ACES  Vol.4 No.4 , October 2014
Thermodynamic Study for Arsenic Removal from Freshwater by Using Electrocoagulation Process
Abstract: Insert Industrial treatment of mineral-processing and non-ferrous metal-smelting acid wastewater effluents is becoming an enormous worldwide problem. In Mexico, heavy metalscontaminated natural waters, including freshwater, surface water and ground water, are a significant problem as some of these compounds are known as toxic, mutagenic, and carcinogenic. A very promising electrochemical treatment technique that does not require chemical additions to remove arsenic is electrocoagulation (EC) with air injection. The proposed electrochemical process is efficient because used low cost iron electrodes and promising in industrial application. Theoretical the purpose of this research was to investigate the thermodynamic of arsenic adsorption on iron species using the Langmuir’s Isotherm. Also, thermodynamic parameters such as , and were calculated and the adsorption process was found to be exothermic and spontaneous. X-ray Diffraction and Scanning Electron Microscopy, were used to characterize the solid products formed during EC. The results of this study suggest that magnetite particles and amorphous iron oxyhydroxides are present in the examined EC products and this study indicate that arsenic can be successfully adsorbed on iron species by electrocoagulation process. Field pilot-scale study demonstrated the removal of As(III)/As(V) with an efficiency of more than 99% from both wastewater and wells.
Cite this paper: Parga, J. , Valenzuela, J. , Munive, G. , Vazquez, V. and Rodriguez, M. (2014) Thermodynamic Study for Arsenic Removal from Freshwater by Using Electrocoagulation Process. Advances in Chemical Engineering and Science, 4, 548-556. doi: 10.4236/aces.2014.44056.

[1]   Gomes, J.A., Cocke, D.L., Daida, P., Kesmez, M., Weir, M., Moreno, H., Parga, J.R., Irwin, G., McWhinney, H., Gradyand, T. and Peterson, E. (2007) Arsenic Removal by Electrocoagulation Using Combined Al-Fe Electrode System and Characterization of Products. Journal of Hazardous Material, B139, 220-231.

[2]   Parga, J.R., Cocke, D.L., Valenzuela, J.L., Gomes, J.A., Kesmez, M., Irwin, G., Moreno, H. and Weir, M. (2005) Arsenic Removal via Electrocoagulation from Heavy Metal Contaminated Groundwater in La Comarca Lagunera Mexico. Journal of Hazardous Materials, B124, 247-254.

[3]   Mohora, E., Roncevic, S., Agbaba, J., Tubic, A. and Mitic, M. (2014) Removal of Arsenic from Groundwater Rich in Natural Organic Matter (NOM) by Continuous Electrocoagulation/Flocculation (ECF), Separation and Purification Technology, Available online 16 September 2014.

[4]   Moreno, H., Cocke, D.L., Gomes, J.A., Morkovsky, P., Parga, J.R., Peterson, E. and Garcia, C. (2007) Electrochemical Generation of Green Rust with Electrocoagulation. ECS Transactions, 3, 67-76.

[5]   Parga, J.R., Vazquez, V. and Casillas, H. (2009) Cyanide Detoxification of Mining Wastewaters with TiO2 Nanoparticles and Its Recovery by Electrocoagulation. Chemical Engineering and Technology, 32, 1901-1908.

[6]   Roy, P., Mondale, N.K. and Das, K. (2014) Modeling of the Adsorptive removal of Arsenic: A Statistical Approach. Journal of Environmental Chemical Engineering, 2, 585-597.

[7]   Mólgoraa, C.C., Domíngueza, A.M., Avilab, E.M., Droguic, P. and Buelnad, G. (2013) Removal of Arsenic from drinkingwater: A Comparative Study between Electrocoagulation-Micrifiltration and Chemical Coagulation-Microfiltration Process. Separation and Purification Technology, 118, 645-651.

[8]   Zhang, P., Tong, M., Young, S. and Liao, P. (2014) Transformation and Removal of Arsenic in Groundwater by Sequential Anodic Oxidation and Electrocoagulation. Journal of Contaminant Hydrology, 164, 299-307.

[9]   Nauer, G., Stretcha, P., Brinda-Konopik, N. and Liptay, G. (1985) Spectroscopic and Thermoanalytical Characterization of Standard Substances for the Identification of Reaction Products on Iron Electrodes. Journal of Thermal Analysis, 30, 813-830.

[10]   Nasrazadan, S. and Raman, A. (1993) The Application of Infrared Spectroscopy to the Study of Rust Systems—II. Study of Cation Deficiency in Magnetite (Fe3O4) Produced during Its Transformation to Maghemite (γ-Fe2O3) and Hematite (α-Fe2O3). Corrosion Science, 34, 1355-1365.

[11]   Parfitt, R.L. and Smart, R. (1978) The Mechanism of Sulfate Adsorption on Iron Oxides1. Soil Science Society of American Jornal, 42, 48.

[12]   Weckler, B. and Lutz, H.D. (1998) Lattice Vibration Spectra. Part XCV. Infrared Spectroscopic Studies on the Iron Oxide Hydroxides Goethite (α), Akaganéite (β), Lepidocrocite (γ) and Feroxyhite (δ). European Journal of Solid State and Inorganic Chemistry, 35, 531-544.

[13]   Misawa, T., Kyuno, T., Suëtaka, W. and Shimodaira, S. (1971) The Mechanism of Atmospheric Rusting and the Effect of Cu and P on the Rust Formation of Low Alloy Steels. Corrosion Science, 11, 35-48.

[14]   Music, S., Gotic, M. and Popovic, S. (1993) X-Ray Diffraction and Fourier Transform-Infrared Analysis of the Rust Formed by Corrosion of Steel in Aqueous Solutions. Journal of Materials Science, 28, 5744-5752.

[15]   Nyquist, R.A. and Kagel, R.O. (1971) Infrared Spectra of Inorganic Compounds (3800-450 cm-1), 218. Academic Press, New York and London.