MSA  Vol.5 No.8 , June 2014
Effects of Heat Treatment on Microhardness of Some Al-Cu Alloy Prepared by Vacuum Coating
ABSTRACT
In this paper binary alloy of Al-Cu with composition Al(100-x)Cux, (x = 10, 15, 20) is prepared by thermal evaporation method. The prepared samples are annealed at different temperatures and investigated by XRD and microhardness method. XRD has been used to show amorphous state of structures and microhrdness tester show the increase in hardness due to the increase in amount of Al in the alloy. SEM and AFM were also used to show information about the surface of the specimen, resulting some densification and relaxation in these specimens.

Cite this paper
Habibi, S. , Jaleh, B. , Namdarmanesh, A. and Shamlo, M. (2014) Effects of Heat Treatment on Microhardness of Some Al-Cu Alloy Prepared by Vacuum Coating. Materials Sciences and Applications, 5, 491-495. doi: 10.4236/msa.2014.58053.
References
[1]   Jiang, W.H. and Atzmon, M. (2006) Mechanically-Assisted Nanocrystallization and Defects in Amourphous Alloys, Scripta Materialia, 54, 333-336.
http://dx.doi.org/10.1016/j.scriptamat.2005.09.052

[2]   Wang, X.F., Wu, X.Q., Lin, J.G. and Ma, M. (2007) The Influence of Heat Treatment on the Corrosion Behaviour of As-Spun Amorphous Al88Ni6La6 Alloy in 0.01 M NaCl Solution. Materials Letters, 61, 1715-1717.
http://dx.doi.org/10.1016/j.matlet.2006.07.186

[3]   Wu, X.Q. and Xie, C.Q. (2008) Influence of Crystallization on Corrosion Resistance of Al86Ni6La6Cu2 Amorphous Alloy. Journal of Rare Earths, 26, 745-748.
http://dx.doi.org/10.1016/S1002-0721(08)60175-1

[4]   Tan, C.-G., Jiang, W.-J., Wu, X.-Q., Wang, X.-F. and Lin, J.-G. (2007) Effect of Crystallization on Corrosion Resistance of Cu22.5Ti30Zr11.5Ni6 Bulk Amorphous Alloy. Transactions of Nonferrous Metals Society of China, 17, 751754.

[5]   Jiang, W.H., Pinkerton, F.E. and Atzmon, M. (2003) Deformation-Induced Nanocrystallization in an Al-Based Amorphous Alloy at a Subambient Temperature. Scripta Materialia, 48, 1195-1200.
http://dx.doi.org/10.1016/S1359-6462(02)00568-7

[6]   Nasir, M., Khan, M. A. M., Husain, M. and Zulfequar, M. (2011) Thermal Properties of Se100-xZnx Glassy System. Materials Sciences and Application, 2, 289-298.
http://dx.doi.org/10.4236/msa.2011.25038

[7]   Kamruzzaman, M., Abu Sayem Karal, M., Saha, D.K. and Khan, F.A. (2012) Crystallization, Transport and Magnetic Properties of the Amorphous (Fe1-xMnx)75P15C10 Alloys. Journal of Crystallization Process and Technology, 2, 105-110.

[8]   Gogebakan, M. and Okumus, M. (2009) Structure and Crystallization Kinetics of Amorphous Al-Ni-Si Alloy. Materials Sience-Poland, 37, 79-87.

[9]   Munoz-Morris, M.A. and Morris, D.G. (2010) Severe Plastic Deformation Processing of Al-Cu-Li Alloy for Enhancing Strength While Maintaining Ductility. Scripta Materialia, 63, 304-307.
http://dx.doi.org/10.1016/j.scriptamat.2010.04.022

[10]   Gao, M.C., et al. (2008) Development of fcc-Al Nanocrystals in Al-Ni-Gd Metallic Glasses during Continuous Heating DSC Scan. Materials Science and Engineering A, 485, 532-543.
http://dx.doi.org/10.1016/j.msea.2007.08.009

[11]   Habibi, S. and Soudmand, M. (2004) Study of Structural Relaxation in Alloys of Metallic Glasses. Surface and Interface Analysis, 36, 929-930.
http://dx.doi.org/10.1002/sia.1802

 
 
Top