MSA  Vol.5 No.10 , August 2014
UV/O3 Preirradiated Cotton Fabric-Containing Chitosan for Effective Removal of Heavy Metals
ABSTRACT
The present work aims at studying the effect of Ultra-Violet/Ozone (UV/O3) irradiation of cotton fabrics on their interaction with chitosan/citric acid based formulation and, the onset of this on the ability of treated fabrics to remove heavy metal ions from their aqueous solutions. To achieve the goal, the cotton fabrics were preirradiated for 90 minutes using UV/O3 as radiation source. The irradiated and the unirrdadiated cotton fabrics were submitted to finishing formulation consisting essentially of chitosan as a finishing agent and citric acid as crosslinking agent in combination with sodium hypophosphite (SHP) as a catalyst. Finishing formulation containing different concentrations of chitosan (0 - 4) along with citric acid (8 g/l) and SHP (4 g/l) were used and the interaction of chitosan with the cotton fabric was assessed through nitrogen measurement. The preirradiated and chemically finished fabrics vis-à-vis the unirrdadiated fabrics were examined for metal ion removal. Results conclude that the preirradiated cotton fabrics exhibit higher nitrogen content than the unirrdadiated fabrics. The same holds true for heavy metal removal, exemplified by Zn2+ and Cd2+ ions from their aqueous solutions. That is, preirradiated fabrics containing chitosan display higher percent heavy metal removal than their unirrdadiated mates.

Cite this paper
Hebeish, A. , Elnagar, K. , Helal, M. , Ragab, M. and Shaaban, M. (2014) UV/O3 Preirradiated Cotton Fabric-Containing Chitosan for Effective Removal of Heavy Metals. Materials Sciences and Applications, 5, 698-707. doi: 10.4236/msa.2014.510071.
References
[1]   Vandenbossche, M., Jimenez, M., Casetta, M., Beaurain, A., Bourbigot, S. and Trasnel, M. (2013) Chitosan-Grafted Nonwoven Geotextile for Heavy Metals Sorption in Sediments. Reactive and Functional Polymers, 73, 53-59.
http://dx.doi.org/10.1016/j.reactfunctpolym.2012.09.002

[2]   Gouzy, A. and Duco, G. (2008) Air Purifiers, 75, 6-10.

[3]   Bailey, S.E., Olin, T.J., Bricka, R.M. and Adrian, D.D. (1999) A Review of Potentially Low-Cost Sorbents for Heavy Metals. Water Research, 33, 2469-2479.
http://dx.doi.org/10.1016/S0043-1354(98)00475-8

[4]   Zhou, D., Zhang, L., Zhou, J. and Guo, S. (2004) Cellulose/Chitin Beads for Adsorption of Heavy Metals in Aqueous Solution. Water Research, 38, 2643-2650.
http://dx.doi.org/10.1016/j.watres.2004.03.026

[5]   Shetty, A. (2006) M.Sc. Thesis, Faculty of Worcester Polytechnic Institute, Worcester.

[6]   Planisamy, K. and Nomanbhy, S.M. (2005) Electronic Journal of Biotechnology, 8.
http://www.ejbiotechnology.info/content/vol8/issue1/7/index.html

[7]   Rengaraj, S., Yeon, K.H. and Moon, S.H. (2001) Removal of Chromium from Water and Wastewater by Ion Exchange Resins. Journal of Hazardous Materials, 78, 273-287.
http://dx.doi.org/10.1016/S0304-3894(01)00291-6

[8]   Yurlova, L., Kryvoruchko, A. and Kornilovich, B. (2002) Removal of Ni(II) Ions from Wastewater by Micellar-Enhanced Ultrafiltration. Desalination, 144, 255-260.
http://dx.doi.org/10.1016/S0011-9164(02)00321-1

[9]   Bailey, S.E., Olin, T.J. and Bricka, R.M. (1997) Report (SERDP)-97-L, US Army Engineer Waterways Experiment Station, Vicksbury.

[10]   Olin, T.J., Rosado, J.M., Bailey, S.E. and Bricka, R.M. (1966) Report (SERDP). Prepared for USEPA and SERDP, 96387.

[11]   Elnagar, Kh., Shaaban, M.F., Samaha, S.H. and El-Alfy, E.A. (2012) Journal of International Environmental Application & Science, 7, 242-248.

[12]   Huang, K., Wu, W.J., Chen, J. and Lian, H. (2008) Application of Low-Molecular-Weight Chitosan in Durable Press Finishing. Carbohydrate Polymers, 73, 254-260.
http://dx.doi.org/10.1016/j.carbpol.2007.11.023

[13]   Gerente, C., Lee, V.K.C., Cloirec, P. and McKay, G. (2007) Application of Chitosan for the Removal of Metals from Wastewaters by Adsorption—Mechanisms and Models Review. Critical Reviews in Environmental Science and Technology, 37, 41-127.
http://dx.doi.org/10.1080/10643380600729089

[14]   Pontoni, L. and Fabbericino, M. (2012) Use of Chitosan and Chitosan-Derivatives to Remove Arsenic from Aqueous Solutions—A Mini Review. Carbohydrate Research, 356, 86-92.
http://dx.doi.org/10.1016/j.carres.2012.03.042

[15]   Zhou, Y.M., Gao, B., Zimmerman, A.R., Fang, J., Sun, Y.N. and Cao, X.D. (2013) Sorption of Heavy Metals on Chitosan-Modified Biochars and Its Biological Effects. Chemical Engineering Journal, 231, 512-518.

[16]   Bhattacharya, K.G. and Sharma, A. (2004) Azadirachta Indica Leaf Powder as an Effective Biosorbent for Dyes: A Case Study with Aqueous Congo Red Solutions. Journal of Environmental Management, 71, 217-229.

[17]   Michael, M.N. and El-Zaher, N.A. (2004) Egyptian Journal of Chemistry, 47, 93-100.

[18]   Ibrahim, S.F. (2003) Investigation into the Effect of UV\Ozone Treatments on Physical Properties and Dyeing Kinetics of Some Polymeric Fabrics. Ph.D. Thesis, Faculty of Science, Cairo University, Giza.

[19]   Osman, E.M., Michael, M.N. and Gohar, H. (2010) International Journal of Chemistry, 2, 28-39.

[20]   Hebeish, A., Shaaban, M.F. and Ahmed, K.A. (2013) Chitosan Induced Bactericidal Properties and Improved Printability to Cotton Fabrics. Journal of Applied Sciences Research, 9, 1754-1758.

[21]   Shaaban, M.F., El-Alfy, E.A. and Zamzam, N.E. (2010) 7th International Conference of Textile Research Division, NRC, Cairo, 7, 429-432.

[22]   Vogel, A. (1961) 3rd Edition, Longman, London.

[23]   Sionkowska, A., Kaczmarek, H., Wisniewski, M., Skopinska, J., Lazare, S. and Tokarev, V. (2006) The Influence of UV Irradiation on the Surface of Chitosan Films. Surface Science, 600, 3775-3779.
http://dx.doi.org/10.1016/j.susc.2006.01.090

[24]   Blanchard, E.J. and Graves, E.E. (2002) Polycarboxylic Acids for Flame Resistant Cotton/Polyester Carpeting. Textile Research Journal, 72, 39-43.

[25]   Yang, C.Q. (1993) Effect of pH on Nonformaldehyde Durable Press Finishing of Cotton Fabric: FT-IR Spectroscopy StudyPart I: Ester Crosslinking. Textile Research Journal, 63, 420-430.
http://dx.doi.org/10.1177/004051759306300707

[26]   Yang, C.Q. (1993) Effect of pH on Nonformaldehyde Durable Press Finishing of Cotton Fabric: FT-IR Spectroscopy Study Part II: Formation of the Anhydride Intermediate. Textile Research Journal, 63, 706-711.
http://dx.doi.org/10.1177/004051759306301202

[27]   Alonso, D., Gimeno, M., Olayo, R., Vázquez-Torres, H., Sepúlveda-Sánchez, J.D. and Shirai, K. (2009) Cross-Linking Chitosan into UV-Irradiated Cellulose Fibers for the Preparation of Antimicrobial-Finished Textiles. Carbohydrate Polymer, 77, 536-543.

[28]   Coma, V., Sebti, I., Pardon, P., Pichavant, F.H. and Deschamps, A. (2003) Film Properties from Crosslinking of Cellulosic Derivatives with a Polyfunctional Carboxylic Acid. Carbohydrate Polymers, 51, 265-271.
http://dx.doi.org/10.1016/S0144-8617(02)00191-1

[29]   Guibal, E. (2004) Interactions of Metal Ions with Chitosan-Based Sorbents: A Review. Separation and Purification Technology, 38, 43-74.
http://dx.doi.org/10.1016/j.seppur.2003.10.004

[30]   Metcalf & Eddy, Inc. (1991) Wastewater Engineering, 3, 30-35.

[31]   Shaaban, M.F. (2007) Ph.D. Thesis, Faculty of Science, Helwan University, Helwan.

 
 
Top