is widely used in LED lighting drivers. In this paper, Boost-Buck main circuit
related characteristics are firstly discussed, and then a new Boost-Buck high
power efficient double loop control strategy is built by adopting error
amplifier and integrator control method. It is demonstrated that the new system
has many advantages such as high efficiency, fast response, strong
anti-interference, good stability after analyses and simulations of its working
Cite this paper
Xu, R. , Li, Y. , Zhong, L. and Liu, J. (2014) Research of an Efficient LED Lighting Driver Based on Boost-Buck Converter. Circuits and Systems
, 153-159. doi: 10.4236/cs.2014.56017
 Lu, J.Y. and Wu, X.B. (2011) A Novel Multiple Modes PWM Controller for LEDs. IEEE Proceedings, Circuits, Devices and Systems, 1767-1770.
 de Britto, J.R., Demian Jr., A.E., de Freitas, L.C., Farias, V.J., Coelho, E.A.A. and Vieira Jr., J.B. (2012) A Proposal of Led Lamp Driver for Universal Input Using Cuk Converter. IEEE Publication, 2640-2644.
 Sauerlander, G. (2007) Solving High-Voltage Off-Line HB-LED Constant-Current Control-Circuit Issues. Applied Power Electrons Conference, APEC 2007-Twenty Second Annual IEEE, Anaheim, 25 February-March 1 2007, 1316-1318.
 Middlebrook, R.D. (2013) Topics in Multiple-Loop Regulators and Current Mode Programming. IEEE Transactions on Power Electronics, PE-2, 109-124. http://dx.doi.org/10.1109/TPEL.1987.4766345
 Zane, R. and Maksimovic, D. (2013) Nonlinear-Carrier Control for High-Power-Factor Rectifiers Based on FLYBACK, CUK or SEPIC Converter. Proceedings of IEEE APEC, 814-820.
 van der Broeck. H., Sauerlander, G. and Wendt, M. (2007) Power Driver Topologies and Conrol Schemes for LEDs. Applied Power Electronics Conference, APEC 2007-Twenty Second Annual IEEE, Anaheim, 25 February-March 1 2007, 1319-1325.
 Rico-Secades, M., Calleja, A.J., Ribas, J., Corominas, E.L., Alonso, J.M., Cardesin, J. and Garcia, J. (2013) Evaluation of a Low Cost Permanent Emergency Lighting System Based on High Efficiency LEDs. IEEE-IAS-2013 38th Annual Meeting, 21-25.
 Bryant, B. and Kazimierczuk, M.K. (2012) Modeling Closed-Current Loop of PWM Boost DC-DC Converters Operating in CCM with Peak Current-Mode Control. IEEE Transactions on Circuits and Systems I: Regular Papers, 52, 2404-2412.
 Ronat, O., Green, P. and Ragona, S. (2013) Accurate Currentcontrol to Drive Highpower LED Strings. IEEE APEC 2013, 2376-2380.
 Steigerwald, D.A., Bhat, J.C., Collins, D., Fletcher, R.M., Holcomb, M.O., Ludowise, M.J., Martin, P.S. and Rudaz, S.L. (2013) Illumination with Solid State Lighting Technology. IEEE Journal of Selected Topics in Quantum Electronics, 8, 310-320.
 Nishikawa, M., Ishizuka, Y., Matsuo, H. and Morihori, K. (2010) Static Characteristics of a Drive Circuit for LED with Constant-Current Control and Constant-luminance Control. IEICE Technical Report EE2010-72(2011-02), 67-72.
 Nishikawa, M., Morihori, K., Ishizuka, Y. and Matsuo, H. (2013) Static Characteristics of A Drive Circuit for LED with Constant-Current Control. Annual Conference of IEI-J, 251.
 Cook, B. (2012) New Developments and Future Trends in High-Efficiency Lighting. Engineering Science and Education Journal, 9, 207-217.
 Greenfeld, F. (2013) White LED Driver Circuits for Off-Line Applications Using Standard PWM Controllers. Intersil Corporation, Application Note, 12-17.
 CUK, S. and Middlebrook, R.D. (2011) Advances in Switched-Mode Power Conversion. IEEE Transactions on Industrial Electronics, IE-30, 10-19.