Back
 JCC  Vol.2 No.11 , September 2014
Dynamic Characteristics of Selemion CMV-Based IPMC Actuators in High Humidity Environment
Abstract: Electrically-induced bending of Selemion IPMC is caused by the charge induced into the IPMC. This induced charge quantity is susceptible to the absolute humidity of environment. There are two types of charges, the charge causing bending and the rest of charge that causes no bending. In the high humidity environments, where absolute humidity is above 10 gm-3, the quantity of charge causing no bending accounts for the large part of whole charge induced into the Selemion IPMC, while quantity of such charge is negligibly small at the absolute humidity of less than 10 gm-3. Estimating the quantity of those two types of charges individually, we successively analyzed the bending stability of Selemion IPMC at the absolute humidity above 10 gm-3. Consequently, we deduced the following conclusions. 1) There exists a large time delay in the current in response to the voltage input, 2) Current is highly dumping, and 3) Bending behavior is marginally stable under the input of any frequency.
Cite this paper: Ngetha, H. , Sasaki, M. , Tamagawa, H. , Ito, S. and Ikeda, K. (2014) Dynamic Characteristics of Selemion CMV-Based IPMC Actuators in High Humidity Environment. Journal of Computer and Communications, 2, 45-52. doi: 10.4236/jcc.2014.211006.
References

[1]   Tamagawa, H. and Nogata, F. (2004) Bending Response of Dehydrated Ion Exchange Polymer Membrane to the Applied Voltage. Journal of Membrane Science, 243, 229-234. http://dx.doi.org/10.1016/j.memsci.2004.06.024

[2]   Onouchi, Y., Sasaki, M. and Tamagawa, H. (2009) Current-Controlled Selemion Bending in the Controlled Humidity Environment. Sensors and Actuators B: Chemical, 135, 465-471. http://dx.doi.org/10.1016/j.snb.2008.10.025

[3]   Ikeda, K., Sasaki, M. and Tamagawa, H. (2014) IPMC Bending Predicted by the Circuit and Viscoelastic Models Considering Individual Influence of Faradaic and Non-Faradaic Currents on the Bending. Sensors and Actuators B: Chemical, 190, 954-967. http://dx.doi.org/10.1016/j.snb.2013.09.016

[4]   Porfiri, M. (2008) Charge Dynamics in Ionic Polymer Metal Composites. Journal of Applied Physics, 104, Article ID: 104915. http://dx.doi.org/10.1063/1.3017467

[5]   Branco, P.J.C. and Dente, J.A. (2006) Derivation of a Continuum Model and Its Electric Equivalent-Circuit Representation for Ionic Polymer-Metal Composite (IPMC). Electromechanics, Smart Materials and Structures, 15, 378. http://dx.doi.org/10.1088/0964-1726/15/2/019

[6]   Farinholt, K. and Donald, J.L. (2004) Modeling of Electromechanical Charge Sensing in Ionic Polymer Transducers. Mechanics of Materials, 36, 421-433. http://dx.doi.org/10.1016/S0167-6636(03)00069-3

[7]   Ikeda, K., Sasaki, M. and Tamagawa, H. Rotational Trajectory Formation of Curvature vs. Charge Relationship by Selemion CMV-Based IPMC. To be submitted.

[8]   Ngetha, H., Sasaki, M., Tamagawa, H., Ikeda, K. and Ito, S. (2013) A Stabilized Control Lability of Selemion CMV-Based IPMC Actuators in the Extremely Low Humidity Environment. Proceedings of the 22nd Annual International Conference of MAGDA, Miyazaki, Japan, 2-3 December 2013, 555-560.

 
 
Top