JTTs  Vol.4 No.4 , October 2014
Reconstruction of Car-Electric Bicycle Side Collision Based on PC-Crash
Abstract: A collision model, an automobile model and a multi-rigid-body model in PC-crash are analyzed. By simulating a side collision accident between a car and an electric bicycle (EB), a method that reproduces the car-electric bicycle side collision accident based on PC-crash is presented according to some important information such as the final position, the contacting location between the cyclist and the car. A result is obtained by comparing with the reproduced result, the deformation of accident vehicle and the surveillance video. The rollover direction and fells-over sliding direction after the collision and the contacting location and wrap motion of cyclist and electric bicycle are fitting in with the real situation better compared with the reconstruction result in PC-crash. Then the responsive-surface method and MONTEKARLO method are used in MATLAB to analyze the uncertainty of the vehicle speed in reproduced scene results. And the range of values of the pre-collision speed is obtained which makes the reproduced result more objective and convincible that could provide the basis of the accident assessment.
Cite this paper: Wang, S. , Qian, Y. and Qu, X. (2014) Reconstruction of Car-Electric Bicycle Side Collision Based on PC-Crash. Journal of Transportation Technologies, 4, 355-364. doi: 10.4236/jtts.2014.44032.

[1]   Wang, M.L. (2010) Safety Analysis of Electric Bicycle on Urban Road. Southwest Jiaotong University, Chengdu.

[2]   Yuan, Q. and Li, Y.B. (2002) Review and Trend of the Technology of Vehicle Crash Reconstruction. Journal of Highway and Transportation Research and Development, 2, 122-125.

[3]   Moser, A., Steffan, H., et al. (1999) The Pedestrian Model in PC-Crash—The Introduction of a Multi Body System and Its Validation. SAE Paper, 794-802.

[4]   Zou, T.F., Yu, Z. and Chai, M. (2010) Study on Laws of Vehicle-Pedestrian Accident Simulation Based on Pc-Crash Software. Journal of China Safety Science, 2, 54-58.

[5]   Lin, Q.F. and Xu, H.G. (2007) Simulation Model for High Speed Car-Pedestrian Collision Based on PC-Crash. Automotive Engineering, 7, 562-565.

[6]   Zou, T.F., Yu, Z., Chai, M. and Liu, J.K. (2011) Car-Pedestrian Accident Reconstruction Based on Pc-Crash. Journal of Vibration and Shock, 3, 215-219.

[7]   Wang, G.L., Lu, Y. and Zou, K.K. (2008) Study of Simulation of Vehicle-Pedestrian Collision Accident. Tractor and Farm Transporter, 1, 30-31.

[8]   Steffan, H. (2006) Pc-Crash Technical Manual Version 7.3. Dr. Steffan Datentechnik GmbH, Linz.

[9]   Guo, L. (2008) Simulation Research on Collision Accidents between Vehicle and Two-Wheelers and Its Application. Shanghai Jiao Tong University, Shanghai.

[10]   Moser, A., Steffan, H., et al. (2000) Validation of the Pc-Crash Pedestrian Model. SAE Paper, 1336-1339.

[11]   Zou, T.F., Yu, Z., Chai, M., et al. (2010) Application of Response Surface Method to Uncertainty Analysis on Accident Reconstruction Results. Automotive Engineering, 32, 116-118.

[12]   Wang, H.Y. and Shao, W.Y. (2009) Error Analysis of Traffic Accident Reconstruction Based on PC-Crash. Journal of Tongji University (Natural Science), 4, 531-536.

[13]   Zou, T.F., Chai, M., Liu, J.K. and Li, Y.L. (2013) Method for Analyzing Uncertainty of Simulation Results in Accident Reconstruction. Journal of System Simulation, 5, 911-914.

[14]   Zou, T.F. and Zhao, L.X. (2013) A Method for Estimating Sample Size of Monte Carlo Method in Accident Reconstruction. Journal of China Safety Science, 5, 22-26.