AM  Vol.2 No.5 , May 2011
Stability Loss of Rotating Elastoplastic Discs of the Specific Form
ABSTRACT
A method of calculating a possible stability loss by a rotating circular annular disc of variable thickness is suggested within the theory of perfect plasticity with the help of small parameter method. A characteristic equation for a critical radius of a plastic zone is obtained as a first approximation. The formula for the critical angular velocity, determining the stability loss of the disc according to the self-balanced form, is derived. The method using which we can take into account the disc’s geometry and loading parameters is also specified. The efficiency of the proposed method is shown in Section 5 while considering an illustrative example. The values of critical angular velocity of rotating are found numerically for different parameters of the disc.

Cite this paper
nullD. Lila and A. Martynyuk, "Stability Loss of Rotating Elastoplastic Discs of the Specific Form," Applied Mathematics, Vol. 2 No. 5, 2011, pp. 579-585. doi: 10.4236/am.2011.25077.
References
[1]   А. N. Guz and Yu. N. Nemish, “Method of Boundary Form Perturbation in the Mechanics of Continua,” in Russian, Vyshcha shk, Kiev, 1989.

[2]   D. D. Ivlev, “On the Loss of Bearing Capacity of Rotating Discs, Close to Circular Ones,” Izvestiya Akademii Nauk SSSR, Otdelenie Tekhnicheskikh Nauk, in Russian,No. 1, 1957, pp. 141-144.

[3]   D. D. Ivlev and L. V. Yershov, “Perturbation Method in the Theory of Elastoplastic Body,” in Russian, Nauka, Moscow, 1978.

[4]   L. V. Yershov and D. D. Ivlev, “On the Stability Loss of Rotating Discs,” Izvestiya Akademii Nauk SSSR, Otdelenie Tekhnicheskikh Nauk, in Russian, No. 1, 1958, pp. 124-125.

[5]   M. Mazière, J. Besson, S. Forest, B. Tanguy, H. Chalons and F. Vogel, “Overspeed Burst of Elastoviscoplastic Rotating Disks—Part I: Analytical and Numerical Stability Analyses,” European Journal of Mechanics—A/Solids, Vol. 28, No. 1, 2009, pp. 36-44. doi:10.1016/j.euromechsol.2008.07.008

[6]   M. Mazière, J. Besson, S. Forest, B. Tanguy, H. Chalons and F. Vogel, “Overspeed Burst of Elastoviscoplastic Ro- tating Disks: Part II—Burst of a Superalloy Turbine Disk,” European Journal of Mechanics—A/Solids, Vol. 28, No. 3, 2009, pp. 428-432. doi:10.1016/j.euromechsol.2008.10.002

[7]   D. M. Lila, “On the Instability of Rotating Elastoplastic Stepped Annular Disc, Loaded over the Boundary in the Middle Plane,” International Applied Mechanics (in Press).

[8]   D. M. Lila and А. A. Martynyuk, “On the Development of Instability of Rotating Elastoplastic Annular Disc,” International Applied Mechanics (in Press).

[9]   K. B. Bitseno and R. Grammel, “Technical Dynamics,” Gosudarstvennoe Izdatelstvo Tekhniko-Teoreticheskoy Literatury, in Russian, Vol. 2, Moscow and Leningrad, 1952.

[10]   I. V. Demianushko and I. A. Birger, “Stress Calculation of Rotating Discs,” in Russian, Mashinostroyeniye, Moscow, 1978.

[11]   A. M. Zenkour and D. S. Mashat, “Analytical and Numerical Solutions for a Rotating Annular Disk of Variable Thickness,” Applied Mathematics, Vol. 1, No. 5, 2010, pp. 431-438.

 
 
Top