JBNB  Vol.5 No.3 , July 2014
Supercritical Fluid Impregnation of Essential Bark Oil in Copolymers of L-Lactide with 7-Membered Cyclic Compounds
Abstract: In order to develop a novel controlled-release material, we previously attempted to impregnate poly(L-lactide) (poly(L-LA)), poly(L-LA-ran-CL) (CL: ε-caprolactone) or poly(L-LA-ran-TEMC) (TEMC: tetramethylene carbonate) with low boiling point, organic useful compounds using supercritical carbon dioxide (scCO2) as the solvent. In this work, the factors influencing impregnation of poly (L-LA) random copolymers with useful compounds were investigated under scCO2 using the copolymers previously used. The influence of temperature, pressure, and time on the impregnation contents of the useful compounds on the copolymers was evaluated. The polymer used, which is a base of this material, was poly(L-LA-ran-CL), poly(L-LA-ran-TEMC), or poly(L-LA-ran-DXO) (DXO: 1,5-dioxepan-2-one). Statistical random copolymers of L-LA with CL, TEMC, or DXO were synthesized using Sn(oct)2 as a catalyst at 150°C for 24 h without solvent. Preparation of the controlled-release materials was carried out using essential bark oil from Thujopsis dolabrata var. hondae and synthetic L-LA random copolymers as a base material under scCO2. The impregnation experiment, which investigated the influence of pressure, was conducted in the range of 10 to 20 MPa. The influence of temperature on impregnation was carried out at 40°C to 100°C. Impregnation time was varied from 1 to 5 h. The pressure of essential oil impregnated into poly(L-LA) random copolymers was the highest at 14 MPa. In the influence of temperature on impregnation, the amount of essential oil increased with increasing temperature.
Cite this paper: Tsutsumi, C. , Hara, T. , Ueno, Y. , Nakayama, Y. and Shiono, T. (2014) Supercritical Fluid Impregnation of Essential Bark Oil in Copolymers of L-Lactide with 7-Membered Cyclic Compounds. Journal of Biomaterials and Nanobiotechnology, 5, 159-172. doi: 10.4236/jbnb.2014.53019.

[1]   Arciola, C.R., Campoccia, D., Speziale, P., Montanaro, L. and Costerton, J.W. (2012) Biofilm Formation in Staphylococcus Implant Infections: A Review of Molecular Mechanisms and Implications for Biofilm Resistant Materials. Biomaterials, 33, 5967-5982.

[2]   Vuong, C., Kocianova, S., Voyich, J.M., Yao, Y., Fischer, E.R., Deleo, F.R. and Otto, M. (2004) A Crucial Role for Exopolysaccharide Modification in Bacterial Biofilm Formation, Immune Evasion, and Virulence. The Journal of Biological Chemistry, 279, 54881-54886.

[3]   Oerlemans, C., Deckers, R., Storm, G., Hennink, W.E. and Nijsen, J.F.W. (2013) Evidence for a New Mechanism behind HIFU-Triggered Release from Liposomes. Journal of Controlled Release, 168, 327-333.

[4]   Fredenberg, S., Jönsson, M., Laakso, T., Wahlgren, M., Reslow, M. and Axelsson, A. (2011) Development of Mass Transport Resistance in Poly(Lactide-co-Glycolide) Films and Particles—A Mechanistic Study. International Journal of Pharmaceutics, 409, 194-202.

[5]   Ghassemi, A.H., Steenbergen, M.J., Talsma, H., Nostrum, C.F., Jiskoot, W., Crommelin, D.J.A. and Hennink, W.E. (2009) Preparation and Characterization of Protein Loaded Microspheres Based on a Hydroxylated Aliphatic Polyester, Poly(Lactic-co-Hydroxymethyl Glycolic Acid). Journal of Controlled Release, 138, 57-63.

[6]   Greco, F. and Vicent, M.J. (2009) Combination Therapy: Opportunities and Challenges for Polymer-Drug Conjugates as Anticancer Nanomedicines. Advanced Drug Delivery Reviews, 61, 1203-1213.

[7]   Liu, R., Ma, G.H., Wan, Y.H. and Su, Z.G. (2005) Influence of Process Parameters on the Size Distribution of PLA Microcapsules Prepared by Combining Membrane Emulsification Technique and Double Emulsion-Solvent Evaporation Method. Colloids and Surfaces B: Biointerfaces, 45,144-153.

[8]   Shojaee, S.A., Rajaei, H., Hezave, A.Z., Lashkarbolooki, M. and Esmaeilzadeh, F. (2013) Experimental Investigation and Modeling of the Solubility of Carvedilol in Supercritical Carbon Dioxide. The Journal of Supercritical Fluids, 81, 42-47.

[9]   Machmudah, S., Zakaria, Winardi, S., Sasaki, M., Goto, M., Kusumoto, N. and Hayakawa, K. (2012) Lycopene Extraction from Tomato Peel by-Product Containing Tomato Seed Using Supercritical Carbon Dioxide. Journal of Food Engineering, 108, 290-296.

[10]   Zhou, J., Han, S., Dou, Y., Lu, J., Wang, C., He, H., Li, X. and Zhang, J. (2013) Nanostructured Poly(l-Lactide) Matrix as Novel Platform for Drug Delivery. International Journal of Pharmaceutics, 448, 175-188.

[11]   George, K.A., Chirila, T.V. and Wentrup-Byrne, E. (2012) Effects of Crosslink Density on Hydrolytic Degradation of Poly(l-Lactide)-Based Networks. Polymer Degradation and Stability, 97, 964-971.

[12]   Nelson, M.T., Munj, H.R., Tomasko, D.L. and Lannutti, J.J. (2012) Carbon Dioxide Infusion of Composite Electrospun Fibers for Tissue Engineering. The Journal of Supercritical Fluids, 70, 90-99.

[13]   Elkovitch, M.D., Tomosko, D.L. and Lee, L.J. (1999) Supercritical Carbon Dioxide Assisted Blending of Polystyrene and Poly(Methyl Methacrylate). Polymer Engineering & Science, 39, 2075-2084.

[14]   Sauceau, M., Fages, J., Common, A., Nikitine, C. and Rodier, E. (2011) New Challenges in Polymer Foaming: A Review of Extrusion Processes Assisted by Supercritical Carbon Dioxide. Progress in Polymer Science, 36, 749-766.

[15]   Areerat, S., Nagata, T. and Ohshima, M. (2002) Measurement and Prediction of LDPE/CO2 Solution Viscosity. Polymer Engineering & Science, 42, 2234-2245.

[16]   Yang, J.T., Sang, Y., Chen, F., Fei, Z.D. and Zhong, M.Q. (2012) Synthesis of Silica Particles Grafted with Poly(Ionic Liquid) and Their Nucleation Effect on Microcellular Foaming of Polystyrene Using Supercritical Carbon Dioxide. The Journal of Supercritical Fluids, 62, 197-203.

[17]   Thote, A.J. and Gupta, R.B. (2005) Formation of Nanoparticles of a Hydrophilic Drug Using Supercritical Carbon Dioxide and Microencapsulation for Sustained Release. Nanomedicine: Nanotechnology, Biology and Medicine, 1, 85-90.

[18]   Varona, S., Rodríguez-Rojo, S., Martín, á., Cocero, M.J. and Duarte, C.M.M. (2011) Supercritical Impregnation of Lavandin (Lavandula hybrida) Essential Oil in Modified Starch. The Journal of Supercritical Fluids, 58, 313-319.

[19]   Schnitzler, J. and Egger, R. (1999) Mass Transfer in Polymers in a Supercritical CO2-Atmosphere. The Journal of Supercritical Fluids, 16, 81-92.

[20]   Tsutsumi, C., Hara, T., Fukukawa, N., Oro, K., Hata, K., Nakayama, Y. and Shiono, T. (2012) Incorporation of L-Lactide Random Copolymers with Japanese Cypress Oil (α-Pinene) Using Supercritical Carbon Dioxide. Green Chemistry, 14, 1211-1219.

[21]   Tsutsumi, C., Fukukawa, N., Sakafuji, J., Oro, K., Hata, K., Nakayama, Y. and Shiono, T. (2011) Impregnation of Poly(L-Lactide-ran-Cyclic Carbonate) Copolymers with Useful Compounds with Supercritical Carbon Dioxide. Journal of Applied Polymer Science, 121, 1431-1441.

[22]   Tsutsumi, C., Sakafuji, J., Okada, M., Oro, K. and Hata, K. (2009) Study of Impregnation of poly(L-Lactide-ran-ε-Caprolactone) Copolymers with Useful Compounds in Supercritical Carbon Dioxide. Journal of Materials Science, 44, 3533-3541.

[23]   Maeda, Y., Nakayama, A., Arvanitoyannis, I., Kawasaki, N., Hayashi, K., Yamamoto, N. and Aiba, S. (2000) Synthesis of Characterization of Copoly(Succinic Anhydride-Ethylene Oxide)-Poly(L-Lactide) Block Copolymer. Polymer Journal, 32, 307-315.

[24]   Vanhoorne, P., Dubois, P., Jerome, R. and Teyssie, P. (1992) Macromolecular Engineering of Polylactones and Polylactides. 7. Structural Analysis of Copolyesters of iε-Caprolactone and L- or D,L-Lactide Initiated by Triisopropoxya-luminum. Macromolecules, 25, 37-44.

[25]   Nakayama, Y., Yasuda, H., Yamamoto, K., Tsutsumi, C., Jerome, R. and Lecomte, P. (2005) Comparison of Sm Complexes with Sn Compounds for Syntheses of Copolymers Composed of Lactide and Cyclic Carbonates and Their Bio-degradabilities. Reactive and Functional Polymers, 63, 95-105.

[26]   Tsutsumi, C., Nakagawa, K., Shirahama, H. and Yasuda, H. (2002) Enzymatic Degradations of Copolymers of L-Lactide with Cyclic Carbonates. Macromolecular Bioscience, 2, 223-232.<223::AID-MABI223>3.0.CO;2-D

[27]   Tsutsumi, C. and Yasuda, H. (2001) Biodegradation of Copolymers Composed of Optically Active L-Lactide and (R)- or (S)-1-Methyltrimethylene Carbonate. Journal of Polymer Science Part A: Polymer Chemistry, 39, 3916-3927.

[28]   Watanabe, Y., Shirahama, H. and Yasuda, H. (2004) Syntheses of Random and Block Copolymers of Lactides with 1,5-Dioxepan-2-One and Their Biodegradability. Reactive and Functional Polymers, 59, 211-224.

[29]   Brunetti, L., Daghetta, A., Fedeli, E., Kikic, I. and Zanderighi, L. (1989) Deacidification of Olive Oils by Supercritical Carbon Dioxide. Journal of the American Oil Chemists Society, 66, 209-217.

[30]   Andersson, M.B.O., Demirbuker, M. and Blomberg, L.G. (1997) Semi-Continuous Extraction/Purification of Lipids by Means of Supercritical Fluids. Journal of Chromatography A, 785, 337-343.

[31]   Riha, V. and Brunner, G. (2000) Separation of Fish Oil Ethyl Esters with Supercritical Carbon Dioxide. The Journal of Supercritical Fluids, 17, 55-64.

[32]   Mendes, M.F., Pessoa, F.L.P., Coelho, G.V. and Uller, A.M.C. (2005) Recovery of the High Aggregated Compounds Present in the Deodorizer Distillate of the Vegetable Oils Using Supercritical Fluids. The Journal of Supercritical Fluids, 34, 157-162.

[33]   Moura, J.M.L.N., Goncalves, L.A.G., Sarmento, L.A.V. and Petrus, J.C.C. (2007) Purification of Structured Lipids Using SCCO2 and Membrane Process. Journal of Membrane Science, 299, 138-145.

[34]   Tominaga, Y., Izumi, Y., Kwak, G.H., Asai, S. and Sumita, M. (2003) Effect of Supercritical Carbon Dioxide Processing on Ionic Association and Conduction in a Crystalline Poly(Ethylene Oxide)-LiCF3SO3 Complex. Macromolecules, 36, 8766-8772.