OJST  Vol.4 No.6 , June 2014
Flexural Strength of Temporary Restorative Materials Stored in Different Solutions
ABSTRACT
Aim: The aim of this study was to evaluate the effects of different solutions on the flexural strength of one methacrylate-based resin and three bis-acryl resin provisional materials using an in vitro model test system. Methods: The specimens (25 × 2 × 2 mm) were prepared from interim materials and stored for 14 days at 37°C in different solutions (coffee, burn, cola) and distilled water (control group). A standard three-point bending test was conducted on the specimens with an Instron universal testing machine at crosshead speed of 0.5 mm/min. Data were analyzed using the one-way analysis of variance and Tukey HSD multiple comprasion tests. Results: The methacry-late-based resin (Takilon) showed the least fracture strength (61.6 - 85.6 MPa). One of the bis-acryl resins (Protemp 4-3M ESPE) showed the highest fracture strength (112 - 128 MPa). Conclusions: All bis-acryl resin composite materials exhibited high fracture strength over the traditional methyl methacrylate resin throughout the 14 day time interval of investigation. The different solutions have not statistically significant effect on the flexure strength values on four temporary materials.

Cite this paper
Yanikoğlu, N. , Bayindir, F. , Kürklü, D. and Beşir, B. (2014) Flexural Strength of Temporary Restorative Materials Stored in Different Solutions. Open Journal of Stomatology, 4, 291-298. doi: 10.4236/ojst.2014.46041.
References
[1]   Lowe, R.A. (1987) The Art and Science of Provisionalization. The International Journal of Periodontics & Restorative Dentistry, 7, 64-73.

[2]   Baldissara, P., et al. (1998) Comparative Study of the Marginal Microleakage of Six Cements in Fixed Provisional Crowns. Journal of Prosthetic Dentistry, 80, 417-422.
http://dx.doi.org/10.1016/S0022-3913(98)70005-8

[3]   Rosenstiel, S.F. (2001) Contemporary Fixed Prosthodontics. 3rd Edition, Vol. Mosby-Yearbook, St. Louis Missouri, 380.

[4]   Zuccari, A.G., et al. (1997) Reinforcement of Acrylic Resins for Provisional Fixed Restorations. Part II: Changes in Mechanical Properties as a Function of Time and Physical Properties. Bio-Medical Materials and Engineering, 7, 345-355.

[5]   Burns, D.R., Beck, D.A. and Nelson, S.K. (2003) A Review of Selected Dental Literature on Contemporary Provisional Fixed Prosthodontic Treatment: Report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. Journal of Prosthetic Dentistry, 90, 474-497.
http://dx.doi.org/10.1016/S0022-3913(98)70005-8

[6]   Rosenstiel, S.F., Land, M.F. and Fujimoto, J. (2006) Contemporary Fixed Prosthodontics. 4th Edition, St. Louis, Mosby, 96, 466-479.

[7]   Nejatidanesh, F., Lotfi, H.R. and Savabi, O. (2006) Marginal Accuracy of Interim Restorations Fabricated from Four Interim Autopolymerizing Resins. Journal of Prosthetic Dentistry, 95, 364-367.
http://dx.doi.org/10.1016/j.prosdent.2006.02.030

[8]   Krug, R.S. (1975) Temporary Resin Crown and Bridges. Dental Clinics of North America, 19, 313-320.

[9]   Shillinburg, H.T., Hobo, S., Whitsett, L.D., Jacobi, R. and Brackett, S.E. (1997) Provisional Restorations. Fundamentals of Fixed Prosthodontics. 3rd Edition, Quintessence Publishing Co. Inc., Illinois, 225-257.

[10]   Ireland, M.F., Dixon, D.L., Breeding, L.C., et al. (1998) In Vitro Mechanical Property Comparison of Four Resins Used for Fabrication of Provisional Fixed Restorations. Journal of Prosthetic Dentistry, 80, 158-162.
http://dx.doi.org/10.1016/S0022-3913(98)70104-0

[11]   Haselton, D.R., Diaz-Arnold, A.M. and Vargas, M.A. (2002) Flexural Strength of Provisional Crown and Fixed Partial Denture Resins. Journal of Prosthetic Dentistry, 87, 225-228.
http://dx.doi.org/10.1067/mpr.2002.121406

[12]   Diaz-Arnold, A.M., Dunne, J.T. and Jones, A.H. (1999) Microhardness of Provisional Fixed Prosthodontic Materials. Journal of Prosthetic Dentistry, 82, 525-28.
http://dx.doi.org/10.1016/S0022-3913(99)70050-8

[13]   Grave, A.M., Chandler, H.D. and Wolfaardt, J.F. (1985) Denture Base Acrylic Reinforced with High Modulus Fibre. Dental Materials, 1, 185-187.
http://dx.doi.org/10.1016/S0022-3913(99)70050-8

[14]   Young, H.M., Smith, C.T. and Morton, D. (2001) Comparative in Vitro Evaluation of Two Provisional Restorative Materials. Journal of Prosthetic Dentistry, 85, 129-132.
http://dx.doi.org/10.1067/mpr.2001.112797

[15]   Allen, E., Bayne, S., Donovan, T., Hansson, T., Klooster, J. and Kois, J. (1996) Annual Review of Selected Dental Literature. Journal of Prosthetic Dentistry, 76, 56-93.
http://dx.doi.org/10.1016/S0022-3913(96)90347-9

[16]   Galindo, D., Soltys, J.L. and Graser, G.N. (1998) Long-Term Reinforced Fixed Provisional Restorations. Journal of Prosthetic Dentistry, 79, 698-701.
http://dx.doi.org/10.1016/S0022-3913(98)70078-2

[17]   Ireland, M.F., Dixon, D.L., Breeding, L.C. and Ramp, M.H. (1998) In Vitro Mechanical Property Comparison of Four Resins Used for Fabrication of Provisional Fixed Restorations. Journal of Prosthetic Dentistry, 80, 158-162.
http://dx.doi.org/10.1016/S0022-3913(98)70104-0

[18]   Lang, R., Rosentritt, M., Behr, M. and Handel, G. (2003) Fracture Resistance of PMMA and Resin Matrix Composite-Based Interim FPD Materials. The International Journal of Prosthodontics, 16, 381-384.

[19]   Balkenhol, M., Ferger, P., Mautner, M.C. and Wöstmann, B. (2007) Provisional Crown and Fixed Partial Denture Materials: Mechanical Properties and Degree of Conversion. Dental Materials, 23, 1574-1583.
http://dx.doi.org/10.1016/j.dental.2007.06.024

[20]   Craig (2006) Craig’s Restorative Dental Materials. Mosby Elsevier, St. Louis.

[21]   Akova, T., Ozkomur, A., and Uysal, H. (2006) Effect of Food-Simulating Liquids on the Mechanical Properties of Provisional Restorative Materials. Dental Materials, 22, 1130-1134.
http://dx.doi.org/10.1016/j.dental.2005.09.009

[22]   Soderholm, K.J. and Roberts, M.J. (1990) Influence of Water Exposure on the Tensile Strength of Composites. Journal of Dental Research, 69, 1812-1816.
http://dx.doi.org/10.1177/00220345900690120501

[23]   Lee, S.Y., Greener, E.H., Mueller, H.J. and Chiu, C.H. (1994) Effect of Food and Oral Simulating Fluids on Dentine Bond and Composite Strength. Journal of Dentistry, 22, 352-359.
http://dx.doi.org/10.1016/0300-5712(94)90088-4

[24]   Oshida, Y., Hashem, A. and ElSalawy, R. (1995) Some Mechanistic Observation on Water-Deteriorated Dental Composite Resins. Bio-Medical Materials and Engineering, 93, 115.

[25]   Bichacho, N. and Landsberg, C.J. (1997) Single Implant Restorations: Prosthetically Induced Soft Tissue Topography. Pract Periodontics Aesthet Dent, 9, 745-752.

[26]   Stein, J.M. and Nevins, M. (1996) The Relationship of the Guided Gingival Frame to the Provisional Crown for a Single-Implant Restoration. Compendium of Continuing Education in Dentistry, 17, 1175-1182.

[27]   Jemt, T. (1999) Restoring the Gingival Contour by Means of Provisional Resin Crowns after Single-Implant Treatment. The International Journal of Periodontics and Restorative, 19, 20-29

[28]   Savabi, O. and NejatiDanesh, F. (2003) A Method for Fabrication of Temporary Restoration on Solid Abutment of ITI Implants. Journal of Prosthetic Dentistry, 89, 419.
http://dx.doi.org/10.1067/mpr.2003.79

[29]   ANSI/ADA Specification No. 27, Direct Filling Resins. American National Standards Institute, a.D.A.R.

[30]   Wu, W., Toth, E.E., Moffa, J.F. and Ellison, J.A. (1984) Materials Science Subsurface Damage Layer of in Vivo Worn Dental Composite Restorations. Journal of Dental Research, 63, 675-680.
http://jdr.sagepub.com/content/63/5/675
http://dx.doi.org/10.1177/00220345840630051401


[31]   Assmussen, E. (1984) Softening of BIS-GMA Based Polymers by Ethanol and by Organic Acids of Plaque. Scandinavian Journal of Dental Research Odontologist, 92, 257-261.

[32]   Roulet, J.F. and Walti, C. (1984) Influence of Oral Fluid on Composite Resin and Glass-Ionomer Cement. The Journal of Prosthetic Dentistry, 52, 182-189.
http://dx.doi.org/10.1016/0022-3913(84)90092-1

[33]   Yap, A.U.J., Tan, D.T.T., Goh, B.K.C., Kuah, H.G. and Goh, M. (2000) Effects of Food-Simulating Liquids on the Flexural Strength of Composite and Poly-Acid Modified Composite Restoratives. Operative Dentistry, 25, 202-208.

[34]   Yap, A.U.J., Low, J.S. and Ong, L.F.K.L. (2000) Effects of Food-Simulating Liquids on Surface Characteristics of Composite and Poly-Acid Modified Composite Restoratives. Operative Dentistry, 25, 170-176.

[35]   Yap, A.U.J., Le, M.K., Chung, S.M., Tsai, K.T. and Lim, C.T. (2003) Effects of Food-Simulating Liquids on the Shear Punch Strength of Composite and Poly-Acid Modified Composite Restoratives. Operative Dentistry, 28, 529-534.

[36]   Yap, A.U.J., Mah, M.K.S., Lye, C.P.W. and Loh, P.L. (2004) Influence of Dietary Simulating Solvents on the Hardness of Provisional Restorative Materials. Dental Materials, 20, 370-376.
http://dx.doi.org/10.1016/j.dental.2003.06.001

[37]   Nejatidanesh, F., Momeni, G. and Savabi, O. (2009) Flexural Strength of Interim Resin Materials for Fixed Prosthodontics. Journal of Prosthodontics, 18, 507-511.
http://dx.doi.org/10.1111/j.1532-849X.2009.00473.x

[38]   Balkenhola, M., Köhlerb, H., Orbacha, K. and Wöstmanna, B. (2009) Fracture Toughness of Cross-Linked and Non-Cross-Linked Temporary Crown and Fixed Partial Denture Materials. Dental Materials, 25, 917-928.
http://dx.doi.org/10.1016/j.dental.2009.01.099

[39]   Ferracane, J.L., Hopkin, J.K. and Condon, J.R. (1995) Properties of Heat-Treated Composites after Aging in Water. Dental Materials, 11, 354-358.
http://dx.doi.org/10.1016/0109-5641(95)80034-4

[40]   Pilliar, R.M., Smith, D.C. and Maric, B. (1986) Fracture Toughness of Dental Composites Determined Using the Short-Rod Fracture Toughness Test. Journal of Dental Research, 65, 1308-1314.
http://dx.doi.org/10.1177/00220345860650110501

[41]   Kim, S.H. and Watts, D.C. (2004) Effect of Glass-Fiber Reinforcement and Water Storage on Fracture Toughness (KIC) of Polymer-Based Provisional Crown and FPD Materials. The International Journal of Prosthodontics, 17, 318-322.

[42]   Lloyd, C.H. and Adamson, M. (1987) The Development of Fracture Toughness and Fracture Strength in Posterior Restorative Materials. Dental Materials, 3, 225-231.
http://dx.doi.org/10.1016/S0109-5641(87)80077-5

[43]   Kao, E.C. (1989) Influence of Food-Simulating Solvents on Resin Composites and Glass-Ionomer Restorative Cement. Dental Materials, 5, 201-208.
http://dx.doi.org/10.1016/0109-5641(89)90014-6

[44]   Balkenhol, M., Mautner, M.C., Ferger, P. and Wöstmann, B. (2008) Mechanical Properties of Provisional Crown and Bridge Materials: Chemical-Curing versus Dual-Curing Systems. Journal of Dentistry, 36, 15-20.
http://dx.doi.org/10.1016/j.jdent.2007.10.001

[45]   Kim, S.H. and Watts, D.C. (2007) In Vitro Study of Edge-Strength of Provisional Polymer-Based Crown and Fixed Partial Denture Materials. Dental Materials, 23, 1570-1573.
http://dx.doi.org/10.1016/j.dental.2007.06.023

[46]   Poonacha, V., Poonacha, S., Salagundi, B., Rupesh, P.L. and Raghavan, R. (2013) In Vitro Comparison of Flexural Strength and Elastic Modulus of Three Provisional Crown Materials Used in Fixed Prosthodontics. Journal of Clinical and Experimental Dentistry, 5, 212-217.
http://dx.doi.org/10.4317/jced.51136

[47]   Gujjari, A.K., Bhatnagar, V.M. and Basavaraju, R.M. (2013) Color Stability and Flexural Strength of Poly (Methyl Methacrylate) and Bis-Acrylic Composite Based Provisional Crown and Bridge Auto-Polymerizing Resins Exposed to Beverages and Food Dye: An in Vitro Study. Indian Journal of Dental Research, 24, 172-177.

[48]   Zortuk, M., Ozdemir, E. and Aguloglu, S. (2010) Evaluating the Fracture Strength of Three Different Provisional Crowns. Journal of International Dental and Medical Research, 3, 25-28

[49]   Koumjian, J.H. and Nimmo, A. (1990) Evaluation of Fracture Resistance of Resins Used for Provisional Restorations. The Journal of Prosthetic Dentistry, 64, 654-657.
http://dx.doi.org/10.1016/0022-3913(90)90290-S

[50]   Wang, R.L., Moore, B.K., Goodacre, C.J., Swartz, M.L. and Andres, C.J. (1989) A Comparison of Resins for Fabricating Provisional Fixed Restorations. The International Journal of Prosthodontics, 2, 173-184.

[51]   Osman, Y.I. and Owen, C.P. (1993) Flexural Strength of Provisional Restorative Materials. The Journal of Prosthetic Dentistry, 70, 94-96.
http://dx.doi.org/10.1016/0022-3913(93)90038-P

[52]   Ferracane, J.L., Condon, J.R. and Mitchem, J.C. (1992) Evaluation of Subsurface Defects Created during the Finishing of Composites. Journal of Dental Research, 71, 1628-1632.
http://dx.doi.org/10.1177/00220345920710091601

[53]   Drummond, J.L., Zhao, D. and Botsi,s J. (1995) Fracture Mechanisms of Dental Composites. In: Wise, D.L., Trantolo, D.J., Altobelli, D.E., Yaszemski, M.J., Gresser, J.D. and Schwartz, E.R., Eds., Encyclopedic Handbook of Biomaterials and Bioengineering, Marcel Dekker, New York, 1665-1696.

[54]   McKinney, J.E. and Wu, W. (1982) Relationship between Subsurface Damage and Wear of Dental Restorative Composites. Journal of Dental Research, 61, 1083-1088.
http://dx.doi.org/10.1177/00220345820610091101

[55]   Lloyd, C.H. (1982) The Fracture Toughness of Dental Composites. II. The Environmental and Temperature Dependence of the Stress Intensification Factor (KIC). Journal of Oral Rehabilitation, 9, 133-138.
http://dx.doi.org/10.1111/j.1365-2842.1982.tb00543.x

 
 
Top