Cite this paper
Makaka, G. (2014) Influence of Fly Ash on Brick Properties and the Impact of Fly Ash Brick Walls on the Indoor Thermal Comfort for Passive Solar Energy Efficient House. Computational Water, Energy, and Environmental Engineering
, 152-161. doi: 10.4236/cweee.2014.34016
 Givoni, B. (1998) Effectiveness of Mass and Night Ventilation in Lowering the Indoor Daytime Temperatures. Energy and Buildings, 28, 25-32. http://dx.doi.org/10.1016/S0378-7788(97)00056-X
 South Africa Building Manual, 2005.
 Dondi, M., et al. (2002) Orimulsion Fly Ash in Clay Bricks—Part 2: Technical Behaviour of Clay/Ash Mixtures. European Ceramics Society, 22, 1737-1747. http://dx.doi.org/10.1016/S0955-2219(01)00494-0
 Smith, M.W., et al. (2001) Thermal Performance Analysis of a High-Mass Residential Building. National Renewable energy Laboratory.
 Adam, A.A. (2009) Strength and Durability Properties of Alkali Activated Slag and Fly Ash-Based Geopolymer Concrete. Ph.D. Thesis, RMIT University, Melbourne.
 Yoshitoshi, S., et al. (2009) Measurement of Thermal Conductivity of Magnesia Brick with Straight Brick Specimens by Hot Wire Method. Materials Transactions, 50, 2623-2630. http://dx.doi.org/10.2320/matertrans.M2009098
 Pel, L. (1995) Moisture Transport in Porous Building Materials. Ph.D. Thesis, Eindhoven University of Technology, Eindhoven.