OJMSi  Vol.2 No.4 , October 2014
Design and Movement Simulation to the Cam of the Testing Device for Capacitor Encapsulation Equipment
ABSTRACT
In this paper, in order to design a cam mechanism be up to the mustard, a set of methods are put forward that using the Visual Basic programming language based on solidworks to draw cam contour line and then get its 3D models and generate the cam motion simulation by the solidworks motion. In the end, it’s proved that the cam designed though this method met the requirement.

Cite this paper
Fang, H. , Zhang, G. and Jian, J. (2014) Design and Movement Simulation to the Cam of the Testing Device for Capacitor Encapsulation Equipment. Open Journal of Modelling and Simulation, 2, 138-143. doi: 10.4236/ojmsi.2014.24015.
References
[1]   Guo, L.F. and Guo, S.S. (2005) The Design of CAM Contour and Simulation. Mechanical Research and Application, 19, 95-97.

[2]   Heng, S. and Chen, Z.M. (2006) Theory of Machines and Mechanisms. Higher Education Press, Beijing, 151-168.

[3]   Chen, H.S. (1999) Visual Basic Programming Tutorial. Suzhou University Press, Suzhou.

[4]   Zhang, Q.L. (2005) Direct Computer Aided Design of Disk CAM Mechanism with Push Rod Past. Changsha Aviation Occupation Technical College Journals.

[5]   Wang, D. and Li, C. (2003) Self-Adaptive Dynamic Matrix Control for High-Speed Machining Servo Control. International Journal of Advanced Manufacturing Technology, 10-11.

[6]   Jaganathan, A. and Lin, Y.J. (2013) Accurate Machining of Freeform Surfaces by Restraining Cutter Contouring Errors. International Journal of Advanced Manufacturing Technology, 9.

[7]   Muftik, A.L. and Khan, A.S. (2012) Performance Evaluation of Yanmar Paddy Transplanter in Pakistan. Agricultural Mechanization in Asia.

[8]   Ying, Y.B. and Zhao, Y. (1997) Research in Dynamic Simulation of Sparating-Pianting Mechanism of Rice Transplanter. Agricultural Mechanization in Asia.

[9]   Solidworks Corporation (2004) Solidworks 2004 User Guide.

[10]   Myung, S. and Han, S. (2011) Knowledge-Based Parametric Design of Mechanical Products Based on Configuration Design Method.

[11]   Lin, B.-T. and Kuo, C.-C. (2011) Application of an Integrated CAD/CAE/CAM System for Stamping Dies for Automobiles. The International Journal of Advanced Manufacturing Technology, 9-10.

 
 
Top