JSIP  Vol.5 No.4 , November 2014
Adaptive Control of DC-DC Converter Using Simulated Annealing Optimization Method
Abstract: The purpose of this paper is to present a new adaptive control method used to adjust the output voltage and current of DC-DC (DC: Direct Current) power converter under different sudden changes in load. The controller is a PID controller (Proportional, Integrator, and Differentiator). The gains of the PID controller (KP, KI and KD) tuned using Simulated Annealing (SA) algorithm which is part of Generic Probabilistic Metaheuristic family. The new control system is expected to have a fast transient response feature, with less undershoot of the output voltage and less overshoot of the reactor current. Pulse Width Modulation (PWM) will be utilized to switch the power electronic devices.
Cite this paper: Alqudah, A. , Malkawi, A. and Alwadie, A. (2014) Adaptive Control of DC-DC Converter Using Simulated Annealing Optimization Method. Journal of Signal and Information Processing, 5, 198-207. doi: 10.4236/jsip.2014.54021.

[1]   Schimpfle, C.V. and Kirchner, J. (2003) A Step-Down Conversion Concept for a PWM-mode Boost Converter. IEEE Power Electronics, 963-968.

[2]   Kirkpatrick, S., Gelatt Jr., C.D. and Vecchi, M.P. (1983) Optimization by Simulated Annealing. Science, 220, 671-680.

[3]   Samosir, A.S. and Yatim, A.H.M. (2008) Implementation of New Control Method Based on Dynamic Evolution Control with Linear Evolution Path for Boost Dc-Dc Converter. IEEE Power and Energy, 213-218.

[4]   Wang, X.F., Wu, M., Ouyang, L.Y. and Tang, Q.S. (2008) The Application of GA-PID Control Algorithm to DC-DC Converter. IEEE Control, 3492-3496.

[5]   Kanaan, H.Y., Al-Haddad, K., Georges, S. and Mougharbel, I. (2011) Design, Modelling, Control and Simulation of a Threephase DC-DC Converter for High Currents Applications. IEEE Power Electronics, 424-434.

[6]   Lin, B.-R. (1993) Analysis of Fuzzy Control Method Applied to DC-DC Converter Control. IEEE Power Electron, 22-28.

[7]   Garofalo, F., Marino, P., Scala, S. and Vasca, F. (1994) Control of DC-DC Converters with Linear Optimal Feedback and Nonlinear Feedforward. IEEE Power Electronics, 607-615.

[8]   Zhang, Y.C. and Hu, Y.M. (2008) On PID Controllers Based on Simulated Annealing Algorithm. Chinese Control Conference, 225-228.

[9]   Jeong, G.-J., Kim, I.-H. and Son, Y.-I. (2009) An Adaptive Controller for a DC-DC Boost Converter Considering Load Variation and Coil Magnetic Saturation. APAP Power Electronics, 1-6.

[10]   Rashid, M.H. (2011) Power Electronics Handbook. Elsevier Inc., USA.

[11]   Kim, Y. and Kim, H. (1990) A Stepwise-Overlapped Parallel Simulated Annealing Algorithm, Integration. The VLSI Journal, 10, 39-54.

[12]   Corana, A., Marchesi, M., Martini, C. and Ridella, S. (1987) Minimizing Multimodal Functions of Continuous Variables with the Simulated Annealing Algorithm. ACM Transactions on Mathematical Software, 262-280.

[13]   Malkawi, A. (2012) Adaptive Control of the DC-DC Converter Using Simulated Annealing Optimization Method. M.Sc. Thesis, Yarmouk University, Irbid.