JSEMAT  Vol.4 No.5 , August 2014
Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing
ABSTRACT

The atomic-scale surface roughness of Si(110) reconstructed via high-temperature Ar annealing is immediately increased by non uniform accidental oxidation during the unloading process (called reflow oxidation) during high-temperature Ar annealing. In particular, for a reconstructed Si(110) surface, characteristic line-shaped oxidation occurs at preferential oxidation sites appearing in pentagonal pairs in the directions of Si[-112] and/or [-11-2]. We previously reported that the roughness increase of reconstructed Si(110) due to reflow oxidation can be restrained by replacing Ar gas with H2 gas at 1000&#176C during the cooling to 100&#176C after high-temperature Ar annealing. It was speculated that preferential oxidation sites on reconstructed Si(110) were eliminated by H2 gas etching and hydrogen termination of dangling bonds. Thus, it is necessary to investigate the effect of H2 gas etching and hydrogen termination behavior on the reconstructed Si(110) surface structure. In this study, we evaluated in detail the relationship between the temperature at which the H2 gas replaces the Ar in high-temperature Ar annealing and the reconstructed Si(110) surface structure. The maximum height of the roughness on the reconstructed surface was the same as if Ar gas was used when the H2 gas introduction temperature was 200&#176C, although the amount of reflow oxidation was decreased to 70% by hydrogen termination. Furthermore, line-shaped oxidation still occurs when H2 gas replaces Ar at this low temperature. Therefore, we conclude that oxidation is caused by slight Si etching at low temperatures, and thus the preferential oxidation sites on the reconstructed structure must be eliminated by hydrogen etching in order to form an atomically smooth Si(110) surface.


Cite this paper
Araki, K. , Takeda, R. , Sudo, H. , Izunome, K. and Zhao, X. (2014) Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing. Journal of Surface Engineered Materials and Advanced Technology, 4, 249-256. doi: 10.4236/jsemat.2014.45028.
References
[1]   Mack, C.A. (2011) Fifty Years of Moore’s Law. IEEE Transactions on Semiconductor Manufacturing, 24, 202-207.
http://dx.doi.org/10.1109/TSM.2010.2096437

[2]   Kish, L.B. (2002) End of Moore’s Law: Thermal (Noise) Death of Integration in Micro and Nano Elecronics. Physics Letters A, 305, 144-149.
http://dx.doi.org/10.1016/S0375-9601(02)01365-8

[3]   Okada, T., Takeda, R., Kubota, H. and Matsushita, Y. (2007) Surface Roughness Scattering Model Developments for p-MOS Monte Carlo Tool and Mobility Discussion about Wafer Orientation/Morphology. Proceedings of the 12th International Workshop on Computational Electronics (IWCE), 13-14.

[4]   Fischetti, M.V. and Laux, S.E. (1993) Monte Carlo Study of Electron Transport in Silicon Inversion Layers. Physics Review B, 48, 2244.
http://dx.doi.org/10.1103/PhysRevB.48.2244

[5]   Hamada, T., Teramoto, A., Akahori, H., Nii, K., Suwa, T., Hirayama, M. and Ohmi, T. (2004) High Performance Low Noise CMOS Fabricated on Flattened (110) Oriented Si Substrate. IEICE Technical Report ED, 104, 41-44.

[6]   Hasunuma, R., Okamoto, J., Tokuda, N. and Yamabe, K. (2004) Nonuniformity in Ultrathin SiO2 on Si(111) Characterized by Conductive Atomic Force Microscopy. Japanese Journal of Applied Physics, 43, 7861-7865.
http://dx.doi.org/10.1143/JJAP.43.7861

[7]   Zhong, L., Hojo, H., Matsushita, Y., Aiba, Y., Hayashi, K., Takeda, R., Shirai, H., Saito, H., Matsushita, J. and Yoshikawa, J. (1996) Evidence of Spontaneous Formation of Steps on Silicon (100). Physics Review B, 54, R2304-R2307. http://dx.doi.org/10.1103/PhysRevB.54.R2304

[8]   Zhong, L., Hojo, H., Aiba, Y., Chaki, K., Yoshikawa, J. and Hayashi, K. (1996) Atomic Steps on Silicon (001) Surface Tilted toward an Arbitrary Direction. Applied Physics Letters, 68, 1823-1825.
http://dx.doi.org/10.1063/1.116025

[9]   Tokumoto, H. and Morita, Y. (1996) Structure of Hydrogen-Passivated Si surfaces Studied by STM. Hyomen Kagaku, 17, 516-522 [in Japanese].
http://dx.doi.org/10.1380/jsssj.17.516

[10]   Kumagai, Y., Namba, K., Komeda, T. and Nishioka, Y. (1998) Formation of Periodic Step and Terrace Structure on Si(100) Surface during Annealing in Hydrogen Diluted with Inert Gas. Journal of Vacuum Science & Technology A, 16, 1775-1778.
http://dx.doi.org/10.1116/1.581301

[11]   Ohsawa, K., Kogure, Y., Araki, K., Isogai, H., Takeda, R., Matsushita, Y., Hasunuma, R. and Yamabe, K. (2008) Uniform Growth of Ultrathin SiO2 Films (2)—Roughness of Thermal Oxide Grown on Si(100) and Si(110) Surfaces, Ext. Abstr. 55th Spring Meeting 2008 of the Japan Society of Applied Physics and Related Societies, Chiba, 27-30 March 2008, 27a-X-4, 837 (in Japanese).

[12]   Araki, K., Isogai, H., Takeda, R., Izunome, K., Matsushita, Y., Takahashi, N. and Zhao, X. (2009) Effect of Reflow Oxidation on Si Surface Roughness during High-Temperature Annealing. Japanese Journal of Applied Physics, 48, Article ID: 06FE05.
http://dx.doi.org/10.1143/JJAP.48.06FE05

[13]   Araki, N. (2009) Influence of Electrostatic Charge on Recombination Lifetime and Native Oxide Growth on HF-Treated Silicon Wafers. Japanese Journal of Applied Physics, 48, Article ID: 011201.
http://dx.doi.org/10.1143/JJAP.48.011201

[14]   Araki, K., Isogai, H., Takeda, R., Izunome, K., Matsushita, Y. and Zhao, X. (2010) Effect of Hydrogen Termination on Surface Roughness Variation of Si(110) by Reflow Oxidation during High-Temperature Ar Annealing. Japanese Journal of Applied Physics, 49, Article ID: 085701.
http://dx.doi.org/10.1143/JJAP.49.085701

[15]   Kimura, Y. and Niwano, M. (2001) Initial Stage of Etching of Si Electrode Surfaces Investigated by Surface Infrared Spectroscopy. Proceedings of the Electrochemical Society, 2000-25, 82-89.

[16]   Kuge, J., Terashi, M. and Niwano, M. (1997) In-Situ IR Study of Hydrogen Adsorption on Si Surface. IEICE Technical Report SDM, 97, 25-30 (in Japanese).

[17]   Akahori, H., Nii, K., Tsukamoto, K., Teramoto, A. and Ohmi, T. (2004) Control of Native Oxide Growth on Silicon Surface. IEICE Technical Report SDM, 187, 23-28 (in Japanese).

[18]   Fujii, T. and Tanabe, M. (1990) Measurement of Film Thickness with XPS. Shimadzu Hyoron, 47, 89 (in Japanese).

[19]   Suemitsu, M., Kato, A., Togashi, H., Kanno, A., Yamamoto, Y., Teraoka, Y., Yoshigoe, A., Narita, Y. and Enta, Y. (2007) Real-Time Observation of Initial Thermal Oxidation on Si(110)-16 × 2 Surfaces by O 1s Photoemission Spectroscopy Using Synchrotron Radiation. Japanese Journal of Applied Physics, 46, 1888-1890.
http://dx.doi.org/10.1143/JJAP.46.1888

[20]   Jeon, S., Taoka, N., Matsumoto, H., Nakano, K., Koyama, S., Kakibayasi, H., Araki, K., Miyashita, M., Izunome, K., Takenaka, M. and Takagi, S. (2013) Impacts of Surface Roughness Reduction in (110) Si Substrates Fabricated by High-Temperature Annealing on Electron Mobility in n-Channel Metal-Oxide-Semiconductor Field-Effect Transistors on (110) Si. Japanese Journal of Applied Physics, 52, Article ID: 04CC26.
http://dx.doi.org/10.7567/JJAP.52.04CC26

 
 
Top