JSEMAT  Vol.4 No.6 , October 2014
Surface Modification of Parts Material Shape Memory TiNiCo with a View to Providing a Functional and Mechanical Property as a Factor in Resource
ABSTRACT
The paper presents a complex method of forming the surface-modified layers of materials with shape memory effect, including high-speed flame spraying of powders based on TiNiCo; subsequent thermal and thermomechanical treatment allows the formation of surface layers of nano-sized state that have a high level of functional, mechanical and performance properties; it is shown that the complex processing with a layer of TiNiCo allows a reduction of the porosity of the coatings and increases the strength of the coating’s adhesion to the substrate. It is found that, after treatment with high-speed flame spraying powder shape memory TiNiCo, steel has an increase in cycle life by 30% - 40% in a cycle fatigue and 3 - 3.5 times durability. Based on comprehensive research into the metallophysical surface-modified layer, new information is obtained about the nanoscale composition.

Cite this paper
Rusinov, P. and Blednova, Z. (2014) Surface Modification of Parts Material Shape Memory TiNiCo with a View to Providing a Functional and Mechanical Property as a Factor in Resource. Journal of Surface Engineered Materials and Advanced Technology, 4, 348-358. doi: 10.4236/jsemat.2014.46039.
References
[1]   Blednova, Zh.M. and Rusinov, P.O. (2010) Formation of Nanostructured Surface Layers by Plasma Spraying the Mechanoactivated Powders of Alloys with Shape Memory Effect. Nanotechnologies in Russia, 5, 352-363.
http://dx.doi.org/10.1134/S1995078010050101

[2]   Blednova, Zh.M. and Rusinov, P.O. (2013) Formation of Nanostructured Surface Layers from Materials with Shape Memory Effect TiNiCu in Conditions. Materials Science Forum, 738-739, 512-517.
http://dx.doi.org/10.4028/www.scientific.net/MSF.738-739.512

[3]   Blednova, Z.M., Rusinov, P.O. and Stepanenko, M.A. (2013) Superficial Modifying by SME Materials in Engineering Appendices. Materials Science Forum, 738-739, 595-600.
http://dx.doi.org/10.4028/www.scientific.net/MSF.738-739.595

[4]   Blednova, Zh.M. and Rusinov, P.O. (2014) Mechanical and Tribological Properties of the Composition Steel-Nano-structured Surface Layer of a Material with Shape Memory Effect Based TiNiCu. Applied Mechanics and Materials, 592-594, 1325-1330.
http://dx.doi.org/10.4028/www.scientific.net/AMM.592-594.1325

[5]   Blednova, Z.M., Rusinov, P.O. and Stepanenko, M.A. (2014) Influence of Superficial Modification of Steels by Materials with Effect of Memory of the Form on Wear-Fatigue Characteristics at Frictional-Cyclic Loading. Advanced Materials Research, 915-916, 509-514.
http://dx.doi.org/10.4028/www.scientific.net/AMR.915-916.509

[6]   Lekston, Z. and Drugacz, J. (2007) Structure and Properties of NiTi and TiNiCo Shape Memory Wires for Maxillofacial Surgery. 12th International Scientific Conference Achievements in Mechanical and Materials Engineering, 593-596.

[7]   Lekston, Z. and Lagiewka, E. (2007) X-Ray Diffraction Studies of NiTi Shape Memory Alloys. Archives of Materials Science and Engineering, 28, 665-672.

[8]   Khachin, V.N. (1992) Titanium Nikelid. Structure and Properties. Nauka, Moscow.

[9]   Tobushi, H., Kimura, K., Sawada, T., Hattori, T. and Lin, P. (1994) Recovery Stress Associated with R Phase Transformation in TiNi Shape Memory Alloy. JSME International Journal, Series A, 37, 138-142.

[10]   Zel’dovich, V.I., Khomskaya, I.V., Frolova, N.Y., et al. (2001) On the Origin of R Martensite in Titanium Nickelide. FMM, 92, 71-76.

[11]   Khalil-Allafi, J., Dlouhy, A. and Eggeler, G. (2002) Ni4Ti3-Precipitation during Aging of NiTi Shape Memory Alloys and Its Influence on Martensite Phase Transformation. Acta Materialia, 50, 4255-4274.
http://dx.doi.org/10.1016/S1359-6454(02)00257-4

[12]   Karabasova, Y.S., Ed. (2002) New Materials. MISIS, 736s.

 
 
Top