahmad, S. and Gan, S. (2014) Influence of Blend Composition and Compatibilizer on Mechanical and Morphological Properties of Recycled HDPE/PET Blends. Materials Sciences and Applications, 5, 943-952. doi: 10.4236/msa.2014.513096.
References
[1]   Madi, N.K. (2013) Thermal and Mechanical Properties of Injection Molded Recycled High Density Polyethylene Blends with Virgin Isotactic Polypropylene. Materials and Design, 46, 435-441.
http://dx.doi.org/10.1016/j.matdes.2012.10.004

[2]   Chen, R.S., Ab Ghani, M.H., Ahmad, S., Salleh, M.N. and Tarawneh, M.A. (2014) Rice Husk Flour Biocomposites Based on Recycled High-Density Polyethylene/Polyethylene Terephthalate Blend: Effect of High Filler Loading on Physical, Mechanical And Thermal Properties. Journal of Composite Materials, 1-13.

[3]   Khan, Z.A., Kamaruddin, S. and Siddiquee, A.N. (2010) Feasibility Study of Use of Recycled High Density Polyethylene and Multi Response Optimization of Injection Moulding Parameters Using Combined Grey Relational And Principal Component Analyses. Materials and Design, 31, 2925-2931.
http://dx.doi.org/10.1016/j.matdes.2009.12.028

[4]   Jarukumjorn, K. and Chareunkvun, S. (2007) Compatibilization of Recycled High Density Polyethylene (HDPE)/ Polyethylene Terephthalate (PET) Blends. Suranaree Journal of Science and Technology, 14, 1-8.

[5]   Wang, H., Qian, Q., Jiang, X., Liu, X., Xiao, L., Huang, B., et al. (2012) Melt Rheological and Compatibility Properties of Recycled Poly(ethylene terephthalate)/Poly(acrylonitrile-butadiene-styrene) Blends. Journal of Applied Polymer Science, 126, E266-E272.
http://dx.doi.org/10.1002/app.36984

[6]   Fasce, L., Seltzer, R., Frontini, P., Pita, V.J.R., Pacheco, E.B.A.V. and Dias, M.L. (2005) Mechanical and Fracture Characterization of 50:50 HDPE/PET Blends Presenting Different Phase Morphologies. Polymer Engineering & Science, 45, 354-363.
http://dx.doi.org/10.1002/pen.20282

[7]   Lei, Y., Wu, Q., Clemons, C.M. and Guo, W. (2009) Phase Structure and Properties of Poly(ethylene terephthalate)/ High-Density Polyethylene Based on Recycled Materials. Journal of Applied Polymer Science, 113, 1710-1719.
http://dx.doi.org/10.1002/app.30178

[8]   Stary, Z., Pemsel, T., Baldrian, J. and Münstedt, H. (2012) Influence of a Compatibilizer on the Morphology Development in Polymer Blends under Elongation. Polymer, 53, 1881-1889.
http://dx.doi.org/10.1016/j.polymer.2012.02.056

[9]   Lei, Y., Wu, Q. and Zhang, Q. (2009) Morphology and Properties of Microfibrillar Composites Based on Recycled Poly(ethylene terephthalate) and High Density Polyethylene. Composites Part A: Applied Science and Manufacturing, 40, 904-912.
http://dx.doi.org/10.1016/j.compositesa.2009.04.017

[10]   Pawlak, A., Morawiec, J., Pazzagli, F., Pracella, M. and Galeski, A. (2002) Recycling of Postconsumer Poly(ethylene terephthalate) and High-Density Polyethylene by Compatibilized Blending. Journal of Applied Polymer Science, 86, 1473-1485.
http://dx.doi.org/10.1002/app.11307

[11]   Mbarek, S., Jaziri, M., Chalamet, Y. and Carrot, C. (2010) Effect of the Viscosity Ratio on the Morphology and Properties of PET/HDPE Blends with and without Compatibilization. Journal of Applied Polymer Science, 117, 1683-1694.
http://dx.doi.org/10.1002/app.32050

[12]   Li, S.C. and Lu, L.N. (2008) Melt Rheological Properties of Reactive Compatibilized HDPE/PET Blends. Journal of Applied Polymer Science, 108, 3559-3564.
http://dx.doi.org/10.1002/app.28031

[13]   Asgari, M. and Masoomi, M. (2012) Thermal and Impact Study of PP/PET Fibre Composites Compatibilized with Glycidyl Methacrylate and Maleic Anhydride. Composites Part B: Engineering, 43, 1164-1170.
http://dx.doi.org/10.1016/j.compositesb.2011.11.035

[14]   Houshyar, S., Shanks, R.A. and Hodzic, A. (2005) The Effect of Fiber Concentration on Mechanical and Thermal Properties of Fiber-Reinforced Polypropylene Composites. Journal of Applied Polymer Science, 96, 2260-2272.
http://dx.doi.org/10.1002/app.20874

[15]   Santos, P. and Pezzin, S.H. (2003) Mechanical Properties of Polypropylene Reinforced with Recycled-Pet Fibres. Journal of Materials Processing Technology, 143-144, 517-520.
http://dx.doi.org/10.1016/S0924-0136(03)00391-1

[16]   Yesil, S., Koysuren, O. and Bayram, G. (2010) Effect of Microfiber Reinforcement on the Morphology, Electrical, and Mechanical Properties of the Polyethylene/Poly(ethylene Terephthalate)/Carbon Nanotube Composites. Polymer Engineering & Science, 50, 2093-2105.
http://dx.doi.org/10.1002/pen.21740

[17]   Yi, X., Xu, L., Wang, Y.L., Zhong, G.J., Ji, X. and Li, Z.M. (2010) Morphology and Properties of Isotactic Polypropylene/Poly(ethylene Terephthalate) in Situ Microfibrillar Reinforced Blends: Influence of Viscosity Ratio. European Polymer Journal, 46, 719-730.
http://dx.doi.org/10.1016/j.eurpolymj.2009.12.027

[18]   Guerrero, C., Lozano, T., González, V. and Arroyo, E. (2001) Properties and Morphology of Poly(ethylene Terephthalate) and High-Density Polyethylene Blends. Journal of Applied Polymer Science, 82, 1382-1390.
http://dx.doi.org/10.1002/app.1975

[19]   Tsai, C.H. and Chang, F.C. (1996) Polymer Blends of PBT and PP Compatibilized by Ethylene-co-Glycidyl Methacrylate Copolymers. Journal of Applied Polymer Science, 61, 321-332.

[20]   Li, Z.M., Yang, M.B., Feng, J.M., Yang, W. and Huang, R. (2002) Morphology of in Situ Poly(ethylene Terephthalate)/Polyethylene Microfiber Reinforced Composite Formed via Slit-Die Extrusion and Hot-Stretching. Materials Research Bulletin, 37, 2185-2197.
http://dx.doi.org/10.1016/S0025-5408(02)00894-2

[21]   Si, X., Guo, L., Wang, Y. and Lau, K.T. (2008) Preparation and Study of Polypropylene/Polyethylene Terephthalate Composite Fibres. Composites Science and Technology, 68, 2943-2947.
http://dx.doi.org/10.1016/j.compscitech.2007.11.008

 
 
Top