Back
 EPE  Vol.3 No.2 , May 2011
A New Structure of Multilevel Inverter with Reduced Number of Switches for Electric Vehicle Applications
Abstract: Both Hybrid Electric Vehicles (HEVs) and Electric Vehicles (EVs) need a traction motor and a power in-verter to drive the traction motor. The requirements for the power inverter include high peak power, opti-mum consumption of energy, low output harmonics and inexpensive circuit. In this paper, a new structure of multilevel inverter with reduced number of switches is proposed for electric vehicle applications. It consists of an H-bridge and an inverter in each phase which produces multilevel voltage by switching the dc voltage sources in series. As the number of switches are reduced, both conduction and switching losses will be de-creased, which leads to increase the efficiency of converter. The size and power consumption of driving cir-cuits are also reduced. The proposed three phase inverter can produces more number of voltage levels in the same number of the voltage source and reduced number of switches compared to the conventional inverters. This structure minimizes the total harmonic distortion (THD) of the output voltage waveforms. The structure of proposed multilevel inverter, modulation method, switching losses, THD calculation and simulation re-sults with PSCAD/EMTDC software are shown in this paper.
Cite this paper: nullM. Ebadpour, M. Sharifian and S. Hosseini, "A New Structure of Multilevel Inverter with Reduced Number of Switches for Electric Vehicle Applications," Energy and Power Engineering, Vol. 3 No. 2, 2011, pp. 198-205. doi: 10.4236/epe.2011.32026.
References

[1]   A. Chen and X. He, “Research on Hybrid-Clamped Multilevel-Inverter Topologies,” IEEE Transaction on Industrial Electronics, Vol. 53, No. 6, 2006, pp. 1898-1907. doi:10.1109/TIE.2006.885154

[2]   A. bendre, G. Venkataramanan, D. Rosene, and V. Srinivasan, “Modeling and Design of a Neutral-Point Voltage Regulator for a Three-Level Diode-Clamped Inverter Using Multiple-Carrier Modulation,” IEEE Transaction on Industrial Electronics, Vol. 53, No. 3, 2006, pp. 718-726. doi:10.1109/TIE.2006.874424

[3]   Y. Cheng, C. Qian, M. L. Crow, S. Pekarek, and S. Atcitty, “A Comparison of Diode-Clamped and Cascade Multilevel Converters for a STATCOM with Energy Storage,” IEEE Transaction on Industrial Electronics, Vol. 53, No. 5, 2006, pp. 1512-1521. doi:10.1109/TIE.2006.882022

[4]   X. Kou, K. A. Corzine and Y. L. Familiant, “A Unique Fault-Tolerant Design for Flying Capacitor Multilevel Inverter,” IEEE Transaction on Power Electronics, Vol.19, No.4, 2004, pp. 979-987. doi:10.1109/TPEL.2004.830037

[5]   J. Zhang, Y. Zou, X. Zhang and K. Ding, “Study on a Modified Multilevel Cascade Inverter with Hybrid Modulation,” Fourth International Conference on Power Electronics and Drive System, Bali, 22-25 October 2001, pp.379-383. doi:10.1109/PEDS.2001.975343

[6]   A. J. Watson, P. W. Wheeler, and J. C. Clare, “A Complete Harmonic Elimination Approach to DC Link Voltage Balancing for a Cascade Multilevel Rectifier,” IEEE Transaction on Industrial Electronics, Vol. 54, No. 6, 2007, pp. 2946-2953. doi:10.1109/TIE.2007.906993

[7]   P. W. Hammond, “A New Approach to Enhance Power Quality for Medium Voltage AC Drives,” IEEE Transaction on Industry Applications, Vol. 33, No. 1, 1997, pp. 202-208. doi:10.1109/28.567113

[8]   M. Malinowski, K. Gopakumar, J. Rodriguez and M. Perez, “A Survey on Cascade Multilevel Inverters,” IEEE Transaction on Industrial Electronics, Vol. 57, No. 7, 2009, pp. 2197-2206. doi:10.1109/TIE.2009.2030767

[9]   L. M. Tolbert, F. Z. Peng, T. Cunnyngham and J. N. Chiasson, “Charge Balance Control Schemes for Cascade Multilevel Converter in Hybrid Electric Vehicles,” IEEE Transaction on Industrial Electronics, Vol. 49, No. 5, 2002, pp. 1058-1064. doi:10.1109/TIE.2002.803213

[10]   A. Emadi, S. S. Williamson and A. Khaligh, “Power Electronics Intensive Solution for Advanced Electric, Hybrid Electric, and Fuel Cell Vehicular Power Systems,” IEEE Transaction on Power Electronics, Vol. 21, No. 3, 2006, pp. 567-577. doi:10.1109/TPEL.2006.872378

[11]   J. Dixon, J. Pereda, C. Castillo and S. Bosch, “Asymmetrical Multilevel Inverter for Traction Drives Using Only One DC Supply,” IEEE Transaction on Vehicular Technology, Vol. 59, No. 8, 2010, pp. 3736-3743. doi:10.1109/TVT.2010.2057268

[12]   T. T. song, H. S. H. Chung and A. Ioinovici, “A High-Voltage DC-DC Converter with Vin/3 — Voltage Stress on the Primary Switches,” IEEE Transaction on Power Electronics, Vol. 22, No. 6, 2007, pp. 2124-2137. doi:10.1109/TPEL.2007.909227

[13]   Y. Hinago and H. Koizumi, “A Single Phase Multilevel Inverter Using Switched Series/Parallel DC Voltage Sources,” IEEE Transaction on Industrial Electronics, Vol. 57, No. 8, Aug. 2010, pp. 2643-2650. doi:10.1109/TIE.2009.2030204

[14]   H. Liu, L. M. Tolbert, S. Khomfoi, B. Ozpineci and Z. Du, “Hybrid Cascade Multilevel Inverter with PWM Control Method,” Proceedings of IEEE Power Electronics Specialists Conference, Rhodes, 15-19 June 2008, pp. 162-166. doi:10.1109/PESC.2008.4591918

[15]   O. C. Mak and A. Ioinovici, “Switched-Capacitor Inverter with High Power Density and Enhanced Regulation Capability,” IEEE Transactions on Circuits and Systems, TCAS-1, Vol. 45, No. 4, 1998, pp. 336-347. doi:10.1109/81.669056

 
 
Top