Gray, M.R. (1994) Upgrading of Oilsands Bitumen and Heavy Oil. CRC Press, Boca Raton, 348-352.
 Best, J. and Hoberg, G. (2008) Alberta’s Oil Sands: Key Issues and Impacts. Economy, Trade and Finance, 3, 19-21.
 Takamura, K. (1985) Physico-Chemical Characterization of Athabasca Oil Sand and Its Significance to Bitumen Recovery. AOSTRA Journal of Research, 2, 1-10.
 Schramm, L., Stasiuk, E., Yarranton, H., Maini, B. and Shelfantook, B. (2003) Temperature Effects from the Conditioning and Flotation of Bitumen from Oil Sands in Terms of oil Recovery and Physical Properties. Journal of Canadian Petroleum Technology, 42, 55-61. http://dx.doi.org/10.2118/03-08-05
 Czarnecki, J., Radoev, B., Schramm, L.L. and Slavchev, R. (2005) On the Nature of the Athabasca Oil Sands. Advances in Colloid and Interface Science, 114-115, 53-60. http://dx.doi.org/10.1016/j.cis.2004.09.009
 Schramm, L., Stasium, E. and Turner, D. (2003) The Influence of Interfacial Tension in the Recovery of Bitumen by Water-Based Conditioning and Flotation of Athabasca Oil Sands. Fuel Processing Technology, 80, 101-118.http://dx.doi.org/10.1016/S0378-3820(02)00224-2
 Elliott, A., Eastwood, J. and Magennis, L. (2013) Evolution and Application of Geoscience Technology to Integrated Reservoir Characterisation for Enhanced Heavy Oil Recovery. Proceedings of the 6th International Petroleum Technology Conference, 26-28 March 2013, Beijing, 6-11.
 Su, L., Xu, Z. and Masliyah, J. (2005) Role of Oily Bubbles in Enhancing Bitumen Flotation. Symposium of the Centenary of Flotation, Brisbane, 15-18 October 2013, 699-706.
 Smith, R. and Schramm, L. (1992) The Influence of Mineral Components on the Generation of Natural Surfactants from Athabasca Oil Sands in the Alkaline Hot Water Process. Fuel Processing Technology, 30, 1-14.http://dx.doi.org/10.1016/0378-3820(92)90072-X
 Wallwork, V., Xu, Z. and Masliyah, J. (2004) Processibility of Athabasca Oil Sand Using a Laboratory Hydrotransport Extraction System. The Canadian Journal of Chemical Engineering, 82, 687-695. http://dx.doi.org/10.1002/cjce.5450820407
 Finch, J.A. and Kuan, S.H. (2013) Air-Assisted Solvent Extraction: Scale-Up Attempt with the Jameson Cell. Proceedings of the 10th International Mineral Processing Conference, Santiago, 15-18 October 2013, 15-18.
 Brame, S.E., Castle, J.W., Fuwami, O.K. and Falta, R.W. (2006) History Matching of Heavy Oil Production for Comparing New Approaches to Generating Reservoir Property Distribution. Proceedings of SPE/DOE Symposium on Improved Oil Recovery, Tulsa, 17-21 April 2004, 93-96.
 Shelfantook, W.E. (2004) Perspective on the Selection of Froth Treatment Processes. The Canadian Journal of Chemical Engineering, 82, 704-709. http://dx.doi.org/10.1002/cjce.5450820409
 Villarroel, T. and Hernandez, R.T. (2013) Technological Developments for Enhancing Extra Heavy Oil Productivity. Proceedings of the AAPG Annual Convention and Exhibition, Pittsburgh, 19-22 May 2013, 1-41.
 Hashemi, R., Nassar, N.N. and Almao, P.P. (2013) Enhanced Heavy Oil Recovery by in Situ Prepared Ultradispersed Multimetallic Nanoparticles: A Study of Hot Fluid Flooding for Athabasca Bitumen Recovery. Energy Fuels, 27, 2194-2201. http://dx.doi.org/10.1021/ef3020537
 Bennett, B., Jiang, C., Snowdon, L.R. and Larter, S.R. (2014) A Practical Method for the Separation of High Quality Heavy Oil and Bitumen Samples from Oil Reservoir Cores for Physical and Chemical Property Determination. Fuel, 116, 208-213. http://dx.doi.org/10.1016/j.fuel.2013.08.006
 Castle, J.W., Falta, R.W., Dinwiddie, C.L., Brame, S. and Bridges, R.A. (2002) Quantitative Methods for Reservoir Characterization and Improved Recovery: Application for Heavy Oil Sands. Final Report for USDOE, Golder Associates Ltd., Edmonton. http://dx.doi.org/10.2172/824482
 Hawes, R.I., Dawe, R.A. and Evans, R.N. (1997) The Release of Solution Gas from Water Flooded Residual Oil. Society Petroleum Engineering Journal, 2, 379-388.
 Falcone, G., Hewitt, G.F. and Alimonti, C. (2009) Multiphase Flow Metering. Elsevier, Amsterdam, 77-84.