JMMCE  Vol.2 No.5 , September 2014
Effect of V-Ti on the Microstructure and Abrasive Wear Behavior of 6CrC Cast Steel Mill Balls
ABSTRACT
Iron-chromium cast alloys are basically abrasive wear resistant materials particularly employed in mining industry; these alloys are often utilized in the manufacture of milling balls. In particular, high Cr and high C cast alloys have been subjected of significant research; for instance, most reports have been addressed on analyzing the relation between microstructure and the abrasive wear behavior; however, there exist a reduced number of reports on relatively low Cr and low C cast alloys. In this research, five low Cr cast steels containing additions of V and Ti were melted in an open atmosphere induction furnace. Comparisons on the morphology, size, type and distribution of carbides were carried through optical microscopy, SEM and XRD. Hardness testing was employed at room temperature with the purpose of correlate to wear behavior. A laboratory pilotplant ball-mill set with a batch of ore was utilized in order to evaluate the abrasive wear resistance. According to microstructure observations, a martensitic primary matrix was revealed in all specimens. The fraction of M7C3 and M3C interdendritic eutectic carbides varied according to alloying level. Further results indicated that variations in the shape and size of M7C3 and M3C along with the presence of V and Ti carbides influenced on the abrasive wear behavior of low Cr cast steel mill balls.

Cite this paper
Maldonado-Ruiz, S. , Orozco-González, P. , Baltazar-Hernández, V. , Bedolla-Jacuinde, A. and Hernández-Rodríguez, M. (2014) Effect of V-Ti on the Microstructure and Abrasive Wear Behavior of 6CrC Cast Steel Mill Balls. Journal of Minerals and Materials Characterization and Engineering, 2, 383-391. doi: 10.4236/jmmce.2014.25043.
References
[1]   Albertin, E. and Sinatora, A. (2001) Effect of Carbide Fraction and Matrix Microstructure on the Wear of Cast Iron Balls Tested in a Laboratory Ball Mill. Wear, 250, 492-501. http://dx.doi.org/10.1016/S0043-1648(01)00664-0

[2]   Cikara, D., Rakin, M. and Todic, A. (2009) Cast Steel-SiC Composites as Wear Resistant Materials. FME Transactions, 37, 151-155.

[3]   Studnicki, A., Kilarski, J., Przybyl, M., Suchoń, J. and Bartocha, D. (2006) Wear Resistance of Chromium Cast Iron—Research and Application. Journal of Achievements in Materials and Manufacturing Engineering, 16, 63-73.

[4]   Rajagopal, V. and Iwasaki, I. (2006) Corrosion Properties of Cast Iron Ball Materials in Wet Grinding. Corrosion, 48, 124-131. http://dx.doi.org/10.5006/1.3299818

[5]   Chenje, T.W., Simbi, D.J. and Navara, E. (2004) Relation between Microstructure, Hardness, Impact Toughness and Wear Performance of Selected Grinding Media for Mineral Ore Milling Operations. Materials & Design, 25, 11-18. http://dx.doi.org/10.1016/S0261-3069(03)00168-7

[6]   Sampathkumaran, P., Seetharamu, S., Ranganathaiah, C., Raj, J.M., Pujari, P.K., Maheshwari, P., Dutta, D. and Kishore (2011) Surface and Bulk Defects in Cr-Mn Iron Alloy Cast in Metal and Sand Moulds: Characterization by Positron Annihilation Techniques. Journal of Surface Engineered Materials and Advanced Technology, 1, 136-143. http://dx.doi.org/10.4236/jsemat.2011.13021

[7]   Atabaki, M.M., Jafari, S. and Abdollah-Pour, H. (2012) Abrasive Wear Behavior of High Chromium Cast Iron and Hadfield Steel—A Comparison. Journal of Iron and Steels Research, 19, 43-50.
http://dx.doi.org/10.1016/S1006-706X(12)60086-7

[8]   Weber, K., Regener, D., Mehner, H. and Menzel, M. (2001) Characterization of the Microstructure of High-Chromium Cast Irons Using Mösbauer Spectroscopy. Materials Characterization, 46, 399-406. http://dx.doi.org/10.1016/S1044-5803(01)00143-7

[9]   Thorpe, W.R. and Chicco, B. (1993) The Fe-Rich Corner of the Metastable C-Cr-Fe Liquidus Surface. Metallurgical Transactions A, 24, 981-988.

[10]   Breyer, J.P. and Walmag, G. (2002) Metallurgy of High Chromium-Molybdenum White Iron and Steels Rolls. Rolls for the Metalworking Industries—ISS, Warrendale, 29-40.

[11]   Schon, C.G. and Sinatora, A. (1998) Simulation of Solidification Paths in High Chromium White Cast Irons for Wear Applications. Calphad, 22, 437-448. http://dx.doi.org/10.1016/S0364-5916(99)00003-6

[12]   Hugget, P. and Ben-Nissan, B. (2007) Development of a Low Melting Point White Cast Iron for Use in Composite Alloy Manufacture. Materials Forum, 31, 16-23.

[13]   Agunsoye, J.O., Isaac, T.S. and Abiona, A.A. (2013) On the Comparison of Microstructure Characteristics and Mechanical Properties of High Chromium White Iron with the Hadfield Austenitic Manganese Steel. Journal of Minerals and Materials Characterization and Engineering, 1, 24-28.
http://dx.doi.org/10.4236/jmmce.2013.11005

[14]   Agunsoye, J.O., Aigbodion, V.S. and Sanni, O.S. (2011) Effect of Heat Treatment on Microstructure and Mechanical Properties of NF6357A Cast Alloy for Wear Resistance Application. Journal of Minerals & Materials Characterization & Engineering, 10, 1077-1086.

[15]   Albertin, E.B. and Sinatora, A. (2001) Effect of Carbide Fraction and Matrix Microstructure on the Wear of Cast Iron Balls Tested in a Laboratory Ball Mill. Wear, 250, 492-502. http://dx.doi.org/10.1016/S0043-1648(01)00664-0

[16]   Dogan, O.N., Laird II, G. and Hawk, J.A. (1995) Abrasion Resistance of the Columnar Zone in High Cr White Cast Irons. Wear, 181-183, 342-349. http://dx.doi.org/10.1016/0043-1648(95)90041-1

[17]   Dogan, O.N. (1996) Columnar to Equiaxed Transition in High Cr White Iron Castings. Scripta Materialia, 35, 163- 168. http://dx.doi.org/10.1016/1359-6462(96)00110-8

[18]   Maldonado-Ruiz, S.I., Lopez, D., Velasco, A. and Colas, R. (2004) Microstructural Evaluation of Wear Resistant High Chromium, High Carbón Cast Irons. Materials Science and Technology, 20, 393-398. http://dx.doi.org/10.1179/026708304225012224

[19]   Maldonado-Ruíz, S.I., Martínez, D.I., Velasco, A. and Colás, R. (2005) Wear of White Cast Irons by Impact of Direct Reduced Iron Pellets. Wear, 259, 361-366. http://dx.doi.org/10.1016/j.wear.2005.02.061

[20]   (2010) Design-Ease 7.1, Stat-Ease, IncTM.

[21]   Albertin, E. and De Moraes, S.L. (2007) Maximizing Wear Resistance of Balls for Grinding of Coal. Wear, 263, 43-47. http://dx.doi.org/10.1016/j.wear.2007.02.013

[22]   Arikan, M.M., Cimenoglu, H. and Kayali, E.S. (2001) The Effect of Titanium on the Abrasion Resistance of 15Cr-3Mo White Cast Iron. Wear, 247, 231-235. http://dx.doi.org/10.1016/S0043-1648(00)00523-8

[23]   Werquin, J.C. and Caillard, J.C. (1988) New Vertically Spum Cast Rolls for Hot and Cold Rolling and Their Ability to Satisfy the New Demands of Current Rolling Practices. 30th MWSP Conference Proceedings, 26, 311-336.

 
 
Top