OJAppS  Vol.4 No.9 , August 2014
Impact of Dye-Sensitized Solar Cell Anode Preparation on Performance
ABSTRACT
In this paper, the suitable molecular weight of polyethylene glycol (PEG) and annealing temperature for dye-sensitized solar cells (DSSCs) anode was obtained by assessing the performance of DSSCs. The output current characteristic of the DSSCs is to explore factors that affect cell conversion efficiency and the effect of the mechanism. Experimental results show that the annealing temperature of 500°C and adding PEG of molecular weight 2000, the TiO2 thin film electrode TiO2 film electrode has good optical properties.

Cite this paper
Gu, D. , Zhang, Q. , Wu, Q. and Zhu, Y. (2014) Impact of Dye-Sensitized Solar Cell Anode Preparation on Performance. Open Journal of Applied Sciences, 4, 467-472. doi: 10.4236/ojapps.2014.49045.
References
[1]   O’Regan, B. and Gratzel, M. (1991) A Low Cost, High Efficiency Solar Cell Based on Dye-Sensitized Colloidal TiO2 Films. Nature, 353, 737-740.
http://dx.doi.org/10.1038/353737a0

[2]   Nazeeruddin, M.K., Kay, A. and Gratzel, M. (1993) Conversion of Light to Electricity by cis-X-bis-(2,2’-bipyridyl- 4,4’-dicarboxylat-e) Ruthenium (II): Charge-Transfer Sensitizers (X = Cl-, Br-, I-, CN- and SCN-) on Nanocrys-Talline Titanium Dioxide Electrodes. Journal of the American Chemical Society, 115, 6382-6390.
http://dx.doi.org/10.1021/ja00067a063

[3]   Nazeeruddin, M.K., Comte, P. and Gratzel, M. (2001) Engineering of Efficient Panchromatic Sensitizers for Nanoc Rystalline TiO2-Based Solar Cells. Journal of the American Chemical Society, 123, 1613-1624.
http://dx.doi.org/10.1021/ja003299u

[4]   Yasuo, C., Ashrafui, I., Yuki, W., et al. (2006) Dye-Sensitized Solar Cells with Conversion Efficiency of 11.1%. Japanese Journal of Applied Physics, 45, 638-640.

 
 
Top