JSEMAT  Vol.4 No.4 , July 2014
The Uniformal Metallization of the AlSiC Metal Matrix Composite Material Surface
ABSTRACT

The surface of the AlSiC composite material consists of aluminum and silicon carbide areas. The uniformal metallization by nickel is necessary in order to provide solderability and high thermal conductivity of the surface. The process of chemical deposition of nickel coatings elaborated in the research center VIAM yields the uniformal highly adhesive metallization. The kinetics of the deposition process has been studied and the estimation of the coatings quality has been made in comparison with commercially available samples produced elsewhere.


Cite this paper
Sevostyanov, N. , Nishchev, K. and Novopoltsev, M. (2014) The Uniformal Metallization of the AlSiC Metal Matrix Composite Material Surface. Journal of Surface Engineered Materials and Advanced Technology, 4, 237-241. doi: 10.4236/jsemat.2014.44026.
References
[1]   Sarabjot, S. and Ryssel, H. (2008) Lifetime of Power Modules. 7th Indo-German Winter Academy, Chennai, 13-19 December 2008.
http://www.leb.eei.uni-erlangen.de/winterakademie/2008/report/content/course03/pdf/0312.pdf

[2]   Gilleo, K. (2005) MEMS/MOEMS Packaging: Concepts, Designs, Materials, and Processes. McGraw-Hill Nanoscience and Technology Series, Chicago, NY, 239p.

[3]   Kablov, E.N., et al. (2011) Properties and Use of Highly Aggregated Metal Matrix Composite Material Al-SiC. Bulletin of N.I. Lobachevsky State University, 3-1, 56-59.

[4]   Kablov, E.N., et al. (2012) Manufacturing, Properties and Use of Heatsink Bases from MCM Al-SiC in Power Electronics and Convertor Technology. Aviation Materials and Technologies, 2, 20-23.

[5]   Kablov, E.N., et al. (2012) Metal Matrix Composite Material on the Al-SiC. Aviation Materials and Technologies, 5, 373-380.

[6]   Kablov, E.N., et al. (2010) Enhancement of Power IGBT Module Reliability with the Use High-Aggregated MCM System Al-SiC. Aviation Materials and Technologies, 4, 3-6.

[7]   Kablov, E.N., et al. (2012) Metallic Composite Materials on the Base of Al-SiC for Power Electronics. Mechanics of Composite Materials and Constructions, 18, 359-368.

[8]   Nikandrova, L.I. (1971) Chemical Methods of Metal Coatings. Mashinostroenie, Leningrad, 104.

[9]   Patent Russian Federation No. 2219284 from 18.05.2002, No. 2350687 from 22.05.2007.

[10]   Shakanskas, M. and Vaskalis A. (1985) Chemical Plastic Metallization. Chimiya, Leningrad, 144.

[11]   Nishchev, K.N., et al. (2012) The Use of Metal-Matrix Al-SiC Composites in Heat-Spreading Bases of Power Electronic Devices. Polymer Science Series D, Glues and Sealing Materials, 5, 195-198.
http://dx.doi.org/10.1134/S1995421212030185

[12]   Iliin, V.A. (1977) Dielectrics Metallization. Mashinostroenie, Leningrad, 180.

[13]   Gamburg, Y.D. (1997) Electrochemical Crystallization of Metals and Alloys. Yanus-K, Moscow.

 
 
Top