MSA  Vol.5 No.12 , October 2014
The Study of Green Compression Strength of a Green Sand Mould Using Statistical Approach
ABSTRACT
The study of green compression strength of a green sand mould using statistical approach has been undertaken. Empirically generated data in National Metallurgical Development Centre, Jos Sand Testing Laboratory were used for the study. Coefficient of correlation, coefficients of determination and coefficient of multiple determinations were used to explain the relationship existing between the two independent variables of clay and moisture content and green compression strength, the dependent variable. The study showed that the coefficient of determination for Ys: X1 was 0.88 while the coefficient of correlation was 0.94, coefficient of determination for Ys: X2 was 0.90 while the coefficient of correlation was 0.95 and the coefficient of multiple determination was 0.72; these coefficients assisted tremendously in the study of green compression strength. A mathematical model was developed for the prediction of green compression strength; it was tested and proved to be a good estimation tool for estimating green compression strength values on the foundry shop floor. The study has clearly shown that statistical approach is a good tool for studying green compression strength of green sand moulds.

Cite this paper
Ihom, A. and Offiong, A. (2014) The Study of Green Compression Strength of a Green Sand Mould Using Statistical Approach. Materials Sciences and Applications, 5, 876-882. doi: 10.4236/msa.2014.512089.
References
[1]   Jain, R.K. (2009) Production Technology. 16th Edition, Khana Publishers, Nai Sarak, 153-158.

[2]   Ihom, A.P. (2012) Foundry Raw Materials for Sand Casting and Testing Procedures. A2P2 Transcendent Publishers, Jos, 71-92.

[3]   Khanna, O.P. (2008) A Text Book of Material Science and Metallurgy. 8th Reprint, Dhanpat Rai Publications, New Delhi, 51-8-10.

[4]   Ihom, A.P., Agunsoye, J., Anbua, E.E. and Bam, A. (2009) The Use of Statistical Approach for Modeling and Studying the Effect of Ramming on the Mould Parameters of Yola Natural Sand. Nigerian Journal of Engineering, 16, 186-192.

[5]   Brown, J.R. (1994) Foseco Foundryman’s Handbook. 10th Edition, Pergamon Press PLC, Oxford, 10-68.

[6]   Heine, R.W., Loper Jr., C.R. and Rosenthal, P.C. (1967) Principles of Metal Casting. 2nd Edition, Tata Mcgraw-Hill Publishing Company Ltd, New Delhi, 100-150.

[7]   Zrimsek, A.H. and Vingas, G.J. (1961) Effect of Moulding Variables Parameters on the Properties of Clay Bonded Sands. Modern Casting, 39, 85.

[8]   Lucey, T. (2000) Quantitative Techniques. 7th Edition, Low Priced Edition Funded by the British Government, 99150.

[9]   Chakoraborty, M. and Dhindaw, B.K. (1979) Utilization of Regression Equations in Optimization of Properties of Clay Bonded Sands. Proceedings of the 41st International Foundry Congress, Liege, 8.

[10]   Chakoraborty, M. and Dhindaw, B.K. (1985) Application of the Statistical Design of Experiments in the Study of Clay-bonded Sand Mixtures, the British Foundryman. Journal of the Institute of the British Foundrymen, 114-118.

[11]   Ihom, A.P., Yaro, S.A. and Aigbodion, V.S. (2006) Application of Multiple Regression-Model to the Study of Foundry Clay-Bonded Sand Mixtures. JICCOTECH, 2, 161-168.

[12]   Eckey, D.C. and Goldress, J.E. (1989) The Design of Experiments in the Sand Casting Foundry. Transactions of the American Foundryman Society, 62, 605.

[13]   Ihom, A.P., Agunsoye, J, Anbua, E.E. and Ogbodo, J. (2011) Effect of Moisture Content on the Foundry Properties of Yola Natural Sand. Leonardo Electronic Journal of Practices and Technologies, 19, 85-96.

[14]   Ihom, A.P., Suleiman, U.M. and Nyior, G.B. (2012) Impact of Swelling Indices of Sokoto Clays on the Moulding Properties of the Clays in Sand Mixtures. Journal of Minerals and Materials Characterization and Engineering, 11, 1050-1054.

 
 
Top