JSEMAT  Vol.4 No.5 , August 2014
Transfer of Machined Patterns on an Aluminum Plate to Pyrex Glass Using Reactive Ion Etching SF6 Plasma without Masks
ABSTRACT

A method for etching the surface of a Pyrex glass substrate using the Reactive Ion Etching process without the use of masks is reported. Variations in the machined surface on an auxiliary plate, manufactured in aluminum and placed below a Pyrex glass slide, were transferred to the upper surface of the substrate. SF6 as etching gas and low pressure chamber to promote the increase of mean free path of ions were used. Two etching ratios were found, general, that affects the entire surface of the substrate, and differential, which generates the relief on the surface of the glass. Differential etching depth showed a linear behavior with respect to time; the mean differential etching rate obtained was 43 nm/min. The same phase between the auxiliary plate machining and the etched pattern on the substrate is preserved. With this technique it was possible to manufacture convex and concave surfaces; some examples are given. The arithmetic mean roughness achieved with the proposed method was found to be N1 class, ideal for the development of optical corrector plates.


Cite this paper
Ortiz-Lima, C. , Quiñones-Novelo, F. , Jaramillo-Núñez, A. and Castro-Ramos, J. (2014) Transfer of Machined Patterns on an Aluminum Plate to Pyrex Glass Using Reactive Ion Etching SF6 Plasma without Masks. Journal of Surface Engineered Materials and Advanced Technology, 4, 262-269. doi: 10.4236/jsemat.2014.45030.
References
[1]   Choe, H.H. (2006) Basic Study of a Glass Substrate in Dry Etching System. Vacuum, 81, 344-346.
http://dx.doi.org/10.1016/j.vacuum.2006.06.010

[2]   Li, X., Abe, T. and Esashi, M. (2001) Deep Reactive Ion etching of Pyrex Glass Using SF6 Plasma. Sensors and Actuators, A87, 139-145.
http://dx.doi.org/10.1016/s0924-4247(00)00482-9

[3]   Park, J.H., Lee, N.-E., Lee J., Park, J.S. and Park, H.D. (2005) Deep Dry Etching of Borosilicate Glass by Using SF6 and SF6/Ar Inductively Coupled Plasmas. Microelectronic Engineering, 82, 119-128.
http://dx.doi.org/10.1016/j.mee.2005.07.006

[4]   Kolari, K. (2007) Deep Plasma Etching of Glass with a Silicon Shadow Mask. Sensors and Actuators, A141, 677-684.
http://dx.doi.org/10.1016/j.sna.2007.09.005

[5]   Wüthrich, R. (2009) Micromachining Using Electrochemical Discharge Phenomenon: Fundamentals and Applications of Spark Assisted Chemical Engraving. 1st Edition, William Andrew Applied Science Publishers, USA.
http://dx.doi.org/10.1016/b978-0-8155-1587-6.50006-2

[6]   Bu, M., Melvin, T., Ensell, G.J., Wilkinson, J.S. and Evans, A.G.R. (2004) A New Masking Technology for Deep Glass Etching and Its Microfluidic Application. Sensors and Actuators, A115, 476-482.
http://dx.doi.org/10.1016/j.sna.2003.12.013

[7]   Akashi, T. and Yoshimura, Y. (2006) Deep Reactive Ion Etching of Borosilicate Glass Using an Anodically Bonded Silicon Wafer as an Etching Mask. Journal of Micromechanics and Microengineering, 16, 1051-1056.
http://dx.doi.org/10.1088/0960-1317/16/5/024

[8]   Bradley, J.D.B., Ay, F., Wörhoff, K. and Pollnau, M. (2007) Fabrication of Low-Loss Channel Waveguides in Al2O3 and Y2O3 Layers by Inductively Coupled Plasma Reactive Ion Etching. Applied Physics, B89, 300-318.
http://dx.doi.org/10.1007/s00340-007-2815-3

[9]   Park, J.H., N.-E., Lee, J. and Lee, J. (2005) Deep Reactive Ion Etching of Borosilicate Glass by sing SF6 and SF6/Ar Inductively Coupled Plasmas. Journal of Korean Physical Society, 47, S422-S428.
http://dx.doi.org/10.1016/j.mee.2005.07.006

[10]   Chabloz, M., Jiao, J., Yoshida, Y., Matsuura, T. and Tsutsumi, K. (2000) A Method to Evade Microloading Effect in Deep Reactive Ion Etching for Anodically Bonded Glass-Silicon Structures. MEMS 2000 0-7803-5273-4/00, 283-287.
http://dx.doi.org/10.1109/memsys.2000.838530

[11]   Hansen, H., Gardeniers, H., de-Boer, M., Elwenspoek, M. and Fluitman, J. (1996) A Survey on Reactive Ion Etching of Silicon in Microtechnology. Journal of Micromechanics and Microengineering, 6, 14-28.
http://iopscience.iop.org/0960-1317/6/1/002/
http://dx.doi.org/10.1088/0960-1317/6/1/002


 
 
Top