WJM  Vol.4 No.7 , July 2014
Pilot study on the Non-Invasive Detectability of Femoral Neck Fractures with Frequency Response Functions
Abstract: A suspicion of a femoral neck fracture is a frequently recurring situation, especially in nursing homes. For the clarification of such a suspicion normally imaging techniques are used. Such equipment is expensive and therefore is located in hospitals. In addition to the costs, a transport causes stress for the patient. This pilot study is devoted to the question whether the detection of a femoral neck fracture with vibration measurements is possible in principal. In such a case, the clarification could be done on-site by an ordinary person using much cheaper equipment. This would reduce the stress for the patient and save money. For this purpose vibration measurements on a dead body with intact, with partially fractured and with complete cut femoral neck have been performed. Two different methods for the vibration initiation have been investigated, the so called impact testing and the shaker testing. The frequency response function has been determined for all combinations on both sides of the body. It turned out that there is a clear difference in the frequency response functions of the fractured bone with respect to the intact bone when shaker testing is used. This indicates that the method could have the potential to be a cost-saving alternative to imaging techniques. However, in a next step a statistically reliable clinical survey on living persons needs to be done.
Cite this paper: Witteveen, W. , Wagner, C. , Jachs, P. , Froschauer, S. and Schöffl, H. (2014) Pilot study on the Non-Invasive Detectability of Femoral Neck Fractures with Frequency Response Functions. World Journal of Mechanics, 4, 210-216. doi: 10.4236/wjm.2014.47022.

[1]   Maia, N.M.M. (Ed.) (1998) Theoretical and Experimental Model Analysis. Research Studies Press, Hertfordshire, UK.

[2]   Ewins, D.J. (2000) Modal Testing. 2nd Edition, Research Studies Press, Hertfordshire, UK.

[3]   Nokes, L. (1998) The Use of Low-Frequency Vibration Measurement in Orthopedics. Proceedings of the Institution of Mechanical Engineers, 213, 271-289.

[4]   Cunningham, J.L., Kenwright, J. and Kershaw, C.J. (1990) Biomechanical Measurement of Fracture Healing. Journal of Medical Engineering & Technology, 14, 92-101.

[5]   Tower, S.S., Rodney, B.K. and Duwelius, P.J. (1993) Resonant Frequency Analysis of the Tibia as a Measure of Fracture Healing. Journal of Orthopaedic Trauma, 7, 552-557.

[6]   Nokes, L., Mintowt Czyzt, W.J., Fairclought, J.A., Makie, I. and Williams, J. (1985) Vibration Analysis in the Assessment of Conservatively Managed Tibial Fractures. Journal of Biomedical Engineering, 7, 40-44.

[7]   Benirschke, S.K., Mirels, H., Jones, D. and Tencer, A.F. (1993) The Use of Resonant Frequency Measurements for the Noninvasive Assessment of Mechanical Stiffness of the Healing Tibia. Journal of Orthopaedic Trauma, 7, 64-71.

[8]   Nakatsuchi, Y., Tsuchikane, A. and Nomura, A. (1996) Assessment of Fracture Healing in the Tibia Using the Impulse Response Method. Journal of Orthopaedic Trauma, 10, 50-62.

[9]   Cairns, N.J. (2010) The Feasibility of Vibration Analysis as a Technique to Detect Osseointegration of Transfemoral Implants. Ph.D. Thesis, Queensland University of Technology, Brisbane.

[10]   Cairns, N.J., Adam, C.J., Pearcy, M.J. and Smeathers, J.E. (2011) Evaluation of Modal Analysis Techniques Using Physical Modelsto Detect Osseointegration of Implants in Transfemoral Amputees. IEEE Engineering in Medicine and Biology Society, 2011, 1600-1603.

[11]   Dencker, H. and Moberg, E. (1968) Diagnosis of Soft-Tissue Interposition in Shaft Fractures of the Humerus and Femur by Measuring the Conduction of Vibration across the Fracture. Acta Chirurgica Scandinavica, 134, 540-542.

[12]   Lappi, V.G., King, M.S. and May, I.L. (1979) Determination of Elastic Constants for Human Femurs. Journal of Biomechanical Engineering, 101, 193-197.

[13]   Thomas, A.M.C., Luo, D.Z. and Dunn, J.W. (1991) Response of Human Femur to Mechanical Vibration. Journal of Biomedical Engineering, 13, 58-60.

[14]   Khalil, T.B., Viano, D.C. and Taber, L.A. (1981) Vibrational Characteristics of the Embalmed Human Femur. Journal of Sound and Vibration, 75, 417-436.

[15]   Misurya, R.K., Khare, A., Mallick, A., Sural, A. and Vishwakarma, G.K. (1987) Use of Tuning Fork in Diagnostic Auscultation of Fractures. Injury, 18, 63-64.

[16]   Jawad, Z., Odumala, A. and Jones, M. (2012) Objective Sound Wave Amplitude Measurement Generated by a Tuning Fork. An Analysis of Its Use as a Diagnostic Tool in Suspected Femoral Neck Fractures. Injury, 43, 835-837.

[17]   Sundararajan, D. (2001) The Discrete Fourier Transform: Theory, Algorithms and Applications. World Scientific Publishing Company, Singapore.

[18]   Jurist, J.M. (1970) In Vivo Determination of the Elastic Response of Bone—Method of Ulnar Resonant Frequency Determination. Physics in Medicine and Biology, 15, 417-426.

[19]   Bediz, B., Ozgüven, H.N. and Korkusuz, F. (2010) Vibration Measurements predict the Mechanical Properties of Human Tibia. Clinical Biomechanics, 25, 365-371.

[20]   Van der Perre, G., Van Audekercke, R., Martens, M. and Mulier, J.C. (1983) Identification of In-Vivo Vibration Modes of Human Tibiae by Modal Analysis. Journal of Biomedical Engineering, 105, 244-248.

[21]   Tsuchikane, A., Nakatsuchi, Y. and Nomura, A. (1995) The Influence of Joints and Soft Tissue on the Natural Frequency of the Human Tibia Using the Impulse Response Method. ARCHIVE: Proceedings of the Institution of Mechanical Engineers, 209, 149-155.