Back
 MME  Vol.4 No.4 , November 2014
Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting
Sinitsyna Vasilya, Sinitsyn Anton
Show more
Abstract: This paper includes descriptions of the stress distribution regularities in the tight joint parts, regularities of the stress state changes in the contact region along coupling length, stress concentration factors, levels of additional stresses caused by press fitting. Distributions of stress intensity, axial stress, contact pressure, tangent stress in parts and in contact zone along coupling length are considered. Calculation results obtained by three approaches: Lame relationships, FEM without considering assembly method, FEM with considering press fitting process are analyzed and compared. The adequacy of research carried out is confirmed.
Keywords: Tight Joint, Stress State, Contact Pressure, Press Assembly, Finite Element Method
Cite this paper: Vasilya, S. and Anton, S. (2014) Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting. Modern Mechanical Engineering, 4, 198-206. doi: 10.4236/mme.2014.44019.
References

[1]   Ast, M., Rosle, H. and Schenk, R. (1998) Finite Element Analysis of Shrink-Fit Shaft-Hub Connections. Voith Turbo Antriebstechnik GmbH, 1-15.

[2]   Abramov, I.V., Abramov, A.I., Sinitsyn, A.N. and Sinitsyna, V.V. (2010) Stress-Strain State of Tight Joints under a Bending Moment. Russian Engineering Research, 8, 759-762.
http://dx.doi.org/10.3103/S1068798X10080022

[3]   Abramov, I.V., Abramov, A.I., Sinitsyn, A.N., Sinitsyna, V.V. and Petrov, A.V. (2011) Experimental Plant for Interference Fit Disassembling. 14th International Symposium on Mechatronika, 1-3 June 2011, Trencianske Teplice, 9092.

[4]   Abramov, I.V., Abramov, A.I., Sinitsyn, A.N. and Sinitsyna, V.V. (2011) Theoretical Study of New Methods of Assembly and Disassembly of the Tight Joints. Assembly in Mechanical and Instrument Engineering, 3, 11-15.

[5]   Abramov, I.V., Abramov, A.I., Sinitsyn, A.N. and Sinitsyna, V.V. (2014) Mechanical Assembly Method Influence on Tight Joint Parts Stress State. Mechanical Engineering Bulletin, 10.

[6]   Chenyatskiy, A.V., Sinitsyn, A.N. and Sinitsyna, V.V (2014) Approaches to Stress State Calculation of the Mechanically Assembled Tight Joint Parts. Bulletin of the Izhevsk State Technical University, 3.

 
 
Top