Cite this paper
Pham, C. , From, P. and Gravdahl, J. (2014) A Geometric Approach to the Design of Serial and Parallel Manipulators with Passive Joints. Applied Mathematics
, 2585-2601. doi: 10.4236/am.2014.516247
 Matone, R. and Roth, B. (1999) In-Parallel Manipulators: A Framework on How to Model Actuation Schemes and a Study of Their Effects on Singular Postures. Transaction of ASME, 121, 2-8.
 Liu, Y.H., Xu, Y. and Bergerman, M. (1999) Cooperation Control of Multiple Manipulators with Passive Joints. IEEE Transactions on Robotics and Automation, 15, 258-267. http://dx.doi.org/10.1109/70.760347
 Bicchi, A. and Prattichizzo, D. (2000) Manipulability of Cooperating Robots with Unactuated Joints and Closed-Chain Mechanisms. IEEE Transaction of Robotics and Automation, 16, 336-345. http://dx.doi.org/10.1109/70.864226
 Murray, R.M., Li, Z. and Sastry, S.S. (1994) A Mathematical Introduction to Robotic Manipulation. CRC Press, Boca Raton.
 Dai, J.S., Huang, Z. and Lipkin, H. (2006) Mobility of Overconstrained Parallel Mechanisms. Transactions of ASME, 128, 220-229.
 Rico, J.M., Gallardo, J. and Ravani, B. (2003) Lie Algebra and the Mobility of Kinematic Chains. Journal of Robotic Systems, 20, 477-499. http://dx.doi.org/10.1002/rob.10099
 Rico, J.M., Aguilera, L.D., Gallardo, J., Rodriguez, R., Orozco, H. and Barrera, J.M. (2006) A More General Mobility Criterion for Parallel Mechanisms. Journal of Mechanical Design, 128, 207-219. http://dx.doi.org/10.1115/1.2118687
 English, J.D. and Maciejewski, A.A. (1998) Fault Tolerance for Kinematically Redundant Manipulators: Anticipating Free-Swinging Joint Failures. IEEE Transactions of Robotics and Automation, 14, 566-575.
 Tinos, R. and Terra, M.H. (2002) Control of Cooperative Manipulators with Passive Joints. American Control Conference, Anchorage, 1129-1134.
 Tinós, R., Terra, M.H. and Bergerman, M. (2007) A Fault Tolerance Framework for Cooperative Robotic Manipulators. Control Engineering Practice, 15, 615-625. http://dx.doi.org/10.1016/j.conengprac.2006.10.018
 Oriolo, G. and Nakamura, Y. (1991) Free-Joint Manipulators: Motion Control under Second-Order Nonholonomic Constraints. Proceedings of IEEE International Workshop on Intelligent Robots and Systems, Osaka, 3-5 November 1991, 1248-1253. http://dx.doi.org/10.1109/IROS.1991.174671
 Arai, H. and Tachi, S. (1990) Dynamic Control of a Manipulator with Passive Joints-Position Control Experiments by a Prototype Manipulator. IEEE/RSJ International Conference on Intelligent Robots and Systems, Ibaraki, 3-6 July 1990, 935-940.
 Hauser, J. and Murray, R.M. (1990) Nonlinear Controllers for Non-Integrable Systems: The Acrobat Example. American Control Conference, San Diego, 23-25 May 1990, 669-671.
 From, P.J. and Gravdahl, J.T. (2008) On the Mobility and Fault Tolerance of Closed Chain Manipulators with Passive Joints. Modeling, Identification and Control, 29, 151-165. http://dx.doi.org/10.4173/mic.2008.4.3
 Meng, J., Liu, G. and Li, Z. (2007) A Geometric Theory for Analysis and Synthesis of Sub-6 DoF Parallel Manipulators. IEEE Transactions on Robotics, 23, 625-649. http://dx.doi.org/10.1109/TRO.2007.898995
 From, P.J., Pettersen, K.Y. and Gravdahl, J.T. (2014) Vehicle-Manipulator Systems: Modeling for Simulation, Analysis, and Control. Springer Verlag, London. http://dx.doi.org/10.1007/978-1-4471-5463-1
 From, P.J., Gravdahl, J.T. and Abbeel, P. (2010) On the Influence of Ship Motion Prediction Accuracy on Motion Planning and Control of Robotic Manipulators on Seaborne Platforms. Proceedings of International Conference of Robotics and Automation, Anchorage, 3-7 May 2010, 5281-5288.