MSA  Vol.5 No.11 , September 2014
Mechanical Behaviour Modelling of an Mg-Stabilized Zirconia Reinforced TRIP-Matrix-Composite under Cold Working Conditions
In the present work, a new method to predict the stress-strain curves for three-phase materials has been developed. It was applied using the example of an Mg-stabilized zirconia reinforced TRIP-matrix-composite. The content of the ceramic phase was varied between 5% and 20%, whereas the particle size of the ceramic was selected to be 30 to 50 μm. The method is a further development of mixture rule for multiphase materials with more than two microstructure components. The prediction results were compared with the original method of mixture rule and with the IsoE-method. It is shown that the new method significantly improves the convergence compared to the standard method for mixture rule, even though it does not reach the accuracy of IsoE-method. Furthermore, there is an improvement of predicted convergence for large values of the total stress. Finally, a working map was designed for a quick graphical definition of the objective functions.

Cite this paper
Guk, S. , Müller, W. , Pranke, K. and Kawalla, R. (2014) Mechanical Behaviour Modelling of an Mg-Stabilized Zirconia Reinforced TRIP-Matrix-Composite under Cold Working Conditions. Materials Sciences and Applications, 5, 812-822. doi: 10.4236/msa.2014.511081.
[1]   Schatt, W. (1991) Einführung in die Werkstoffwissenschaft. 7th Edition, Deutscher Verlag für Grundstoffindustrie, Leipzig.

[2]   Fischmeister, H. and Karlsson, B. (1977) Plastizitatseigenschaften grob-zweiphasiger Werkstoffe. Zeitschrift für Metallkunde, 68, 311-327.

[3]   Tamura, I., Tomota, Y. and Ozawa, M. (1973) Strength and Ductility of Iron-Nickel-Carbon Alloys Composed of Austenite and Martensite with Various Strength. Proceedings of the 3rd International Conference on Strength of Metals and Alloys, Cambridge, 20-25 August 1973, 611-615.

[4]   Karlsson, B. and Linden, G. (1975) Plastic Deformation of Ferrite-Pearlite Structures in Steel. Materials Science and Engineering, 17, 209-219.

[5]   Goel, N.C., Sangal, S. and Tangri, K. (1985) A Theoretical Model for the Flow Behavior of Commercial Dual-Phase Steels Containing Metastable Retained Austenite. Part I: Derivation of Flow Curve Equations. Metallurgical Transactions A, 16, 2013-2021.

[6]   Bouaziz, O. and Buessler, P. (2002) Mechanical Behavior of Multiphase Materials: An Intermediate Mixture Law without Fitting Parameter. La Revue de Metallurgie, 99, 71-77.

[7]   Goureev, D. (2006) Dissertation TU Bergakademie Freiberg.

[8]   Wolf, S., Martin, S., Krüger, L., Martin, U. and Lorenz, U. (2012) Mechanical Behaviour of Deformation-Induced d’-Martensite and Flow Curve Modelling of a Cast CrMnNi TRIP-Steel. Steel Research International, 83, 529-537.

[9]   Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. and van der Zwaag, S. (2003) Micromechanical Damage Simulations of TRIP Steels. Proceedings of the International Conference on Processing & Manufacturing of Advanced Materials, Madrid, 7-11 July 2003, 1355-1361.

[10]   Guk, S., Pranke, K., Müller, W. and Yanina, A. (2014) Development of High-Strength TRIP-Matrix-Composite Materials. Proceedings of the International Conference MEFORM 2014: Production and Processing of Clad Materials and Metal Matrix Composites, Altenberg, 26-27 March 2014, 149-159.

[11]   Narayanasamy, R. and Pandey, K.S. (1998) Some Aspects of Work Hardening in Sintered Aluminium-Iron Composite Preforms during Cold Axial Forming. Journal of Materials Processing Technology, 84, 136-142.