Cite this paper
nullH. Huang, J. Bai, Z. Lu and Y. Guo, "A Novel Half-Bridge Power Supply for High Speed Drilling Electrical Discharge Machining," Journal of Electromagnetic Analysis and Applications
, Vol. 1 No. 2, 2009, pp. 108-113. doi: 10.4236/jemaa.2009.12017
 C. M. F. Odulio, L. G. Sison, and M. T. Escoto Jr, “Energy-saving flyback converter for EDM applications,” IEEE Region 10 Annual International Conference Proceedings, pp. 1-6, 2007.
N. L. Kachhara and K. S. Shah, “The electric discharge machining process.” Journal of the Institution of Engineers (India) -Mechanical Engineering Division, No. 51, pp. 67-73, 1971.
M. R. Cao, S. C. Yang, S. Q. Yang and Y. T. Qiao, “Experimental research on the process influencing machining velocity to small hole’s EDM,” Modem Manufacture Engineering (in Chinese), Vol. 4, pp. 82-83, 2005.
R. Casanueva, M. Ochoa, F. J. Azcondo, and S. Bracho, “Current mode controlled LCC resonant converter for electrical discharge machining applications,” Proceedings of the 2000 IEEE International Symposium on Industrial Electronics, Vol. 2, pp. 505-510, 2000.
G. Hua and F. C. Lee, “Soft-switching techniques in PWM converters,” IEEE Transactions on Industrial Electronics, Vol. 42, pp. 595-603, 1995.
K. Yoshida and T. Ninomiya, “A novel current resonant ZVS-PWM half-bridge converter,” Electronics & Communications in Japan, Part I: Communications, Vol. 82, pp. 45-55, 1999.
B. Sen, N. Kiyawat, P. K. Singh, S. Mitra, J. H. Ye, and P. Purkait, “Developments in electric power supply configurations for electrical-discharge-machining (EDM),” The 5th International Conference on Power Electronics and Drive Systems, Vol. 1, pp. 659-664, 2003.
B. Y. Song, W. S. Zhao, and G. L. Shao, “Current type of electrical discharge machining pulse generator,” China Mechanical Engineering (in Chinese), Vol. 12, pp. 386- 390, 2001.