The Crevice Corrosion of 316L SS Alloy in NaCl Solution at Different Applied Potentials

Sanaa T.  Arab; Mohammed I.  Abdulsalam; Huda M.  Alghamdi; Khadijah M.  Emran

doi:10.4236/ojpc.2014.42008

Journals by Subject

Journals by Title

OJPC Vol.4 No.2 , May 2014

The Crevice Corrosion of 316L SS Alloy in NaCl Solution at Different Applied Potentials

Sanaa T. Arab, Mohammed I. Abdulsalam, Huda M. Alghamdi, Khadijah M. Emran

Abstract: 316L SS alloy was tested under different applied potentials to study the susceptibility of this alloy to crevice corrosion. XPS measurements have been carried out to detect and define the products which formed on the surface of 316L SS in 3.5% NaCl at room temperature at applied potential = 200 mVSCE. The formation of Fe, Cr and Mo compounds were found, and these compounds play a great role in protecting the alloy which was found. The boundaries of the corroded area under washer teeth are in agreement with IR drop. The potentiodynamic technique is also studied to examine the overall corrosion behavior of 316L SS.

Keywords: Crevice Corrosion, 316L SS, Applied Potentials, Potentiostatic Measurements, Potentiodynamic Measurements, XPS Measurement, IR Drop

Cite this paper: Arab, S. , Abdulsalam, M. , Alghamdi, H. and Emran, K. (2014) The Crevice Corrosion of 316L SS Alloy in NaCl Solution at Different Applied Potentials. Open Journal of Physical Chemistry, 4, 52-59. doi: 10.4236/ojpc.2014.42008.

References

[1] Nicastro, D.H. (1997) Failure Mechanisms in Building Construction. ACSE.
http://dx.doi.org/10.1061/9780784402832

[2] Al-Zahrani, A.M. and Pickering, H.W. (2005) Electrochim. Acta, 50, 3420.

[3] Cho, K. and Pickering, W. (1990) Demonstration of Crevice Corrosion in Alkaline Solution without Acidification. Journal of the Electrochemical Society, 137, 3313-3314.
http://dx.doi.org/10.1149/1.2086211

[4] Fontana, M.G. (1986) Corrosion Engineering. 3rd Edition, McGraw-Hill Book Co., New York.

[5] Sundararajan, T., Akiyama, E. and Tsuzaki, K. (2005) Hydrogen Mapping across a Crevice: Effect of Applied Potential. Scripta Materialia, 53, 1219-1223.
http://dx.doi.org/10.1016/j.scriptamat.2005.08.016

[6] Watson, M. and Postlethwaite, J. (1990) Numerical Simulation of Crevice Corrosion of Stainless Steels and Nickel Alloys in Chloride Solutions. Corrosion, 46, 522-530. http://dx.doi.org/10.5006/1.3585142

[7] Cho, K. and Pickering, H.W. (1991) The Role of Chloride Ions in the IR > IR* Criterion for Crevice Corrosion in Iron. Journal of the Electrochemical Society, 138, L56-L58.
http://dx.doi.org/10.1149/1.2085386

[8] Pickering, H.W. (2003) Important Early Developments and Current Understanding of the IR Mechanism of Localized Corrosion. Journal of the Electrochemical Society, 150, K1-K13.
http://dx.doi.org/10.1149/1.1565142

[9] Abdulsalam, M.I. (2005) Behaviour of Crevice Corrosion in Iron. Corrosion Science, 47, 1336-1351. http://dx.doi.org/10.1016/j.corsci.2004.08.001

[10] Pickering, H.W., Cho, K. and Nystrom, E. (1993) Microscopic and Local Probe Method for Studying Crevice Corrosion and Its Application to Iron and Stainless Steel. Corrosion Science, 35, 775-781. http://dx.doi.org/10.1016/0010-938X(93)90215-3

[11] Xu, Y., Wang, M. and Pickering, H.W. (1993) On Electric Field Induced Breakdown of Passive Films and the Mechanism of Pitting Corrosion. Journal of the Electrochemical Society, 140, 3448-3457.
http://dx.doi.org/10.1149/1.2221108

[12] Xu, Y. and Pickering, H.W. (1993) The Initial Potential and Current Distributions of the Crevice Corrosion Process. Journal of the Electrochemical Society, 140, 658-668.
http://dx.doi.org/10.1149/1.2056139

[13] ASTM G 5-94 (2009) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements.

[14] Kelly, R.G. and Stewart, K.C. (2001) Combining the Ohmic Drop and Critical Crevice Solution Approaches to Rationalize Intermediate Attack in Crevice Corrosion. In: Luo, J.L. and Rodda, J.R., Eds., Passivity of Metals and Semiconductors, The Electrochemical Society, Pennington, 547.

[15] Cho, K., Abdulsalam, M.I. and Pickering, H.W. (1998) The Effect of Electrolyte Properties on the Mechanism of Crevice Corrosion in Pure Iron. Journal of the Electrochemical Society, 145, 1862-1869. http://dx.doi.org/10.1149/1.1838568

[16] Razavi, G.R., Gholami, H., Zirepour, G.R., Zamani, D., Saboktakin, M. and Monajati, H. (2011) Study Corrosion of High-Mn Steels with Mo in 3.5% NaCl Solution. 2011 International Conference on Advanced Materials Engineering IPCSIT, 15, 36.

[17] Mareci, D., Roma?, M., C?ilean, A. and Sutiman, D. (2011) Electrochemical Studies of Cobalt-Chromium-Molybdenum Alloys In Artificial Saliva. Revue Roumaine de Chimie, 56, 697-704.